Multi RS 48/6000/100-20 230V
Multi RS 48/6000/100-20 230V Applications For emergency power, self-sufficient installations, and hybrid systems where you want to choose the PV solution yourself. High-frequency technology delivers 6 kVA from a unit weighing over eleven kilograms, with high efficiency, low standby consumption, and very quiet operation. Operating modes * Backup mode: switches to the battery bank during a mains power outage. * Self-sufficient mode: operates without a grid connection. * Generator mode: controls the generator to minimize operating hours and supplements deficits from the battery bank. Without integrated MPPT This version does not have a built-in solar charge controller. PV capacity is added using separate MPPT charge controllers on the DC side, or with PV inverters on the AC output; their output power is automatically regulated via the integrated frequency shift. PowerControl and PowerAssist Set the maximum grid or generator current; charging only occurs with what remains, so that the source does not become overloaded. In the event of short-term peaks, the battery bank immediately replenishes the deficit, and the excess power is subsequently used for charging. Power The continuous output power at 25 °C increases linearly from 4600 W at 46 V DC to 5200 W at 52 V DC, with 4500 W at 40 °C and 3000 W at 65 °C. The peak power is 9 kW for 3 seconds and 7 kW for 4 minutes. Efficiency 96.5% at a 1 kW load and 94% at 5 kW. Two AC outputs AC-out-1 operates uninterrupted. AC-out-2 is directly connected to the AC input and is intended for non-critical loads, such as an electric water heater; this load is counted by PowerControl and PowerAssist. Battery Charger Adjustable charging voltage range from 36 to 60 V, standard absorption 57.6 V, and trickle charge 55.2 V. Maximum AC charging current 88 A at 57.6 V DC. Battery temperature sensor included, battery voltage sensor present. Empty battery shutdown at 37.2 V and restart at 43.6 V, both adjustable. Display, Bluetooth, and VictronConnect The built-in display shows battery and inverter parameters. The same values can be retrieved via Bluetooth using a smartphone or tablet in the VictronConnect app, which is also used to change settings and update firmware. Communication and I/O VE.Can for connection to a GX communication center, energy meter, data logging, and remote firmware updates; VE.Direct for a GlobalLink 520. Furthermore, two programmable analog/digital ports, a programmable relay, connections for temperature and voltage sensors, and a remote on/off input. The system can be monitored via a GX device in the VRM Portal – Victron Energy (https://vrm.victronenergy.com). 3-phase operation is supported with one unit per phase. Parallel connection is not possible. Grounding is required exclusively in TN and TT systems. Can be ordered directly with this * Red battery cable 70mm² per meter, KABRD0107000 – go to the article (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD0107000) | category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Battery cable black 70mm² per meter, KABZW0107000 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW0107000) | category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Battery cable adapter red 70mm² 150cm M8-M8, KABRD70150M8 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD70150M8) | category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Battery cable adapter black 70mm² 150cm M8-M8, KABZW70150M8 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW70150M8) | category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Crimp cable lug 70mm² > M8, PSKABOG00071 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=PSKABOG00071) | category Crimp cable lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/) * Insulation cap 35/50/70mm² double red, ISKP600N4 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP600N4) | category Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Insulation cap 35/50/70mm² double black, ISKP600N41 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP600N41) | category Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Red heat shrink tubing 50cm for 35/50/70mm battery cable, KRKR01191955 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKR01191955) | category Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * Black heat shrink tubing 50cm for 35/50/70mm battery cable, KRKZ01191955 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKZ01191955) | category Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * Mega fuse holder M8 35-300A, ZEKHD0000800 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ZEKHD0000800) | category Fuse holders (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/) * LittelFuse fuse 200A MEGA 70V-SF51, ZEKLFM070200 – to the item (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ZEKLFM070200) | category Fuses (https://shop.top.systems/beveiligen-schakelen/zekeringen/) * Victron SmartShunt 500A/50mV, SHU050150050 – to the article (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=SHU050150050) | category Battery monitors (https://shop.top.systems/monitoring-controle/accumonitors/) * Victron Cerbo GX MK2, BPP900450110 – to the article (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BPP900450110) * Cerbo GX Touch 50, BPP900455050 – to the article (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BPP900455050) * Victron Ekrano GX, BPP900480100 – to the article (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BPP900480100) Related products * MultiPlus-II 48/5000/70-50 230V, PMP482505012 – go to the article (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/multiplus-ii-48-5000-70-50-230v.html) * MultiPlus-II 48/5000/70-50-GX, PMP482506000 – go to the article (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/multiplus-ii-48-5000-70-50-gx.html) Documentation * Datasheet Multi RS 48/6000/100 inverter/battery charger (NL) (https://www.victronenergy.nl/upload/documents/Datasheet-Multi-RS-NL.pdf) * Manual Multi RS 230V (NL) (https://www.victronenergy.com/upload/documents/Multi_RS_230V/209435-Multi_RS-pdf-nl.pdf) * ISO 9001 certificate (NL) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-NL.pdf) Contact Unsure about the fuse size, cable cross-section, or combination with a separate MPPT charge controller? Our product specialists will calculate your installation and supply from stock. Contact us (https://www.top.systems/nl/contact/). Specifications Nominal battery voltage 48 V Continuous output power at 25 °C 4600 W at 46 V DC increasing to 5200 W at 52 V DC Continuous output power at 40 °C 4500 W Continuous output power at 65 °C 3000 W Peak power 9 kW for 3 seconds, 7 kW for 4 minutes Maximum charging current from AC 88 A at 57.6 V DC Automatic transfer switch 50 A Maximum AC input and through-flow current 50 A Input voltage range DC 38 – 62 V, minimum start-up voltage 41 V Output voltage 230 V AC ± 2 %, 50 Hz ± 0.1 % Maximum continuous inverter current 25 A AC Efficiency 96.5 % at 1 kW, 94 % at 5 kW No-load power 20 W AC input voltage range 187 – 265 V AC, 45 – 65 Hz Charging voltage absorption / Trickle charging 57.6 / 55.2 V, adjustable Programmable charging voltage range 36 – 60 V Empty battery shutdown / restart 37.2 V / 43.6 V, adjustable Short-circuit output current 45 A Overcurrent protection AC output 30 A Auxiliary output AC-out-2 Yes Battery temperature sensor Included Battery voltage sensor Yes Data communication ports VE.Direct, VE.Can and Bluetooth Programmable input/output ports Yes, 2x Programmable relay Yes, 4 A up to 35 V DC and 1 A up to 70 V DC Remote on/off Yes 3-phase operation Yes, one unit per phase; Parallel connection not supported Operating temperature -40 to +65 °C, fan-assisted cooling Maximum humidity 95 %, non-condensing Maximum altitude 2000 m Earthing system TN and TT only Housing material Steel Protection degree IP21, protection class I Battery connection M8 bolts 230 V AC connection Screw terminals 10 mm² Dimensions (hxwxd) 462 x 425 x 127 mm Weight 11.2 kg Safety standards EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2, IEC 62040, IEC 62477 We would be happy to provide you with more information about this product. Please contact us
contact join us.
