Victron BlueSolar MPPT 100/30 (12/24V)

Victron BlueSolar MPPT 100/30 (12/24V)

Victron BlueSolar MPPT 100/30 (12/24V)

The Victron BlueSolar MPPT 100/30 12/24V is a solar charger for 12V or 24V systems (autoselect). The maximum nominal PV power output of the solar charger at a 12V system voltage is 440W, and at a 24V system voltage, it is 880W. The maximum PV open circuit voltage of this solar charger is 100V. The BlueSolar solar charge controllers have a programmable battery charge algorithm. To configure the solar charger, a Victron VE.Direct Bluetooth Smart dongle or a Victron VE.Direct to USB interface cable is required. VE.Direct provides a wired data connection to a Color Control panel, Venus GX, PC, or other device. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in cloudy conditions when light intensity is changing continuously, an ultra-fast MPPT controller can improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of variable shading In case of variable shading, the power-voltage curve can contain two or more maximum power points. Conventional MPPTs tend to use a local MPP, which may not be the optimal MPP. The innovative BlueSolar algorithm always maximizes energy harvest by using the optimal MPP. BatteryLife: intelligent battery management If a solar charge controller cannot fully recharge a battery within a single day, the result is often that the battery constantly fluctuates between 'partially charged' and 'fully discharged'. This state (lack of regular full charging) will irreparably damage a lead-acid battery within a few weeks or months. The BatteryLife algorithm monitors the battery’s state of charge and, if necessary, slightly increases the load disconnect level day by day (by disconnecting the load earlier) until the harvested solar energy is sufficient to charge the battery close to 100%. From that point on, the load disconnect level is modulated so that the battery is charged close to 100% approximately once per week. Programmable battery charge algorithm Every morning, as soon as the sun starts to shine, the charge controller starts a new charge cycle based on a three-step charging process: Bulk – Absorption – Float. The battery charge algorithm is programmable with a set of default settings or user-defined settings. Internal temperature sensor Compensates absorption and float charge voltages for temperature.

We'd be happy to provide you with more information about this product. Please contact us.