Energy meter EM24 3-phase (max. 65A/phase) Ethernet

Energy meter EM24 3-phase (max. 65A/phase) Ethernet

Energy Meter EM24 3-phase (max. 65A/phase) Ethernet Victron Energy Meter EM24 — 3-phase, max. 65 A per phase, Ethernet Three-phase energy meter with LCD screen and built-in configuration joystick, with direct measurement up to 65 A per phase. This version communicates via Ethernet: one network cable to the GX device, no RS485 interface required. The data appears on the GX device and on the VRM portal. Applications If a network cable is already present in the meter cabinet, Ethernet is the simplest route: connect, IP address, done — without a USB interface on the GX device and without bus length limitation. Furthermore, the screen and joystick allow you to read and configure settings on-site, even if the GX device is located elsewhere. Practical in commercial buildings where technology is dispersed. * Three-phase ESS installations: grid metering as control input * Measuring the output of a PV inverter or an AC generator * Installations where network infrastructure is already in place * Situations where the meter is located far from the GX device * Commercial buildings with tariff selection or pulse metering of gas, water, or district heating Measurement and display * Three phases, direct measurement up to 65 A per phase * TRMS measurement, even with distorted sine waves of voltage and current * Three-line LCD screen (1x 8 digits, 2x 4 digits) with alphanumeric indicators * Direct readout of variables with four digits * Built-in joystick for configuration on the device itself Communication and inputs * Ethernet communication to the GX device * Three digital inputs for tariff selection or for pulse metering of gas, water, or district heating Design * DIN rail housing * Auxiliary power supply 115 to 230 V AC, 48 to 62 Hz * Protection degree IP50 on the front, IP20 at the screw terminals * CE and cULus Point to note during commissioning Turn the selector switch on the front out of the locked position before configuring the meter. If you wish to use a three-phase meter in a single-phase installation to measure the grid on one input and a PV inverter on another phase, the manufacturer recommends the EM540 instead of this meter. Can be ordered directly with this * Victron Cerbo GX MK2 (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-cerbo-gx-mk2.html) (BPP900451100) — the GX device that processes the measured values ​​and transmits them to the VRM. Category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/). Related products * Energy meter EM540, 3-phase, max. 65 A per phase (https://shop.top.systems/installatie/energiemeters/energiemeter-em540-3-phase-max-65a-phase.html) (REL200100100) — the faster and more compact RS485 version * Victron Energy meter 3-phase VM-3P75CT (https://shop.top.systems/installatie/energiemeters/victron-energiemeter-3-fase-vm-3p75ct.html) (REL200300100) — with plug-in current transformers, Ethernet and VE.Can * Energy meter ET340, 3-phase, max. 65 A (https://shop.top.systems/installatie/energiemeters/energiemeter-et340-3-fase-max-65a.html) (REL300300000) — more affordable, without display Documentation Victron Energy publishes one combined manual for the ET112, ET340, EM24, and EM540 energy meters. It is available in Dutch. * Victron Energy Meters product page (NL) (https://www.victronenergy.nl/meters-and-sensors/energy-meter) * EM24 Ethernet Energy Meter Manual (NL, PDF) (https://www.victronenergy.com/upload/documents/Energy_Meter_EM24_Ethernet/113406-Energy_Meters-pdf-nl.pdf) * Energy Meter manual (EN, PDF) (https://www.victronenergy.com/upload/documents/Energy_Meter_ET112/113406-Energy_Meters-pdf-en.pdf) * Manual via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Manuals/REL200200100_energiemeter-eM24-3-fase-max–65a-fase-ethernet.pdf) * Datasheet via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Datasheets/REL200200100.pdf) Contact Ethernet or RS485, and which GX device to go with it? Our specialists will put together the complete measurement solution for you. Contact us (https://www.top.systems/nl/contact/). Specifications Number of phases 3 Maximum current 65 A per phase, direct measurement Communication Ethernet Digital inputs 3, for tariff selection or pulse measurement Display 3-line LCD (1x 8 and 2x 4 digits) Operation Built-in configuration joystick Measurement method TRMS Auxiliary power supply 115 to 230 V AC, 48 to 62 Hz Protection class IP50 front, IP20 screw terminals Certifications CE, cULus Mounting DIN rail Manufacturer Carlo Gavazzi, supplied under Victron Energy EAN 8719076051268 Weight 0.351 kg We would be happy to provide you with more information about this product. Please take contact join us.