Victron BlueSolar MPPT 100/15 (12/24V)

Victron BlueSolar MPPT 100/15 (12/24V)

Victron BlueSolar MPPT 100/15 (12/24V)

Victron BlueSolar MPPT 100/15 12/24V is a solar charger for 12V or 24V systems (autoselect). The maximum nominal PV power transmitted by the solar charger at a 12V system voltage is 220W, and at a 24V system voltage it is 440W. The maximum PV no-load voltage of this solar charger is 100V. The BlueSolar solar charge controllers have a programmable battery charging algorithm. To set up the solar charger, a Victron VE.Direct Bluetooth Smart dongle or a Victron VE.Direct to USB interface cable is required. VE.Direct For a wired data connection to a Color Control panel, Venus GX, PC or other devices. Ultra-fast Maximum Power Point Tracking (MPPT) Especially when it is cloudy and light intensity is constantly changing, an ultra-fast MPPT controller improves energy harvest by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers. BatteryLife: intelligent battery management If a solar charge controller cannot fully recharge the battery in one day, the result is often that the battery constantly fluctuates between 'partially charged' and 'fully discharged'. This condition (no regular full charge) will cause a lead-acid battery to become irreparably damaged within weeks or months. The BatteryLife algorithm monitors the battery's state of charge and, if necessary, increases the load disconnection level slightly from day to day (by disconnecting the load earlier) until the harvested solar energy is sufficient to charge the battery to almost full 100% to charge. From then on, the load disconnect level is modulated so that the battery is charged to almost 100% approximately once a week. Programmable battery charging algorithm The charge controller starts a new charging cycle every morning, as soon as the sun starts to shine, based on a three-step charging process: Bulk – Absorption – Float. The battery charging algorithm is programmable with a set of default settings or user-defined settings. Internal temperature sensor Compensates absorption and float charge voltages for temperature. Load output An excessive discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the load when the battery is discharged to a preset voltage. (48V model: interface with a relay) Alternatively, the BatteryLife intelligent battery management algorithm can be selected. The load output can be configured via Bluetooth or via VE.Direct and is short-circuit proof. Day/night timing and light dimming option The Streetlight function allows you to automatically control the night lights, timing and dimming option. When the Street Lights function is enabled, a timer program can be created using 'sunset' and 'sunrise' as anchor points for the timer program. The advantage of this is that the program adapts to the duration of the night because it changes with the season.

We'd be happy to provide you with more information about this product. Please contact us.