Victron solar panel 95Wp Mono

Victron solar panel 95Wp Mono

Victron Solar Panel 95Wp Mono Applications For 12V installations on a boat, camper, or in a garden shed where more is needed than maintenance charging: refrigerator, lighting, and electronics on the service battery bank. The panel is pre-wired, so it can be connected directly without mounting connectors. Pre-wired with MC4 Unlike the smaller panels, this model comes with 900 mm cable and MC4 connectors (PV-ST01). This saves crimping and on-site installation, and provides a watertight, standardized connection to the solar cable or charge controller. Suitable for 12V With a Vmpp of 17.6V and 30 cells, this panel connects to a 12V battery bank. For a single panel, a PWM charge controller suffices; for two or more panels in series, or when you want maximum yield at low light levels, an MPPT charge controller is the better choice. Low-light output The monocrystalline cells have high sensitivity across the entire solar spectrum, ensuring the panel continues to deliver output even in cloudy and diffuse light. The low voltage-to-temperature coefficient of -0.45 %/°C at the MPP point limits losses at high cell temperatures. Construction * 30 monocrystalline cells * Anodized aluminum frame, suitable for standard mounting systems * High-transmission tempered glass for rigidity and impact resistance * EVA encapsulation with three-layer backing * Sealed, waterproof junction box type PV-LH0801 * Bypass diodes limit power loss in partial shading Load capacity * Maximum surface load capacity 200 kg/m² * Permissible hail load 23 m/s, 7.53 g * Temperature range -40 °C to +85 °C * Maximum system voltage 1000 V Warranty Victron Energy provides a 5-year warranty on materials and workmanship. In addition, a performance guarantee applies: at least 90% of the nominal power after 10 years and at least 80% after 25 years. Documentation * Datasheet BlueSolar Monocrystalline Panels – latest models (Victron Energy, English) (https://www.victronenergy.com/upload/documents/Datasheet-BlueSolar-Monocrystalline-Panels-latest-models-EN.pdf) Contact Would you like to know which charge controller and cable cross-section are suitable for this panel, or how many Wp you need for your consumption? Our specialists would be happy to calculate it for you. Please contact us (https://www.top.systems/nl/contact/). Specifications Nominal power (Pmpp) 95 W (±3%) Max-Power voltage (Vmpp) 17.6 V Max-Power current (Impp) 5.42 A Open-circuit voltage (Voc) 20.4 V Short-circuit current (Isc) 5.7 A Cell type Monocrystalline Number of cells 30 Dimensions (LxWxD) 770 x 668 x 30 mm Net weight 5.4 kg Cable / connector 900 mm, MC4 (PV-ST01) Maximum system voltage 1000 V Temperature coefficient MPP -0.45 %/°C Temperature coefficient Voc -0.35 %/°C Temperature coefficient Isc +0.04 %/°C Temperature range -40 °C to +85 °C Surface load capacity 200 kg/m² Buckle load We would be happy to provide you with more information about this product. Please contact us contact join us.