DC double distribution point set black/red M8

DC double distribution point set black/red M8

DC Dual Terminal Stud Set Black/Red M8 Victron Dual Terminal Stud M8 The Victron Energy Dual Terminal Stud M8 is a compact terminal block featuring two stainless steel M8 studs on an insulated base. The two studs are connected by a removable strip of tinned copper. The block is rated for 150 A at a maximum of 70 VDC and is supplied as a set with a positive and a negative version. Applications Sometimes you don't need to be bigger: you want to extend a single cable, connect a second load to the battery terminal, or neatly couple two cables without installing a full busbar system. This block provides exactly two connection points on a fixed, insulated base — saving space, money, and a lot of installation work in a cramped battery cabinet. * Extending a battery cable with an M8 cable lug * Adding an extra connection to a fully charged battery terminal * Connection point between two components in a DC installation * Yachts, motorhomes, commercial vehicles, and industrial applications Construction and materials The threaded ends and nuts are made of stainless steel, making the block suitable for marine environments, engine rooms, and other locations where corrosion plays a role. The connecting strip is made of tinned copper; this tin layer prevents oxidation and keeps contact resistance low over time. The base is made of glass fiber-reinforced nylon: impact-resistant, vibration-resistant, and electrically insulating. Removable connecting strip The copper strip between the two threaded ends can be detached. This allows you to choose whether the two points are connected or remain separate — useful when you want to use the block as two independent connection points instead of as a connection. Mounting The block is screwed onto a solid surface. Maintain the recommended tightening torque of 10 N·m when securing the cable lugs; Overtightening damages the threaded end and the base; overtightening causes heat generation at high currents. Selection Guide: If you require more than two connection points, busbar distribution is the better choice. Victron supplies these in 150 A, 250 A, and 600 A with four to eight heavy-duty terminals, each with a removable protective cover. This product is intended for situations where exactly two connection points suffice. Documentation * Datasheet Dual terminal stud M8 (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-Dual-terminal-stud-M8-EN.pdf) * Declaration of Conformity – busbars (PDF) (https://www.victronenergy.com/upload/documents/Bus-bar-2024-07-24.pdf) * Victron Energy ISO 9001 Certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) * Overview of DC distribution systems and fuses (EN) (https://www.victronenergy.com/dc-distribution-systems) Victron Energy does not publish a manual or Dutch-language documentation for this product; only the datasheet and certificates are available, in English. Contact Are you unsure whether this block is sufficient or if busbar distribution would be more sensible for your installation? Our specialists would be happy to review the currents and number of connections with you. Please contact us (https://www.top.systems/nl/contact/). Specifications Maximum current 150 A Maximum voltage 70 VDC Threaded rod diameter M8 (5/16 inch) Threaded rod height 17 mm Threaded rod material Stainless steel Hex nut material Stainless steel Recommended tightening torque 10 N·m Connection strip material Tinned copper, 1.0 x 13 mm Base material Fiberglass reinforced nylon Dimensions (hxwxd) 45 x 43 x 32 mm Weight 70 g Manufacturer Victron Energy Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.