Victron Argofet 100-2 100A

Victron Argofet 100-2 100A

Victron Argofet 100-2 100A Victron Argofet 100-2 100A Applications For motorhomes, yachts, and commercial vehicles where a starter and a service battery bank are charged from the same alternator or battery charger. The virtually negligible voltage drop allows each battery bank to reach the full charging voltage without compensation. Two battery banks from one charge source This charge current distributor distributes the current from one alternator or battery charger across two battery banks without connecting them to each other. During discharge, the battery banks remain separate: a draining service battery does not drag the starter battery down with it. FET technology instead of diodes * Voltage drop less than 0.02 V at low current * Average voltage drop 0.1 V at higher current * Maximum charging current 100 A * Maximum alternator current 100 A * Nominal 12 V and 24 V Because virtually no voltage is lost, each battery bank reaches the full charging voltage and a compensation diode is not required. Energize connection Some alternators require voltage on the B+ terminal before they start charging. For this purpose, a separate, current-limited energize input is present that energizes B+ as soon as the ignition is switched on. Connections * Input, output 1, and output 2 on M8 bolts * Separate energize connection * Ground connection * Passively cooled, no fan or maintenance Available to order directly * Fuse holder 3mm² black push-in fuse (IP67) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=63&artdetail=ZEKHD0000300) – ZEKHD0000300 Related products * Victron Argofet 100-3 100A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-argofet-100-3-100a.html) – ARG100301020R Documentation * Datasheet Argofet Battery Isolators (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Argofet-Battery-Isolators-with-alternator-energize-input-EN-.pdf) * Argofet Charge Distribution Panel Manual (NL and EN) (https://www.victronenergy.com/upload/documents/Manual-Argofet-EN-NL-FR-DE-IT-ES-SE-TR.pdf) * Argofet 100-2 Dimensions (PDF) (https://www.victronenergy.com/upload/documents/Argofet-100-2-2-batteries-100A-isolator.pdf) * Argofet 100-2 Dimensions (STP file) (https://www.victronenergy.com/upload/documents/Argofet-100-2-2-batteries-100A-isolator.stp) * IEC Safety Certificate 60335-1 (https://www.victronenergy.com/upload/documents/Certificate-Safety-IEC-60335-1-Argodiodes-Argofets-and-Diode-Battery-Combiners.pdf) * Declaration of Conformity Argo battery isolators (https://www.victronenergy.com/upload/documents/Argo-Battery-Isolator-and-BCD-Battery-Combiner-2021-12-29.pdf) Contact Not sure if your alternator requires an energize pulse or which cable cross-section corresponds to 100 A? Our specialists would be happy to review your complete charging setup with you. Contact us (https://www.top.systems/nl/contact/) for tailored advice. Specifications Maximum charging current 100 A Maximum alternator current 100 A Number of battery outlets 2 Nominal voltage 12 V and 24 V Voltage drop at low current Less than 0.02 V Voltage drop at higher current Average 0.1 V Technology FET Energize connection Yes, current limited Connections M8 bolts Dimensions (hxwxd) 65 x 120 x 200 mm Weight 1.4 kg Safety standard IEC 60335-1 EAN 8719076019022 We would be happy to provide you with more information about this product. Please contact us contact join us.