Albright relay SW200 12VDC with bracket

Albright relay SW200 12VDC with bracket

Albright relay SW200 12VDC with bracket

The SW200 series is designed for DC loads, including motors used on electric vehicles such as industrial trucks. Designed for both intermittent and continuous loads, the SW200 is suitable for switching resistive, capacitive, and inductive loads. The SW200 features single-pole, single-throw, double-break main contacts with silver alloy tips, which are weld-resistant, wear-resistant, and offer excellent conductivity. The SW200 has M10 stud main connections and 6.3 mm spade coil connections. It can be mounted via M5 tapped holes or mounting brackets – either supplied assembled or as separate parts. Mounting can be horizontal or vertical; when vertical, the M10 contact studs should face upwards. If downwards is required, the switch can be adjusted to compensate. SW200 Technical Information: Application | Interrupted rating (Ith) | Uninterrupted rating (Ith) Thermal Current Rating 250A 400A Intermittent Current Rating: 30% Duty 455A 730A 40% Duty 395A 630A 50% Duty 355A 565A 60% Duty 325A 515A 70% Duty 300A 480A Maximum Recommended Contact Voltages Blowouts: 96V 96V No Blowouts: 48V 60V Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant:(In accordance with UL583*) Blowouts:1500A at 96V DC No Blowouts:1500A at 48V DC Rated Fault Current Breaking Capacity (Icn) Resistive Load:(In accordance with UL508*) Blowouts:600A at 96V DC No Blowouts: 600A at 60V DC Typical Voltage Drop per pole across New Contacts at 250A 40mV Mechanical Durability: > 5,000,000 Cycles Coil Voltage Available (Us) (Rectifier board required for AC): 6 – 240V

We'd be happy to provide you with more information about this product. Please contact us.