Victron Cerbo GX Touch 70 flush

Victron Cerbo GX Touch 70 flush

Victron Cerbo GX Touch 70 Flush The GX Touch 70 Flush is the flush-mountable version of the 7-inch touchscreen display for the Cerbo GX and Cerbo GX MK2. The screen displays the Remote Console of the GX device, providing full local control: system overview, live measurements, and all settings, without a phone, laptop, or internet connection. The display is connected to the GX device with a single cable and mounted flush with the panel, with an IP65 protection rating. Applications Where the standard version is screwed onto the top of the panel, this version disappears into the surface: sleek, flat, and without a raised edge. At seven inches, the overview remains comfortably readable even with larger systems. Three mounting methods offer freedom, even when the back of the panel is inaccessible. * Marine: helm station, glass bridge, and panelled cabin panels * Motorhome and commercial vehicle: dashboard and wall panels * ESS, home battery, and off-grid: sleekly finished control panels * Humid environments where IP65 is required on the front Three mounting methods * With rubber seal and brackets – using the supplied seal, brackets, threaded rods, and wing nuts. This method provides the best dust and water resistance, and the screen remains removable. Requires access to the rear and a flat, clean mounting surface. Tighten threaded rods and wing nuts only by hand. * With adhesive layer – directly onto the mounting surface using the pre-applied adhesive layer, without brackets. Suitable when the rear is inaccessible; the achieved seal depends on the quality and flatness of the substrate. * Fully recessed – executed according to the dimensions of the drilling template, where the frame is recessed into the panel and the screen surface is flush with the surrounding finish. Can be combined with the rubber seal or the adhesive layer. Full operation via the screen The Remote Console of the connected GX device appears on the display. Battery status, consumption, PV, generator, and grid power, tank levels, and temperatures are visible at a glance. Settings for the GX device and for components connected via VE.Direct and VE.Bus can be adjusted directly on the screen. Configuration is not required: the system overview appears automatically after connection. Connection The display is connected using a single combined cable: an HDMI connector for the video signal and a USB connector for power. On the first-generation Cerbo GX, the USB end must be inserted into the port next to the HDMI connection; on the Cerbo GX MK2, this can be done on any of the three USB ports. Always connect the display before switching on the GX device. Touch control can be disabled The touch function can be disabled via a push button on a digital input of the GX device, or with the Pause/Break key of a connected USB keyboard. Operation via the Remote Console remains possible in this case. Documentation * Cerbo GX Manual including GX Touch (NL, HTML5) (https://www.victronenergy.com/media/pg/Cerbo_GX/nl/index-nl.html) * Cerbo GX Manual including GX Touch (EN, HTML5) (https://www.victronenergy.com/media/pg/Cerbo_GX/en/index-en.html) * Cerbo GX Manual (EN, PDF) (https://www.victronenergy.com/upload/documents/Cerbo_GX/140558-Ekrano_GX__Venus_GX__Cerbo_GX__Cerbo-S_GX_Manual-pdf-en.pdf) * Cerbo GX & GX Touch Datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-Cerbo-GX-GX-Touch-EN.pdf) * Dimensional Drawing (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-BPP900455170-GX-Touch-70-Flush.pdf) * Drilling Jig (PDF) (https://www.victronenergy.com/upload/documents/DrillingJig-BPP900455170-GX-Touch-70-Flush.pdf) * 3D Dimensioning (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-BPP900455170-GX-Touch-70-Flush-3D.pdf) * 3D Model (STEP) (https://www.victronenergy.com/upload/documents/DimensionDrawing-BPP900455170-GX-Touch-70-Flush-3D.STEP) * EU Declaration of Conformity – GX devices (PDF) (https://www.victronenergy.com/upload/documents/GX-devices-Cerbo-Ekrano-Color-Control-Venus-Octo-EU-DOC-RED.pdf) * Victron Energy ISO 9001 certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) * Victron GX product range – Venus OS documentation (EN) (https://www.victronenergy.com/live/venus-os:start) Victron Energy does not publish a separate manual for this display; installation and operation are described in the Cerbo GX manual, which is available in Dutch. The datasheet and certificates are in English only. Videos * Unboxing the new Cerbo GX & GX Touch 50 screen (Victron Energy, EN) (https://youtu.be/3wheKaU2_qw) * Did You Know – Changing the logo on a GX device (Victron Energy, EN) (https://youtu.be/8pR9utgkjSI) Contact Are you unsure whether to choose the flush-mount and surface-mount versions, or would you like to know which mounting method suits your panel and finish? Our specialists are happy to help. Please contact us (https://www.top.systems/nl/contact/). Specifications Type: Touchscreen display, 7 inch, flush-mountable Suitable for: Cerbo GX and Cerbo GX MK2 Display resolution: 1024 x 600 pixels Dimensions (hxwxd): 120 x 184 x 13 mm Protection class: IP65 Connection: HDMI (video) and USB (power), combined cable Cable length: 2 meters Mounting: Rubber seal with brackets, adhesive, or fully recessed Included: Connection cable, rubber seal, brackets, threaded studs, and wing nuts; adhesive pre-assembled Manufacturer: Victron Energy Warranty: 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.