Victron SmartShunt 1000A/50mV IP65

Victron SmartShunt 1000A/50mV IP65

Victron SmartShunt 1000A/50mV IP65

Victron SmartShunt IP65 1000 A The SmartShunt IP65 is a complete battery monitor without a display: the phone is the screen. All electronics are encapsulated on the shunt itself, making the entire unit IP65 rated and eliminating the need for cabling to a panel. Via Bluetooth and the VictronConnect app, you can read charge status, voltage, current, consumed ampere-hours, and remaining runtime. This version is suitable for up to 1000 A. Applications As soon as there are multiple inverter/chargers or an electric drive in the system, a 500 A shunt reaches its limit. This version measures up to 1000 A with the same accuracy and the same app, and thanks to its encapsulated design, it can simply be mounted in a machine room or technical room. * Larger yachts and commercial vessels with a heavy DC main distribution * Off-grid installations with multiple inverter/chargers in parallel * Commercial vehicles with electric propulsion or heavy auxiliary systems * Installations where the monitor is located in a damp or dusty area What you read out * Battery voltage, current, and power * Consumed ampere-hours, charge status, and remaining runtime * History: deepest discharge, average discharge, number of cycles, highest and lowest voltage * Trends over the stored measurement period Auxiliary input The integrated auxiliary cable can be configured for one of three functions: voltage of a second battery (6.5 – 70 VDC), center point voltage of a battery bank, or temperature via the optional sensor ASS000100000. With center point monitoring, the monitor calculates the percentage deviation and triggers an alarm as soon as it exceeds a set limit. Connection and integration In addition to Bluetooth, there is a VE.Direct port for pairing with a GX device, after which the data is available locally and via the VRM portal. Via VE.Smart networking, the monitor wirelessly shares battery voltage and current with Victron charge controllers and some battery chargers. The device can also be configured as a DC meter for a separate DC circuit. Differences compared to a BMV-712 Smart * No visual or audible alarm on the device itself; alarms are received via the app or the GX device * No programmable relay * Waterproof design, IP65 * The electronics are fixed to the shunt instead of in a separate display unit Mounting The shunt is the only component that should be connected to the negative terminal of the battery; all consumers and chargers connect to the LOAD MINUS side. In this version, the connection bolts are M10 and the maximum tightening torque is 21 Nm. Take the larger housing into account when designing the control cabinet layout. Included are a 1.5 m fused power cable, a 1.5 m auxiliary cable, and a 1.5 m VE.Direct cable. Bluetooth range The shunt and the power cables affect the Bluetooth range; In practice, about 10 to 15 meters remains. If the monitor is in a metal cabinet or close to a steel hull, this may be insufficient. In that case, add a VE.Direct Bluetooth Smart dongle (ASS030536011) and disable Bluetooth in the SmartShunt. Documentation * SmartShunt IP65 Manual (EN, HTML5) (https://www.victronenergy.com/media/pg/SmartShunt_IP65/en/index-en.html) * SmartShunt IP65 Manual (EN, PDF) (https://www.victronenergy.com/upload/documents/SmartShunt_IP65/9172-Manual_BMV_and_SmartShunt-pdf-en.pdf) * SmartShunt IP65 Datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-SmartShunt-IP65-EN-.pdf) * VictronConnect app manual (EN, HTML5) (https://www.victronenergy.com/media/pg/VictronConnect_app/en/index-en.html) * Declaration of Conformity – BMV and SmartShunt battery monitors (PDF) (https://www.victronenergy.com/upload/documents/Battery-Monitor-BMV-&-SmartShunt-2024-08-27.pdf) * Victron Energy ISO 9001 certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Victron Energy publishes the manual in German, but not in Dutch; the datasheet and certificates are in English. Contact Are you unsure which amperage suits your installation, or are you hesitating between this IP65 version and the standard version? Our specialists would be happy to calculate it for you. Please contact us (https://www.top.systems/nl/contact/). Specifications Current 1000 A / 50 mV Supply voltage 6.5 – 70 VDC Self-consumption < 1 mA Auxiliary input Second battery (6.5 – 70 VDC), center point or temperature Temperature measurement range -20 to +50 °C Adjustable battery capacity 1 – 9999 Ah Communication Bluetooth and VE.Direct Current resolution ± 0.01 A Voltage resolution ± 0.01 V Ampere-hour resolution ± 0.1 Ah State of charge resolution ± 0.1 % Current measurement accuracy ± 0.4 % Offset Less than 20 mA Voltage measurement accuracy ± 0.3 % Dimensions (hxwxd) 68 x 168 x 75 mm Connection bolts M10, max. tightening torque 21 Nm Protection class IP65, encapsulated Operating temperature -40 to +50 °C Supplied cables Power cable 1.5 m with 1 A slow-blow Fuse, auxiliary cable 1.5 m with 1 A slow-blow fuse, VE.Direct cable 1.5 m Temperature sensor Optional, ASS000100000 Safety EN 60335-1, IEC 61010-1 EMCEN-IEC 61000-6-1 / -6-2 / -6-3 Automotive EN 50498 Warranty 5 years We would be happy to provide you with more information about this product. Please contact us.