MultiPlus 48/1200/13-16

MultiPlus 48/1200/13-16

MultiPlus 48/1200/13-16 Applications For compact 48V installations where inversion, charging, and pass-through must fit into a single device: smaller off-grid and emergency power systems, mobile units, and onboard networks. The successor to the earlier Compact series, with full PowerAssist functionality. Sine wave inverter, battery charger, and automatic transfer switch Pure sine wave inverter, advanced battery charger with adaptive charging technology, and a fast AC transfer switch in a single elongated housing. The high starting power handles inrush currents from, for example, LED drivers, halogen lighting, and power tools. Proven reliability The full-bridge plus toroidal transformer topology has proven itself for years in professional installations. The inverter is short-circuit resistant and protected against overheating due to overload or high ambient temperature. Uninterrupted AC power In the event of a grid failure or loss of shore or generator power, the inverter takes over the connected loads within 20 milliseconds, ensuring that computers and other electronics continue to operate. PowerControl and PowerAssist A maximum shore or generator current is set using the control panel. The MultiPlus charges only with the power remaining after the other AC loads. PowerAssist supplements short-term peaks with power from the battery bank and recharges it as soon as the load decreases. Parallel and three-phase Up to six units in parallel for higher output power; three identical units can be configured for three-phase output. An RJ45 splitter (ASS030065510) is required for the VE.Bus connection between the units at this power level. Adaptive battery charger Four-step adaptive charging characteristic with absorption 57.6 V, trickle 55.2 V, and storage mode 52.8 V. The battery charging current is 13 A up to an ambient temperature of 25 °C. The battery temperature sensor is included; the 10mm² battery cables are not. The unit has an internal 50 A DC fuse. Search mode With search mode enabled, no-load consumption drops by approximately 70%. The inverter switches off at no or very low load and briefly switches on every two seconds; if the output current exceeds the set level, it continues to run. Configuration and monitoring Remote on/off, battery recharge voltage, inverter frequency, and search mode can be set using DIP switches; VEConfigure or the VE.Bus Smart dongle is used for the remaining settings. In combination with a GX device, the system can be monitored and operated locally and remotely via the VRM Portal – Victron Energy (https://vrm.victronenergy.com/landingpage) and the VRM app. The programmable relay switches by default upon alarm or pre-alarm, such as near-high temperature, excessive input ripple, or near-low battery voltage. Can be ordered directly with this item * Cable set 10mm² 1.5 m red and black M8 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABSET010100) – item number KABSET010100, category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Battery cable red 10mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD0101000) – item number KABRD0101000, category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Battery cable black 10mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW0101000) – item number KABZW0101000, category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Crimp lug 10mm² > M8 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=PSKABOG00011) – item number PSKABOG00011, category Crimp lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/) * Red insulation cap 16mm² (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP218N4V02) – article number ISKP218N4V02, category Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Insulation cap black 16mm² (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP218N4V14) – article number ISKP218N4V14, category Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Heat shrink tubing red 50 cm for 10mm battery cable (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKR00019548) – article number KRKR00019548, category Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * Black heat shrink tubing 50 cm for 10mm battery cable (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKZ00019548) – item number KRKZ00019548, category Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * 50A MIDI fuse (58V) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ZEK001004050) – item number ZEK001004050, category Fuses (https://shop.top.systems/beveiligen-schakelen/zekeringen/) * Victron fuse holder for MIDI fuse (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=CIP000050001) – article number CIP000050001, category Fuse holders (https://shop.top.systems/beveiligen- Schakelen/fusehouders/) * Victron Digital Multi Control 200/200A (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=REC020005010) – article number REC020005010, category Control panels (https://shop.top.systems/monitoring-control/controlpanels/) * Victron Digital Multi Control 200/200A GX (90º) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=DMC000200010R) – item number DMC000200010R, category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/) * Victron Battery Monitor BMV-712 Smart (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BAM030712000R) – item number BAM030712000R, category Battery monitors (https://shop.top.systems/monitoring-controle/accumonitors/) * Victron Battery Monitor BMV-712 Smart black (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BAM030712200R) – item number BAM030712200R, category Battery monitors (https://shop.top.systems/monitoring-controle/accumonitors/) * Victron battery monitor BMV-700 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BAM010700000R) – item number BAM010700000R, category Battery monitors (https://shop.top.systems/monitoring-controle/accumonitors/) * Victron VE.Bus Smart dongle (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ASS030537010) – item number ASS030537010 * Victron Cerbo GX MK2 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BPP900450110) – item number BPP900450110 * TS Enovations Insulation Monitor IMD3 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=SHP302501450-C) – item number SHP302501450-C, category Insulation Monitors (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/) Related products * MultiPlus 48/1600/20-16 (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/multiplus-48-1600-20-16.html) – item number PMP482160000, the heavier version from the same IP21 series * MultiPlus 48/800/9-16 (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/multiplus-48-800-9-16.html) – item number PMP481800000, the lighter version from the same IP21 series Documentation * Datasheet MultiPlus inverter/charger 500 VA – 2000 VA (NL) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-500VA-2000VA-NL.pdf) * Datasheet MultiPlus Inverter/Charger 500VA – 2000VA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-500VA-2000VA-EN.pdf) * MultiPlus 500VA – 1200VA Manual (multilingual, with NL) (https://www.victronenergy.com/upload/documents/Manual-MultiPlus-500VA-1200VA-EN-NL-FR-DE-ES-IT.pdf) * MultiPlus 12V 24V 48V 1200VA Dimensions (EN) (https://www.victronenergy.com/upload/documents/MultiPlus-12V-24V-48V-1200VA.PDF) * MultiPlus 500 VA – 2000 VA Declaration of Conformity (EN) (https://www.victronenergy.com/upload/documents/MultiPlus-500VA-2000VA-2022-07-04.pdf) * ISO 9001 certificate Victron Energy (NL) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-NL.pdf) Videos * Did You Know – updating MultiPlus firmware with an Android smartphone (EN) (https://youtu.be/AEPmjkyg7UY) Contact Curious whether 1200 VA is sufficient for your loads, or how this device works with your battery bank and solar chargers? Our specialists are happy to help. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Continuous output power at 25 °C 1200 VA / 1000 W Continuous output power at 40 °C 900 W Continuous output power at 65 °C 600 W Peak power 2400 W Battery charging current 13 A Automatic transfer switch 16 A DC input voltage range 38 – 66 V Output voltage 230 VAC ± 2 %, 50 Hz ± 0.1 % AC input voltage range 187 – 265 VAC, 45 – 65 Hz Acceptance charging voltage 57.6 V Trickle charging voltage 55.2 V Storage mode 52.8 V No-load power 10 W No-load power search mode 3 W Internal DC fuse 50 A Number of AC outputs 1 Battery temperature sensor included Programmable relay 230 V / 4 A AC, 4 A up to 35 VDC, 1 A up to 60 VDC Remote DIP on/off switches battery recharge voltage, frequency, search mode Communication VE.Bus (RJ45 splitter ASS030065510 required) Operating temperature -40 to +65 °C, fan cooling Humidity max. 95 %, non-condensing Protection category IP21 Material steel/ABS Battery terminal 10 mm² 230 VAC terminal G-ST18i connector Dimensions (hxwxd) 406 x 250 x 100 mm Weight 8.2 kg EAN 8719076039334 Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 Road vehicles ECE R10-5 Warranty 5 years We would be happy to provide you with more information about this product. Please contact contact join us.