Econnect DC Bus Control & Monitoring Unit 12/24V

Econnect DC Bus Control & Monitoring Unit 12/24V

Econnect DC Bus Control & Monitoring Unit 12/24V

The EConnect includes the following features: • DC Bus Control & Monitoring for vehicle systems with a VE Lithium Smart Battery • DC Bus Control & Monitoring for vehicle systems with a Lead-Acid (VRLA) Battery • Euro 5/6 Buck-Boost DC-DC Converter (max. 70A) with 3-Stage Charging Algorithm (Bulk – Absorption – Float) • Vibration Sensor for Motor Run Detection • Insulation Monitor • 230VAC Shore Power Detection & Converter/Charger Detection • Battery Monitor • High Power Shunt in the Plus+ connection (max. 300A) • Low Current Shunt for no-load (mA) measurement (max. 500mA) • No-load reduction control to less than 2mA • Real-time Clock • Timer function for switching off the system during non-use • MPPT Charge Controller connection with integrated 25A Fuse and Current Measurement (max. 20A) • Alarm buzzer with adjustable conditions • Internal Temperature Sensors (4x) • Automatic DC fuses (4x PPTC Polyfuse) in the power outputs • 1x MEGA Fuse holder in the Battery connection (max. 300A) • 1x MEGA Fuse holder in the Inverter/charger connection (max. 250A) • 1x DC Output (max. 50A) switchable via FET • RGB LEDs (3x) on the housing for Status indications • Remote control with large display screen • Cooling fan option for high power use • BMS Charge Disconnect & Load Disconnect Outputs • VE.Direct Port for Real Time data logging online, via the Victron VRM website • USB connection for configuration, monitoring, firmware updates, etc. • 2x TS Canbus connection • External Temperature Sensor connection • 3x Input/output configurable as input or output. Output is 2x 1A and 1x 10A, switchable (for powerdown) • 2x Output 1-10A adjustable, equipped with MOSFET (Adjustable) fuse • 2x Input for e.g. a Motor Run signal and Contact On/Off. Inputs can also be configured as Analog inputs • 2x Potential-free (NO) contact for Remote connection for the Inverter/Charger (max. 100mA via fuse) • Logbook storage of all events/measurement values ​​• EMI Reduction Filters on all inputs and outputs. In mobile energy systems with a VE Lithium Smart battery, an EConnect replaces the following system components: • TS400 or TS800 Euro 5/6 Buck-Boost DC-DC Inverter • Victron BMV700 Battery Monitor • Victron BMV700 Shunt 500A • Victron Digital Multi Control & VE.Bus Communication Cable • Victron AC Mains Detector & VE.Bus Communication Cable • TS BMS Safety Relay • Insulation Monitor • Victron VE.Direct Non-Inverting Remote On/Off Cable (MPPT)

We'd be happy to provide you with more information about this product. Please contact us.