Quattro 48/10000/140-100/100
Quattro 48/10000/140-100/100 Applications For heavy-duty onboard installations, off-grid homes, and commercial buildings with shore power or a generator. Two AC inputs of 100 A each, a takeover within 20 ms, and PowerAssist deliver 8 kW continuously on a limited grid connection. Two AC inputs with integrated takeover switch The Quattro accepts two independent AC sources, for example, the public grid and a generator, or shore power and a generator, and automatically selects the active source. The maximum transfer current is 2x 100 A. The AC input range is 187-250 VAC at 50/60 Hz. Two AC outputs * AC-out-1 is uninterruptible: in the event of a loss of grid, shore power, or generator, the inverter takes over the load within 20 ms. * AC-out-2 is only active as long as AC voltage is present on one of the inputs. Suitable for loads that must not discharge the battery bank, such as a water heater or air conditioning. PowerControl and PowerAssist A current limit can be set per AC input. The Quattro takes other AC loads into account and uses only the remaining current to charge, ensuring the generator or mains connection is not overloaded. PowerAssist supplements short-term peaks with power from the battery bank and recharges as the load decreases. Battery charger * Maximum charging current 140 A with adaptive charging characteristic. * Absorption 57.6 V, trickle charging 55.2 V, storage mode 52.8 V. * The battery temperature sensor is not included with the 48V version and can be ordered separately. * This model does not have a charging port for a starter battery; this is only present on the 12V and 24V versions. Energy Storage and Solar Energy This model is certified for grid-connected energy storage and suitable for off-grid and grid-connected PV installations, in conjunction with MPPT charge controllers and grid-connected inverters. With ESS functionality, self-consumption, backup, and charging during low electricity prices can be combined. Parallel, Three-Phase, and Split-Phase Up to 6 units can be connected in parallel for higher output power. Three units of the same type form a three-phase system. A split-phase output can be realized using an autotransformer in combination with an inverter programmed for 240 V / 60 Hz. Configuration, Monitoring, and Operation * Basic settings via DIP switches; parallel and three-phase systems via VE.Bus Quick Configure and VE.Bus System Configurator. * Off-grid, grid-connected, and self-consumption installations with Assistants. * Local data reading using a communication center such as the Cerbo GX or Ekrano GX, a battery monitor, a control panel, Bluetooth, laptop, or computer. * Remote reading and configuration via the VRM Portal – Victron Energy (https://vrm.victronenergy.com/landingpage). * Three programmable relays and two general-purpose ports, including for communication with the battery management system of a lithium battery bank. Housing and connections * Aluminium housing, RAL 5012, IP20, pollution degree 2, OVC III. * Operating temperature -20 to +60 °C, maximum altitude 2000 m. * Battery connection with four M8 bolts, two positive and two negative. * 230 VAC connection with M6 bolts. * Auxiliary output 50 A, switches off as soon as no external AC source is available. Can be ordered directly * Red battery cable 50mm² per meter (KABRD0105000) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD0105000) | category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Black battery cable 50mm² per meter (KABZW0105000) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW0105000) | category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Red battery cable 95mm² per meter (KABRD0109500) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD0109500) | category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Black battery cable 95mm² per meter (KABZW0109500) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW0109500) | category Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Crimp lug 50mm² > M8 (PSKABOG00051) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=PSKABOG00051) | category Crimp lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/) * Crimp lug 95mm² > M8 (PSKABOG00094) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=PSKABOG00094) | category Crimp lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/) * Red insulation cap 35 / 50mm² (ISKP222N4V02) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP222N4V02) | category Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Black insulation cap 35 / 50mm² (ISKP222N4V14) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP222N4V14) | category Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Red insulation cap 70/95mm² (ISKP232N4V02) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP232N4V02) | category Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Black insulation cap 70/95mm² (ISKP232N4V14) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP232N4V14) | category Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Red heat shrink tubing 50cm for 35/50/70mm battery cable (KRKR01191955) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKR01191955) | category Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * Black heat shrink