MultiPlus 24/2000/50-32

MultiPlus 24/2000/50-32

MultiPlus 24/2000/50-32 Applications For yachts, motorhomes, commercial vehicles, and 24V off-grid installations requiring 230V without shore or generator power. Delivers 1600W continuous and 3500W peak, charges the battery bank at 50A, and takes over the load within 20 milliseconds. Pure sine wave inverter with UPS function. If the grid, shore power, or generator fails, the inverter switches on automatically and takes over the connected load. This happens within 20 milliseconds, allowing computers and other electronics to continue operating uninterrupted. * 2000VA / 1600W continuous at 25°C, 1400W at 40°C, 1000W at 65°C * 3500W peak power for loads with high inrush current * 230V AC ±2%, 50Hz ±0.1%, adjustable to 60Hz * Protected against short circuit, overload, and overheating Adaptive 4-stage battery charger The main output charges the battery bank with a maximum of 50A via adaptive charging software: bulk, absorption, and float, supplemented by a fourth stage for long-term maintenance charging. A second battery is charged via the separate 1A trickle charge output. * Absorption 28.8V, float 27.6V, storage mode 26.4V * Connection for battery temperature sensor * AC input range 187 – 265V AC, 45 – 65Hz PowerControl Use a control panel to set the maximum generator or shore power. The charging current is automatically reduced as soon as other consumers draw on the available power, so that the connection does not become overloaded. PowerAssist In the event of short-term peak load, power from the battery bank immediately supplements the insufficient shore or generator power. As soon as the load drops, the surplus is used again to charge the battery bank. Parallel and 3-phase Multiple units can be connected in parallel for more power. Three identical units can be configured as a 3-phase system; a 3-phase delta configuration is not supported. Low no-load consumption with search mode In search mode, self-consumption at no-load drops from 11W to 4W. The inverter switches on briefly and remains on only as long as the output current stays above the set level. Programmable relay Set by default as an alarm relay for alarm or pre-alarm, for example in the event of excessive temperature, excessive ripple voltage at the input, or excessively low battery voltage. Can also be configured for DC undervoltage or generator start/stop. Switching capacity 230V/4A AC, 4A up to 35V DC and 1A up to 60V DC. Configuration The unit works straight out of the box with the default settings. Charging voltage and search mode can be changed using DIP switches. For all other settings, use VE.Configure via the MK3-USB interface, or VictronConnect in combination with the VE.Bus Smart dongle. Remote monitoring and control In combination with a GX communication center, you can monitor and operate the system locally via LAN or remotely via the internet, using the free app and the VRM Portal – Victron Energy (https://vrm.victronenergy.com/landingpage). Access from smartphone, tablet, laptop or PC. Connections and installation * Battery connection via M8 bolts * 230V AC connection via screw terminals up to 13 mm² * Housing steel/ABS, protection class IP21 * Operating temperature -40 to +65°C, fan-cooled Available to order directly * Victron interface MK3-USB (VE.Bus to USB) – ASS030140000-C – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ASS030140000-C) * Victron VE.Bus Smart dongle – ASS030537010 – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ASS030537010) * Victron Digital Multi Control 200/200A GX (90º) – DMC000200010R – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=DMC000200010R) * Victron Cerbo GX MK2 – BPP900450110 – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BPP900450110) * Cerbo GX Touch 50 – BPP900455050 – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BPP900455050) * Victron SmartShunt 500A/50mV – SHU050150050 – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=SHU050150050) * Victron Battery Monitor BMV-712 Smart – BAM030712000R – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BAM030712000R) * Cable set 35mm² 1.5 m red and black M8 – KABSET010350 – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABSET010350) * Cable set 35mm² 1.5 m red and black M8-M8 – KABSET010351 – view product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABSET010351) Related products * MultiPlus 24/1600/40-16 Compact – CMP242160000 – view product (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/multiplus-24-1600-40-16-compact.html) * MultiPlus 24/3000/70-50 – PMP243021011 – view product (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/multiplus-24-3000-70-50.html) * Quattro 24/3000/70-50/50 – QUA243020010 – view product (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/quattro-24-3000-70-50-50.html) * EasySolar-II 24/3000/70-32 MPPT 250/70 GX – PMP242307010 – view product (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/easysolar-ii-24-3000-70-32-mppt-250-70-gx.html) Documentation * Datasheet MultiPlus 500VA – 2000VA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-500VA-2000VA-EN.pdf) * Manual MultiPlus 2kVA 230V, HTML5 (EN) (https://www.victronenergy.com/media/pg/MultiPlus_2kVA_230V/en/index-en.html) * MultiPlus 2kVA 230V Manual, PDF (EN) (https://www.victronenergy.com/upload/documents/MultiPlus_2kVA_230V/24547-MultiPlus_2kVA-pdf-en.pdf) * MultiPlus 12V 24V 48V 2000VA Dimensions (EN) (https://www.victronenergy.com/upload/documents/MultiPlus-12V-24V-48V-2000VA-120V-230V.pdf) * MultiPlus 500VA – 2000VA CE Declaration (EN) (https://www.victronenergy.com/upload/documents/MultiPlus-500VA-2000VA-2022-07-04.pdf) * ISO 9001 certificate Victron Energy (EN) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Contact Unsure about the battery cable cross-section, fuse selection, or integration into an existing VE.Bus system? Our product specialists would be happy to calculate your installation with you and help you consider expansion with a GX communication center or additional units. Contact us (https://www.top.systems/nl/contact/). Specifications Continuous output power at 25°C 2000VA / 1600W Continuous output power at 40°C 1400W Continuous output power at 65°C 1000W Peak power 3500W Battery voltage 24V Battery bank charging current 50A Starter battery charging current 1A Transfer switch 32A PowerControl / PowerAssist Yes Inverter input voltage range 19 – 33V DC Output voltage 230V AC ±2% Output frequency 50Hz ±0.1%, adjustable to 60Hz Maximum efficiency 94% No-load power 11W No-load power in search mode 4W AC input voltage range 187 – 265V AC AC input frequency 45 – 65Hz Absorption voltage 28.8V Float voltage 27.6V Storage mode 26.4V Battery temperature sensor Yes Programmable relay Yes, 230V/4A AC; 4A up to 35V DC; 1A up to 60V DC Battery connection M8 bolts 230V We would be happy to provide you with more information about this product. Please contact us contact join us.