Victron SmartSolar MPPT 100/20 (12/24/48V)

Victron SmartSolar MPPT 100/20 (12/24/48V)

Victron SmartSolar MPPT 100/20 (12/24/48V)

The Victron SmartSolar MPPT 100/20 12/24/48V is a solar charger for 12V, 24V, and 48V systems (autoselect). The maximum nominal PV power output of the solar charger is 290W at a 12V system voltage, 580W at a 24V system voltage, and 1160W at a 48V system voltage. The maximum PV no-load voltage of this solar charger is 100V. The SmartSolar solar charge controllers feature a programmable battery charge algorithm and standard integrated Bluetooth Smart for setting up the solar charger and monitoring solar yield. Bluetooth Smart integrated: no dongle required. The wireless solution for setting up, monitoring, and updating the controller via Apple or Android smartphones, tablets, or other devices. VE.Direct For a wired data connection to a Color Control panel, Venus GX, PC, or other device. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in cloudy conditions when light intensity is changing continuously, an ultra-fast MPPT controller can improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. BatteryLife: intelligent battery management If a solar charge controller cannot fully recharge a battery within a single day, the result is often that the battery constantly fluctuates between 'partially charged' and 'fully discharged'. This state (lack of regular full charging) will irreparably damage a lead-acid battery within a few weeks or months. The BatteryLife algorithm monitors the battery's state of charge and, if necessary, slightly increases the load disconnect level (disconnecting the load earlier) from day to day until the harvested solar energy is sufficient to charge the battery close to 100%. From that moment on, the load disconnect level is modulated so that the battery is charged close to 100% approximately once per week. Programmable battery charge algorithm Every morning, as soon as the sun starts to shine, the charge controller starts a new charge cycle based on a three-step charging process: Bulk – Absorption – Float. The battery charge algorithm is programmable with a set of default settings or user-defined settings. Internal temperature sensor Compensates absorption and float charge voltages for temperature. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the load when the battery is discharged to a preset voltage. (48V model: interface with a relay) Alternatively, the BatteryLife intelligent battery management algorithm can be selected. The load output can be configured via Bluetooth or VE.Direct and is short-circuit proof. Day/night timing and light dimming option The Streetlight function allows you to automatically control the night light, timing and dimming option. When the Street Lighting function is enabled, a timer program can be created using sunset and sunrise as the anchor points for the timer program. The advantage of this is that the program adapts to the length of the night as it changes with the season.

We'd be happy to provide you with more information about this product. Please contact us.