4-point distribution strip compact black

4-point distribution strip compact black

4-point distribution strip compact black

Compact 4-Point Distribution Strip, Black This compact four-point busbar distributes the negative terminal of a battery or battery bank to multiple consumers. The rail features one M6 end and three M10 ends and handles up to 210 A at 12 volts, with a maximum system voltage of 48 volts. Despite the smaller footprint compared to the heavy-duty version, the rail remains widely applicable. Applications A good ground point is half of a reliable DC installation — and this is precisely where improvisation often occurs. This strip gives each return line its own end, handles 210 A, and fits within a footprint that fits in almost any battery cabinet. The black finish immediately marks that this is the negative side. * Motorhomes, commercial vehicles, and work equipment * Yachts and sloops with a 12 V or 24 V on-board electrical system * Tight battery cabinets where a large rail does not fit * Central ground point in an off-grid or mobile installation Connection points * 3x M10 — for battery cables, inverters, and heavy consumers * 1x M6 — for a lighter circuit or a metering connection The connecting bolts are made of stainless steel, making the rail suitable for damp environments and engine compartments. Material and construction The base is made of glass-filled nylon with 16% glass fiber: impact-resistant, vibration-resistant, and electrically insulating. The mounting holes have a diameter of 5.08 mm and are spaced 118.47 mm apart, allowing the rail to be secured to a solid surface with two screws. Selection guide If you require more connection points for lighter circuits, the version with two M6 and ten M4 threaded ends is more suitable. If the current exceeds 210 A or you work with a system voltage higher than 48 volts, please consider the Victron busbars or the Lynx distribution system. Documentation No documentation from an external manufacturer is available for this item. Product information and any installation sheets can be found on our own product page. Contact Not sure if 210 A is sufficient for your installation, or what cable cross-section corresponds to it? Our specialists would be happy to calculate it for you. Please contact us (https://www.top.systems/nl/contact/). Specifications Maximum current 210 A at 12 V Maximum voltage 48 V Connections 1x M6 and 3x M10 Connection bolt material Stainless steel Base material Glass-filled nylon, 16% glass fiber Mounting hole diameter 5.08 mm Center-to-center mounting holes 118.47 mm Width 133 mm Height 27 mm Depth 29 mm

We'd be happy to provide you with more information about this product. Please contact us.