DC distribution rail 600A 4x M10 including ABS cover

DC distribution rail 600A 4x M10 including ABS cover

DC Distribution Busbar 600A 4x M10 including ABS cover Victron Busbar 600 A with 4 terminals This heavy-duty distribution busbar from Victron Energy combines two types of connection points on a single strip of tinned copper: four 9.53 mm bolts for battery cables, inverters, and charge sources, and eight small screw terminals for lighter circuits such as monitoring, charge control, and auxiliary power. The busbar is rated for 600 A at a maximum of 70 VDC and comes with a removable protective cover. Applications In an installation of this caliber, two types of cables run side by side: the thick ones that carry the power and the thin ones that measure and control. This busbar brings both together at a single distribution point, with a 19 x 24 mm copper strip that passes through 600 A without complaint. One central positive or negative point, neatly covered, instead of a tangle on the battery terminal. * Commercial shipping and larger yachts with a heavy DC main distribution * Off-grid and ESS installations with multiple inverter/chargers * Commercial vehicles and construction equipment with a substantial onboard network * Installations where main power and metering or control circuits converge at a single point Two types of connections * Four heavy-duty bolts — diameter 9.53 mm (3/8 inch), height 19 mm, stainless steel with flange nut. Tightening torque 20 N·m. * Eight screw terminals — size #8 / 4.2 mm, stainless steel. Tightening torque 2 N·m. Note the difference in tightening torque: 20 N·m on the bolts, 2 N·m on the screws. Exceeding the torque by ten times on the small terminals will strip the threads. Material and construction * Tinned copper rail strip, 19 x 24 mm — heavy-duty dimensioned for 600 A continuous * Stainless steel bolts, nuts, and screws, suitable for marine environments * ABS base, fire class UL 94 V-0 * ABS cover, fire class UL 94 V-2 Selection guide If you require more heavy-duty connection points, the eight-bolt version offers the same current rating and the same eight screw terminals. If the current remains below 250 A, a rail from the 250 A series is more compact and cost-effective. If you want the fuses and battery monitoring integrated immediately, take a look at the Lynx distribution system. Documentation * Datasheet Busbar 600 A with cap (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-Busbar-600-A-EN.pdf) * Declaration of Conformity – busbars (PDF) (https://www.victronenergy.com/upload/documents/Bus-bar-2024-07-24.pdf) * Victron Energy ISO 9001 Certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) * Victron Energy busbars product page (EN) (https://www.victronenergy.com/dc-distribution-systems/busbars) Victron Energy does not publish a manual or Dutch-language documentation for this item; the datasheet and certificates are in English. There is no separate dimensioning drawing; the dimensions are listed in the datasheet. Videos * Victron Energy busbars for electrical installations – 150, 250 and 600 A (Victron Energy, EN) (https://www.youtube.com/watch?v=8Ho2syEYVpA) Contact Unsure about the number of connections or the cable cross-sections for 600 A? Our specialists would be happy to calculate your distribution with you. Please contact us (https://www.top.systems/nl/contact/). Available models: > 150A / 70V – 4x high-current connections > 150A / 70V – 6x high-current connections > 250A / 70V – 4x high-current connections > 600A / 70V – 4x high-current connections and 8x low-current connections > 600A / 70V – 4x high-current connections and 8x low-current connections Consult the datasheet for more technical information and for the busbar dimensions. Specifications Maximum current 600 A Maximum voltage 70 VDC Heavy-duty connections 4 pieces Light-duty connections 8 screw terminals Connection diameter heavy-duty 9.53 mm (3/8 inch) Connection height heavy-duty 19 mm Tightening torque heavy-duty 20 N·m Screw terminals #8 / 4.2 mm, stainless steel Tightening torque screws 2 N·m Connection material Stainless steel Flangen nut material Stainless steel Ribbon strip material Tinned copper, 19 x 24 mm Base material ABS, UL 94 V-0 Cap material ABS, UL 94 V-2 Dimensions (hxwxd), with cap 65 x 216 x 86 mm Weight 0.75 kg Manufacturer Victron Energy Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.