EasySolar-II 48/3000/35-32 MPPT 250/70 GX

EasySolar-II 48/3000/35-32 MPPT 250/70 GX

EasySolar-II 48/3000/35-32 MPPT 250/70 GX Applications At 48 V, twice as much PV can be installed on the same cabinet: up to 4000 Wp. The inverter/charger, SmartSolar MPPT, and GX device are pre-wired in a single housing, with a display, Wi-Fi, and access to the VRM Portal. The standard choice for a home battery. * Home battery and ESS installations with their own solar panels * Off-grid homes, chalets, and recreational properties on 48 V * Backup systems where critical circuits must continue operating during a power outage * Commercial buildings and project sites with limited grid connection * Installations where self-consumption of solar power is the primary What's inside the cabinet * MultiPlus-II inverter/battery charger 48/3000/35-32 * SmartSolar MPPT 250/70-Tr solar charger, with the DC output wired in parallel with the inverter * GX device with a 2 x 16 character display, which controls the MultiPlus-II via VE.Bus and the MPPT via VE.Direct * The on/off switch of the MultiPlus-II also operates the solar charger Inverter, PowerControl, and PowerAssist * 3000 VA nominal; 2400 W continuous at 25 °C, 2200 W at 40 °C, 1700 W at 55 °C * 5500 W peak power * Output voltage 230 VAC ±2 %, frequency 50 Hz ±0.1 %, adjustable to 60 Hz * Changeover switch 32 A, maximum AC input current 32 A, auxiliary output 32 A for non-critical groups * PowerControl and PowerAssist: the inverter limits the mains current and supplements when the connection or generator falls short * Maximum feed-in power 2470 W / 3000 VA * Maximum efficiency 95 % * No-load power 11 W, in AES mode 7 W, in search mode 2 W Battery charger * AC input 187 – 265 VAC, 45 – 65 Hz * Maximum charging current 35 A * Absorption 57.6 V, trickle charge 55.2 V, storage mode 52.8 V * Battery temperature sensor optional, item number ASS000001000 * Programmable relay for general alarm, DC undervoltage, or generator start; 230 V / 4 A AC, 4 A up to 35 VDC and 1 A up to 60 VDC SmartSolar MPPT 250/70 * Maximum charging current 70 A * Maximum 4000 Wp PV power, maximum PV open-circuit voltage 250 V * Maximum efficiency 99 %, self-consumption 20 mA * PV connection on M6 bolts, therefore with cable lugs instead of MC4 connectors GX device and monitoring * 2 x 16 character display for battery, inverter, and solar charger data * Wi-Fi for reading and configuring via smartphone or tablet * BMS-Can for a managed CAN-bus lithium system; Note: this is not a VE.Can port * USB port, Ethernet port, VE.Direct port and two general purpose ports * Access to the VRM Portal – Victron Energy (https://www.victronenergy.com/panel-systems-remote-monitoring/vrm) for remote monitoring, changing settings, and email alarms Self-consumption and feed-in With an external current sensor or energy meter, the system controls self-consumption, and feed-in can be limited or blocked. In the event of a power outage, the unit disconnects from the grid and the critical groups continue to operate; connect the groups that can be switched off to the auxiliary output. Connection and mounting * Input voltage range 38 – 66 V * Battery connection to M8 bolts, PV to M6 bolts, 230 V to screw terminals up to 16 mm² * Remote on/off connection available * Protected against short circuit, overload, over- and under-battery voltage, over-temperature, 230 VAC on the inverter output, and excessive ripple voltage * Aluminum housing, protection class IP21; exclusively dry, indoor installation * Operating temperature -20 to +45 °C with fan cooling, maximum installation altitude 2000 m Available to order directly The battery temperature sensor is optional with this version (ASS000001000). The external 100 A current sensor is required to use PowerControl, PowerAssist, and self-consumption control with external measurement. For configuration via PC, the MK3-USB VE.Bus-to-USB interface is required: see Installation > Interface (https://shop.top.systems/installatie/interface/). You can find energy meters under Installation > Energy meters (https://shop.top.systems/installatie/energiemeters/), solar panels and PV cabling under Solar power > Solar panels (https://shop.top.systems/zonnestroom/zonnepanelen/) and Cables > Solar (https://shop.top.systems/installatie/kabels/solar/), and a DC fuse with holder under Fuses (https://shop.top.systems/beveiligen-schakelen/zekeringen/). Documentation * Datasheet EasySolar-II 3kVA MPPT 250/70 GX and 5kVA MPPT 250/100 GX (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-EasySolar-II-24V-48V-3kVA-48V-5kVA-MPPT-250-70-100-GX-EN.pdf) * Manual EasySolar-II GX (EN, PDF) (https://www.victronenergy.com/upload/documents/EasySolar-II_GX/EasySolar-II_GX-en.pdf) * Manual EasySolar-II GX (EN, HTML5) (https://www.victronenergy.com/media/pg/EasySolar-II_GX/en/index-en.html) * ISO 9001 certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) * ESS Design and Installation Manual (EN, HTML5) (https://www.victronenergy.com/media/pg/Energy_Storage_System/en/index-en.html) * VE.Bus Error Codes (EN) (https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes) Contact In an ESS installation, the grid code, battery selection, and connection measurement determine whether the system performs as it should. As an official Victron distributor, we supply from our own stock in Bodegraven and directly from the Victron Energy warehouse, and our engineers calculate the complete system for you. Contact us (https://www.top.systems/nl/contact/) for advice or a quotation. Specifications System voltage 48 Vdc Inverter nominal power 3000 VA Continuous power at 25 °C 2400 W Continuous power at 40 °C 2200 W Continuous power at 55 °C 1700 W Peak power 5500 W Maximum feed-in capacity 2470 W / 3000 VA Output voltage 230 VAC ±2 % Frequency 50 Hz ±0.1 %, adjustable to 60 Hz Input voltage range 38 – 66 V Transfer switch 32 A Maximum AC input current 32 A Auxiliary output 32 A PowerControl and PowerAssist Yes Maximum inverter efficiency 95 % No-load power 11 W No-load power in AES mode 7 W No-load power in search mode 2 W Maximum charging current 35 A Acceptance charging voltage 57.6 V Trickle charging charging voltage 55.2 V Storage mode 52.8 V AC input 187 – 265 VAC, 45 – 65 Hz Battery temperature sensor Optional, ASS000001000 Solar charger SmartSolar MPPT 250/70-Tr Maximum charging current solar charger 70 A Maximum PV power 4000 Wp Maximum PV open-circuit voltage 250 V Maximum efficiency solar charger 99 % Solar charger self-consumption 20 mA Interfaces BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi Inverter communication VE.Bus Programmable relay Yes; 230 V / 4 A AC, 4 A up to 35 VDC, 1 A up to 60 VDC Remote on/off: Yes Battery connection: M8 bolts PV connection, M6 bolts AC connection Screw terminals up to 16 mm² Protection class: IP21 Operating temperature: -20 to +45 °C, fan cooling Maximum installation height: 2000 m Humidity: Maximum 95 %, non-condensing Dimensions (HxWxD): 499 x 268 x 237 mm Weight: 26 kg Housing: Aluminium Safety standards: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 EMCEN standards: 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Brand Victron Energy Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.