5xM10 Busbar (60V/600A)

5xM10 Busbar (60V/600A)

5xM10 Busbar (60V/600A)

DC Modular 5x M10 Busbar The DC Modular high-current busbars distribute high DC currents across multiple connected cables or other modules from the same series. This version features five M10 terminal bolts on a high-purity tinned copper base plate, is suitable for 600 A at a maximum of 60 V, and comes with a transparent cover. Applications Five heavy-duty connection points on a single busbar are exactly enough for most complete installations: battery bank, inverter/charger, charge controller, thruster, and consumer group each get their own M10 bolt. Everything on one strip, under one cover, and later expandable to the next module with a connection plate. * Commercial shipping and larger yachts with an extensive DC main distribution * ESS and off-grid installations with multiple inverter/chargers * Electric propulsion and heavy construction equipment * Switch cabinets where many heavy cables converge at a single point Construction and materials * Base plate made of high-purity tinned copper for low contact resistance * Bolts, washers, and nuts made of stainless steel for optimal corrosion resistance * Fiber-reinforced plastic base, resistant to high temperatures and chemicals * Transparent cover with break-off sides for cable entry from any direction Grid setup and coupling All DC Modular products have grid-matched base dimensions and the same connection height. This allows you to connect multiple rails and terminals with connection plates into a single continuous distribution, without custom fitting and without separate connecting cables. This rail has a grid size of 1 x 3, making it the longest in the series. Smart terminal setup The terminal design allows two cable lugs to be mounted mirrored on the same bolt. The cover is locked at the top so that the connections remain accessible afterwards without removing the module. Tighten the thumbscrews on the cover only hand-tight. Assembly and torque Mount in this order: cable lugs, flat washer, spring washer, nut. Never place a washer between the busbar and cable lug, between two cable lugs on the same bolt, between the busbar and the terminal plate, or between the cable lug and the terminal plate. Torque 22 N·m for M10. Ensure sufficient strain relief on all cables. Wiring sequence The order is particularly important with five connection points. Follow the top-down method: place the heaviest load as close as possible to the main supply, preferably on the same bolt, and the lighter loads on the bolts located further away. This limits losses along the length of the busbar. Documentation * Product information DC Modular at TBS Electronics, with brochure (EN) (https://tbs-electronics.com/product/dcm-insulated-studs/) The installation manual for the DC Modular series is multilingual, including Dutch, and describes the specifications, assembly sequence, torque specifications, drilling template, and wiring sequence. See our own product page for that document; the manufacturer's brochure is in English. Contact Are you building a DC Modular distribution system and do you want the right combination of rails, terminals, and terminal blocks? Our specialists would be happy to put it together with you. Please contact us (https://www.top.systems/nl/contact/). Specifications Connection bolts 5x M10 Maximum current 600 A Maximum voltage 60 V Grid size 1 x 3 Dimensions (WxDxH) 50 x 150 x 64.5 mm Size A / Size B 38.0 / 138.0 mm Tightening torque 22 N·m Bus bar material Tinned copper, high purity Bolt and nut material Stainless steel Base material Fiber-reinforced plastic Cover cap Transparent, with break-off sides Placement Exclusively in a dry indoor environment

We'd be happy to provide you with more information about this product. Please contact us.