Victron BlueSolar PWM 12/24V-30A LCD&USB

Victron BlueSolar PWM 12/24V-30A LCD&USB

Victron BlueSolar PWM 12/24V-30A LCD & USB Applications The most powerful LCD version: 30 A charging and load current with terminals up to 16 mm². For motorhomes, boats, garden sheds, and work units where multiple panels are connected in parallel to a single battery bank and you want to read and set the status on-site. LCD screen Built-in LCD for status monitoring and changing settings. You set the battery type, charging voltages, and the on- and off-circuit voltages of the load output on-site. Two USB outputs Two 5 V outputs, totaling a maximum of 2 A. Convenient for charging a smartphone or tablet without a separate adapter. PWM charge control * Three-stage charging: bulk, absorption, and trickle — programmable * Pre-programmed profiles for AGM, gel, lead-acid, and LiFePO4 with internal battery management system * Factory setting: absorption 14.4 V (12V) / 28.8 V (24V), trickle 13.7 V / 27.4 V * Self-consumption less than 10 mA Automatic voltage detection Automatically detects whether it is a 12V or 24V battery bank. Maximum solar voltage 28 V for 12V and 55 V for 24V. Use a 36-cell panel for 12V and a 72-cell panel or two 36-cell panels in series for 24V. Connect multiple panels in parallel. Load output * Nominal load current 30 A * Switch off at 11.2 V / 22.4 V, re-enable at 12.6 V / 25.2 V * On and off voltages adjustable * Day/night timing: the on-time after sunset is adjustable Connection tip for inverters Connect an inverter directly to the battery bank and use the load output for remote control of the inverter. Consult the manual for the required interface cable. Protections * Reverse polarity of battery and solar panel * Short circuit: immediate shutdown * Overload: off after 60 seconds at 130%, after 5 seconds at 160% * Over-temperature and low-voltage shutdown Mounting and connection Terminals up to 16 mm² (AWG6). Protection class IP20, therefore exclusively for dry indoor mounting. Operating temperature -35 to +60 °C at full load. Can be ordered directly with this * Cable set 10mm² 1.5 m red and black M8 — KABSET010100 — product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=KABSET010100) Related products * Victron BlueSolar PWM 12/24V-10A LCD&USB — SCC010010050 — view product (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-bluesolar-pwm-12-24v-10a-lcd-usb.html) * Victron BlueSolar PWM 12/24V-20A LCD&USB — SCC010020050 — view product (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-bluesolar-pwm-12-24v-20a-lcd-usb.html) * Victron BlueSolar PWM DUO-LCD&USB 12/24V-20A — SCC010020060 — view product (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-bluesolar-pwm-duo-lcd-usb-12-24v-20a.html) * Victron BlueSolar PWM-Light 12/24V-30A — SCC010030020 — view product (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-bluesolar-pwm-light-12-24v-30a.html) Documentation * BlueSolar PWM Datasheet LCD&USB 12/24V (NL) (https://www.victronenergy.com/upload/documents/Datasheet-BlueSolar-Charge-Controllers-12-24V-LCD&USB-NL.pdf) * Datasheet BlueSolar PWM LCD&USB 12/24V (EN) (https://www.victronenergy.com/upload/documents/Datasheet-BlueSolar-Charge-Controllers-12-24V-LCD&USB-EN.pdf) * Manual BlueSolar PWM LCD&USB 12/24V 30A and 48V (NL/EN) (https://www.victronenergy.com/upload/documents/Manual-BlueSolar-PWM-Charge-Controller-LCD&USB-12V-24V-30A-&-48V-10A-20A-30A-EN-NL-FR-DE-ES-SE-IT.pdf) * Dimensions BlueSolar PWM (DUO) LCD&USB 12/24V 30A and 48V (https://www.victronenergy.com/upload/documents/BlueSolar-PWM-(DUO)-LCD&USB-12V24V-30A-48V-10A-20A-30A.pdf) * EU Declaration of Conformity BlueSolar PWM LCD&USB (https://www.victronenergy.com/upload/documents/BlueSolar-PWM-LCD&USB-Charge-Controllers-2021-12-29.pdf) * ISO 9001 certificate (NL) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-NL.pdf) * ISO 9001 certificate (EN) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Contact We will determine the right panel for your battery voltage and the appropriate battery profile with you, and supply the cable, connectors, and protection all at once. Contact us (https://www.top.systems/nl/contact/). Specifications Specification Value Charge controller type PWM Battery voltage 12 / 24 V, automatic detection Nominal charging current 30 A Nominal load current 30 A Maximum solar voltage 28 V (12V) / 55 V (24V) Charging characteristic Three-step, programmable Battery types AGM, gel, wet lead, LiFePO4 with internal battery management system Absorption voltage 14.4 V / 28.8 V (factory setting) Trickle voltage 13.7 V / 27.4 V (factory setting) Low voltage shutdown 11.2 V / 22.4 V Load restart 12.6 V / 25.2 V USB outputs 2x 5 V, total maximum 2 A Display LCD Own consumption < 10 mA Protections Reverse polarity battery and PV, short circuit, overload, overtemperature, low voltage shutdown Terminals 16 mm² (AWG6) Operating temperature -35 to +60 °C at full load Humidity Max. 95%, non-condensing Protection class IP20 Dimensions (hxwxd) 101 x 184 x 47 mm Weight 0.3 kg Safety EN 60335-1, IEC 62109-1 EMCEN 61000-6-1, EN 61000-6-3 EAN 8719076046226 We would be happy to provide you with more information about this product. Please contact us contact join us.