DC distribution rail 250A 6x M8 including ABS cover

DC distribution rail 250A 6x M8 including ABS cover

DC Distribution Rail 250A 6x M8 including ABS cover Victron Busbar 250 A with 6 terminals This distribution rail from Victron Energy features six heavy-duty bolt connections on a single continuous strip of tinned copper. You use it as a central distribution point for either the positive or negative of a DC installation: one supply from the battery, and five outgoing connections to consumers, chargers, or inverters. The rail is suitable for 250 A at a maximum of 70 VDC and comes with a removable protective cover. Applications Six heavy-duty connection points at 250 A are exactly enough for most complete installations: battery, inverter/charger, charge controller, bow thruster, and consumer group each get their own bolt, with room left for expansion. Everything on one strip, with the cover over it and without stacked cable lugs on a battery terminal. * Yachts and commercial vessels with multiple heavy DC consumers * Off-grid and backup installations up to 250 A * Central positive or negative point behind a main fuse * Installations with multiple charging sources side by side Heavy-duty connections The six bolts have a diameter of 8 mm (5/16 inch) and are 17 mm high, more than sufficient for crimp terminals with large cable cross-sections. The recommended tightening torque is 13 N·m: overtightening causes heat generation at high current, while overtightening damages the bolt and the base. Material and construction * Rail strip made of tinned copper, 5 x 24 mm — the tin layer keeps contact resistance low * Bolts made of stainless steel, suitable for marine and humid environments * Nuts made of tinned copper * Base made of ABS, fire class UL 94 V-0 * Cap made of ABS, fire class UL 94 V-2 Selection guide If four connections suffice, that version is lighter and cheaper. If the current remains below 150 A, a busbar from the 150 A series is sufficient. If the current exceeds 250 A, consider the 600 A versions or the Lynx distribution system with integrated fuses and battery monitoring. Documentation * Datasheet Busbar 250 A 4P and 6P with cover (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-Busbar-250-A-4P-and-6P-with-cover-EN.pdf) * 3D Dimensioning 6 connections with cover (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-Busbar-250A-6P-+ABS-cover-3D.pdf) * 3D model (STEP) (https://www.victronenergy.com/upload/documents/DimensionDrawing-Busbar-250A-6P-+ABS-cover-3D.STEP) * Declaration of Conformity – busbars (PDF) (https://www.victronenergy.com/upload/documents/Bus-bar-2024-07-24.pdf) * Victron Energy ISO 9001 Certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) * Victron Energy busbars product page (EN) (https://www.victronenergy.com/dc-distribution-systems/busbars) Victron Energy does not publish a manual or Dutch-language documentation for this item; the datasheet and certificates are in English. Only a 3D drawing is available for this version, not a flat dimensioning PDF. Videos * Victron Energy busbars for electrical installations – 150, 250 and 600 A (Victron Energy, EN) (https://www.youtube.com/watch?v=8Ho2syEYVpA) Contact Are you unsure about the number of connections or the required current for your distribution? Our specialists would be happy to calculate it for you. Contact us (https://www.top.systems/nl/contact/). Available models: > 150A / 70V – 4x high-current connections > 150A / 70V – 6x high-current connections > 250A / 70V – 4x high-current connections > 600A / 70V – 4x high-current connections and 8x low-current connections > 600A / 70V – 4x high-current connections and 8x low-current connections Consult the datasheet for more technical information and for the busbar dimensions. Specifications Maximum current 250 A Maximum voltage 70 VDC Number of connections 6 Connection diameter 8 mm (5/16 inch) Connection height 17 mm Connection material Stainless steel Nut material Tinned copper Recommended tightening torque 13 N·m Burn strip material Tinned copper, 5 x 24 mm Base material ABS, UL 94 V-0 Cap material ABS, UL 94 V-2 Dimensions (hxwxd), with cap 48 x 237 x 70 mm Weight 0.43 kg Manufacturer Victron Energy Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.