4 point distribution strip compact red

4 point distribution strip compact red

4 point distribution strip compact red

Compact 4-Point Distribution Strip, Red This compact four-point busbar distributes the positive terminal of a battery or battery bank to multiple consumers. The busbar features one M6 end and three M10 ends and handles up to 210 A at 12 volts, with a maximum system voltage of 48 volts. Despite the smaller footprint compared to the heavy-duty version, the busbar remains widely applicable. Applications Not every installation has space for a full-fledged busbar distribution system — but it does require a decent distribution point. This strip delivers 210 A on a footprint that fits in virtually any battery cabinet, with M10 ends capable of handling heavy crimp terminals. The red version immediately indicates that this is the positive side. * Motorhomes, commercial vehicles, and work equipment * Yachts and sloops with a 12 V or 24 V on-board electrical system * Tight battery cabinets where a large rail does not fit * Off-grid installations with a limited number of heavy consumers Connection points * 3x M10 — for battery cables, inverters, and heavy consumers * 1x M6 — for a lighter circuit or a metering connection The connecting bolts are made of stainless steel, making the rail suitable for damp environments and engine compartments. Material and construction The base is made of glass-filled nylon with 16% glass fiber: impact-resistant, vibration-resistant, and electrically insulating. The mounting holes have a diameter of 5.08 mm and are spaced 118.47 mm apart, allowing the rail to be secured to a solid surface with two screws. Selection guide If you require more connection points for lighter circuits, the version with two M6 and ten M4 threaded ends is more suitable. If the current exceeds 210 A or you work with a system voltage higher than 48 volts, please consider the Victron busbars or the Lynx distribution system. Documentation No documentation from an external manufacturer is available for this item. Product information and any installation sheets can be found on our own product page. Contact Not sure if 210 A is sufficient for your installation, or what cable cross-section corresponds to it? Our specialists would be happy to calculate it for you. Please contact us (https://www.top.systems/nl/contact/). Specifications Maximum current 210 A at 12 V Maximum voltage 48 V Connections 1x M6 and 3x M10 Connection bolt material Stainless steel Base material Glass-filled nylon, 16% glass fiber Mounting hole diameter 5.08 mm Center-to-center mounting holes 118.47 mm Width 133 mm Height 27 mm Depth 29 mm

We'd be happy to provide you with more information about this product. Please contact us.