tubing 50cm for 35/50/70mm battery cable (KRKZ01191955) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKZ01191955) | category Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * Red heat shrink tubing 50cm 70/95/120mm battery cable (KRKR01254127) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKR01254127) | category Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * Black heat shrink tubing 50cm 70/95/120mm battery cable (KRKZ01254127) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKZ01254127) | category Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * Victron Digital Multi Control 200/200A (REC020005010) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=REC020005010) | category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/) * Victron Digital Multi Control 200/200A GX (90º) (DMC000200010R) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=DMC000200010R) | category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/) * Victron Accumonitor BMV-700 (BAM010700000R) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BAM010700000R) | category Battery monitors (https://shop.top.systems/monitoring-controle/accumonitors/) * Victron Cerbo GX MK2 (BPP900450110) – product page (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=BPP900450110) Related products * Quattro 48/15000/200-100/100 (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/quattro-48-15000-200-100-100.html) (QUA483150000) * Quattro 48/8000/110-100/100 (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/quattro-48-8000-110-100-100.html) (QUA488024000) * MultiPlus-II 48/10000/140-100 (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/multiplus-ii-48-10000-140-100.html) (PMP483105000) Documentation * Datasheet Quattro 3kVA – 15kVA (NL) (https://www.victronenergy.nl/upload/documents/Datasheet-Quattro-3kVA-15kVA-NL.pdf) * Datasheet Quattro 3kVA – 15kVA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Quattro-3kVA-15kVA-EN-.pdf) * Datasheet ESS application Quattro 48V 8-10-15kVA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-ESS-application-Quattro-48V-8-10-15kVA-EN.pdf) * Manual Quattro 5k 8k 10k 15k 100-100A 230V (NL/EN) (https://www.victronenergy.com/upload/documents/Manual-Quattro-5k-8k-10k-15K-100-100A-230V-(firmware-xxxx4xx)-EN-NL-FR-DE-ES-SE-IT.pdf) * Dimensioning 48V 10000VA 230V (https://www.victronenergy.com/upload/documents/Quattro-24V8kVA230V-48V8kVA230V-48V10kVA230V-48V5kVA120V.pdf) * Dimensions 48V 10000VA 230V (3D) (https://www.victronenergy.com/upload/documents/Quattro-24V8kVA230V-48V8kVA230V-48V10kVA230V-48V5kVA120V-(3D).pdf) * Dimensions wall mounting plate 8000VA – 10000VA (https://www.victronenergy.com/upload/documents/Enclosure-dimensions_wall-mounting-plate-QUA-8-10kVA_HOU210009012.pdf) * Quattro(-II) Declaration of Conformity (https://www.victronenergy.com/upload/documents/Quattro(-II)-2023-12-08.pdf) * EN 50549-1 Certificate (https://www.victronenergy.com/upload/documents/Certificate-ESS-EN-50549-1-Quattro-8kVA,-10kVA,-15kVA.pdf) * IEC 62116 Certificate (https://www.victronenergy.com/upload/documents/Certificate-ESS-IEC-62116-Quattro-48-8000-110,-48-10000-140,-48-15000-200.pdf) * IEC 62040-1 Certificate (https://www.victronenergy.com/upload/documents/Certificate-IEC-62040-1-Quattro-48-8000-110,-48-10000-140,-48-15000-200.pdf) * EN/IEC 62109-1 and IEC 60335-2-29 Certificate (https://www.victronenergy.com/upload/documents/Certificate-Safety-EN-IEC-62109-1-&-IEC-60335-2-29-all-Multiplus-&-Quattros-incl.-15k.pdf) * Victron Energy ISO 9001 certificate (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Videos * VEConfigure basic (https://www.youtube.com/watch?v=V1Zceq02vMA) * How to set up BMV Battery Monitor for lead and lithium batteries (https://www.youtube.com/watch?v=mEN15Z_S4kE&feature=youtu.be) Contact At 10 kVA and 140 A charging current, battery capacity, fuse size, cable cross-section, and cooling are crucial. Our specialists will calculate the installation with you and supply from stock. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Nominal battery voltage 48 V DC input voltage range 38 – 60 V Continuous output power at 25 °C 10000 VA / 8000 W Continuous output power at 40 °C 6500 W Continuous output power at 65 °C 4500 W Peak power 20000 W Output voltage 230 VAC ± 2 %, 50 Hz ± 0.1 % (adjustable to 60 Hz) Maximum charging current 140 A Charging voltage absorption / float / storage 57.6 / 55.2 / 52.8 V Number of AC inputs 2 Maximum switching current 2x 100 A AC input range 187 – 250 VAC, 50/60 Hz Number of AC outputs 2 Auxiliary output AC-out-250 A Max. DC input current 235 A Max. continuous output current 37 A Max. Output fault current 100 A for 1 s Maximum efficiency 96 % No-load power 60 W No-load power AES / search mode 40 W / 15 W Programmable relays 3x Communication VE.Bus, 2x general purpose port, remote on/off Operating temperature -20 to +60 °C Humidity max. 95 %, non-condensing Maximum altitude 2000 m Housing Aluminium, RAL 5012 IP rating IP20, pollution degree 2, OVC III Battery connection Four M8 bolts (2 plus, 2 minus) 230 VAC connection M6 bolts Dimensions (hxwxd) 470 x 350 x 280 mm Weight 51 kg Warranty 5 years We would be happy to provide you with more information about this product. Please contact us
contact join us.
