Navilock GNSS Receiver u-blox 8 4.5 m

Navilock GNSS Receiver u-blox 8 4.5 m

Navilock GNSS Receiver u-blox 8 4.5 m

Navilock GNSS Receiver u-blox 8 4.5 m Multi-GNSS receiver based on the u-blox 8 chipset, with built-in antenna and a fixed 4.5 m USB cable. Receives GPS, GLONASS, BeiDou, Galileo, and QZSS simultaneously and provides the position via NMEA 0183. The threaded through-mount allows for waterproof installation on a roof or deck; the housing is designed for lightweight surfaces. Applications Anyone wishing to monitor an installation remotely needs only one thing on the GX device side: a GNSS receiver that speaks NMEA 0183. It is recognized as soon as you plug it into a USB port — no configuration, no extra software. The position then appears on the VRM, and you can set up a geofence that triggers an alarm as soon as the installation leaves the area. * Tracking of boats, motorhomes, and professional vehicles via the VRM portal * Geofencing for signaling on rental and project equipment * Fixed roof feed-through on installations permanently located outdoors * Navigation on laptop or on-board computer with suitable software Reception * Chipset u-blox 8 (UBX-M8030-KT), up to 72 satellites simultaneously * GPS L1, GLONASS L1, BeiDou B1, Galileo E1, and QZSS L1 * SBAS: WAAS, EGNOS, QZSS, and MSAS; AssistNow online and offline * ​​Sensitivity down to -167 dBm * Accuracy 2.5 m CEP, with SBAS 2 m CEP * Cold start approximately 26 seconds, warm start approximately 1 second Connection to a GX device Victron does not supply USB-GPS itself, but according to the manufacturer's manual, GX devices support most GPS receivers that use the NMEA 0183 command set. Connecting to a free USB port is sufficient; the device is automatically recognized after a short time and the position is transmitted to VRM. Please note: with a Cerbo GX, the USB port next to the HDMI connection only supplies power and no data — use another port. This limitation does not apply to the Cerbo GX MK2. Design and mounting * Threaded pass-through mounting, stainless steel nut and washer included * Protection class IPX7 * Operating temperature -20 to +60 °C * Power supply 5 V DC via USB, maximum current consumption 45 mA Can be ordered directly * Victron Cerbo GX MK2 (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-cerbo-gx-mk2.html) (BPP900451100) — the GX device to which this receiver is connected. Category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/). Related products * Victron Active GPS Antenna (https://shop.top.systems/monitoring-controle/draadloos/victron-active-gps-antenne.html) (GSM900200100) — alternative when the GPS receiver is in the modem * Stigwize 2-in-1 Puck Antenna 4G GPS (https://shop.top.systems/monitoring-controle/draadloos/stigwize-2-in-1-puck-antenna-4g-gps.html) (ANT010200004) — 4G and GPS in a single pass-through Documentation Navilock publishes German and English documentation for this item; Dutch manufacturer documentation is not available. * Navilock product page NL-8022MU, art. 62532 (EN/DE) (https://www.navilock.com/produkt/62532/merkmale.html) * Navilock product sheet (EN, PDF) (https://www.navilock.com/produkt/62532/pdf.html?sprache=en) * Victron GX manual — connecting a USB GPS (EN) (https://www.victronenergy.com/media/pg/Venus_GX/en/connecting-supported-non-victron-products.html) * Manual via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Manuals/ANT010200005_antenne-GPS-uSB.pdf) * Datasheet via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Datasheets/ANT010200005_antenne-GPS-uSB.pdf) Contact Would you like to set up tracking and geofencing on VRM for your fleet or project equipment? Our specialists will help you with a working setup, from hardware to portal settings. Please contact us (https://www.top.systems/nl/contact/). Specifications Chipset Tu-blox 8, UBX-M8030-KT Satellite systems GPS L1, GLONASS L1, BeiDou B1, Galileo E1, QZSS L1 Channels Up to 72 satellites simultaneously Protocol NMEA 0183 (GGA, GSA, GSV, RMC, VTG) Baud rate Automatic, up to 115,200 bps SBAS WAAS, EGNOS, QZSS, MSAS Update frequency 18 Hz single GNSS; 10 Hz multi-GNSS Sensitivity Max. -167 dBm Accuracy 2.5 m CEP; 2 m CEP with SBAS Start-up time Cold approx. 26 s, warm approx. 1 s Connection USB 2.0 type A male, cable approx. 4.5 m Power supply 5 V DC, max. 45 mA Protection class IPX7 Operating temperature -20 to +60 °C Dimensions (Ø x h, without thread) approx. 62 x 21 mm Brand Navilock EAN 4043619625321

We'd be happy to provide you with more information about this product. Please contact us.