Available via backorder
€ 200,86
Victron VE.Bus BMS NG – for NG batteries! – We're happy to provide you with more information about this product. Please contact us.
Available via backorder
Victron Ve.bus BMS NG-For NG batteries!
The Victron Ve.bus BMS NG is the newest generation Battery Management System (BMS) from Victron Energy, specially designed for monitoring and securing Victron Lithium NG batteries (Lifepo4). The Ve.bus BMS NG has been developed for complete integration with Victron Ve.bus products such as the MultiPlus, Quattro and Easysolar. The module automatically switches off inverters or chargers with different values and can be connected to external signaling or relay for additional system security. Based on the status of the Lithium NG battery, the BMS: • Give an instructor to indicate an imminent too low voltage of the cell • In the event of too low cell voltage, the connected VE.Bans inverters or inverter/chargers can be switched off via Ve.bus and switch off other loads via the 'load (disconnect)' connecting. • In the event of too high voltage of a cell, too low temperature or too high temperature Ve.bus inverters or inverter/chargers, switch off V.Bus, VE.Direct and VE.CAN PV chargers disable a GX device and switch off other chargers via the "Charge (disconnect)" Connecting clamp. This module is indispensable for the safe operation of Victron Lithium NG systems in combination with powerful inverter/charger combinations. Ideal for applications in campers, boats, off-grid homes and industrial installations. Belangrijkste producteigenschappen: Compatibel met Victron NG Lithium LiFePO4-accu's Beveiligt tegen over-/onderspanning, over-/ondertemperatuur Sturing van VE.Bus omvormers via communicatiekabel Geschikt voor professioneel energiebeheer Overzicht van kenmerken: • Bluetooth Smart: De VE.Bus BMS NG heeft Bluetooth Smart voor draadloze instelling, bewaking en firmware-updates via The VictronConnectApp. Instant Readout (read directly) shows important data such as loading status, battery temperature, warnings and alarms, directly in the equipment list, without having to connect. • Expendant to disconnect the load: controls the remote on/out of a battery protect, inverters, DC DC converter, or other loads with remote on/off functionality. Thanks to the maximum output current of 1 A, it can even control a high-stream or a magnetic switch. Please note that a non-inverted or inverting on/off cable may be required, consult the manual. • Charge (Disconnect):-Extends the remote on/off of chargers such as the Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-CT battery combiner or a battery protect. Note that the charge output is not suitable for feeding an inductive load such as a relay coil. • Pre alarm output: Start a visible or audible warning halls The battery voltage is low, remains on for at least 30 seconds before the load disconnect output is switched off by low cell voltage. Can control a relay, LED or buzzer. Maximum output current: 1 a (not protected against short circuit). • Remote on/off Connection clamp: makes remote control of the load and charge outputs possible. If switched off, both outputs are freely floating, which eliminates connected loads and chargers. • LED indicators: the V.Bus BMS NG has two LEDs: a blue LED for Bluetooth status and a red LED for warnings and alarm errors and a VE.Bus status LED. • Communication with V.Bus products: Multiplus, Quattro or inverters connect to the 'Multiplus/Quattro' port with a standard RJ45 UTP cable. The BMS eliminates the inverter in the case of a cell with low voltage and switches the charging in the case of a cell with too high voltage or temperature. • Communication with remote devices :: A GX device (such as a Cerbo GX), Digital Multi Control (DMC) panel or a VE.bus Smart Dongle (including each combination) can be connected to the BMS via the "Remote Panel" port. These accessories can all be used in combination with the BMS to change remote de ve.bus inverter or inverter/charger charger status (on/off/charger only). • Additional nutrition and output stalk
We'd be happy to provide you with more information about this product. Please contact us.
robust-mt.nl