Victron Blue Smart IP22 Battery Charger 12/20 (3) 120V NEMA 5-15

Victron Blue Smart IP22 Battery Charger 12/20 (3) 120V NEMA 5-15

Victron Blue Smart IP22 Battery Charger 12/20 (3) 120V NEMA 5-15

The Victron BlueSmart IP22 12/20 (3) battery charger 120V NEMA 5-15 is intended for charging 12V battery systems from 120VAC. The charging current of this charger is 20A according to a six-stage adaptive intelligent charging algorithm, which can be used to charge 12V battery systems with a battery capacity between 100Ah and 200Ah. The charger is equipped with 1.5 meters of 120V cable with a NEMA 5-15 earthed plug for 5-15 sockets. All IP22 models have a plastic – aluminum housing with brackets for easy mounting. Battery cables (not included) can be connected to 13 mm² screw terminals. The compact design ensures that the Blue Smart IP22 battery chargers can be easily installed for indoor use in many environments, such as a garage, shed, shed, or in a boat or camper. Bluetooth Smart The Blue Smart IP22 battery charger is the wireless solution to monitor the voltage and current, to change the settings and to update the battery charger when new features become available. Highly efficient With an efficiency of up to 94%, these battery chargers generate up to four times less heat compared to the industry standard. And once the battery is fully charged, power consumption drops to 0.5W. That is even five to ten times better than the industry standard. Adaptive 6-stage charging algorithm The adaptive six-stage charging algorithm consists of: test – bulk charge – absorption charge – reconditioning – trickle charge – storage. The Blue Smart charger is equipped with microprocessor-controlled 'adaptive' battery management. The adaptive function automatically optimizes the charging process depending on how the battery is used. Storage mode Storage mode reduces maintenance and aging when the battery is not in use. Storage mode is activated if the battery is not discharged for 24 hours. In that case, the driving voltage is reduced to 2.2V/cell (13.2V for 12V battery) to minimize gas formation and corrosion of the positive plates. Once a week the voltage is increased again to absorption level to 'recharge' the battery. This prevents electrolyte stratification and sulphation, the main cause of premature battery failure. Suitable for lithium-ion (LiFePO₄) batteries LiFePO₄ batteries are charged with a simple algorithm of bulk charging – absorption charging – trickle charging. NIGHT and LOW setting In NIGHT (night) or LOW (low current) mode, the output current is reduced to max. 50% of the nominal output current and the battery charger becomes completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be ended manually. Protected against overheating The output current decreases when the temperature rises to 50ºC, but the Blue Smart charger does not fail. Eleven LEDs for status indication Charging algorithm: TEST / BULK CHARGE / ABSORPTION CHARGE / RECONDITIONING / DRILL CHARGE / STORAGE / READY MODE button for setting: NORMAL (14.4V) / HIGH (14.7V) / RECONDITIONING / LI-ION

We'd be happy to provide you with more information about this product. Please contact us.