Victron Argofet 200-2 200A

Victron Argofet 200-2 200A

Victron Argofet 200-2 200A Victron Argofet 200-2 200A Applications For workboats, yachts, and heavy equipment with a powerful alternator and two separate battery banks. The M8 bolts accommodate large cable cross-sections, and the voltage drop remains limited to an average of only 0.1 V, even at 200 A. Two battery banks from a single charge source This charge current distributor distributes the current from one alternator or battery charger across two battery banks without interconnecting them. During discharge, the battery banks remain separate: a draining service battery does not drag the starter battery down with it. FET technology instead of diodes * Voltage drop less than 0.02 V at low current * Average voltage drop 0.1 V at higher current * Maximum charging current 200 A * Maximum alternator current 200 A * Nominal 12 V and 24 V Because virtually no voltage is lost, each battery bank reaches the full charging voltage, and a compensation diode is not required. Energize connection Some alternators require voltage on the B+ terminal before they start charging. For this purpose, a separate, current-limited energize input is present that energizes B+ as soon as the ignition is switched on. Connections * Input, output 1, and output 2 on M8 bolts * Separate energize connection * Ground connection * Passively cooled, no fan or maintenance Available to order directly * Fuse holder 3mm² black push-in fuse (IP67) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=63&artdetail=ZEKHD0000300) – ZEKHD0000300 Related products * Victron Argofet 200-3 200A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-argofet-200-3-200a.html) – ARG200301020R Documentation * Datasheet Argofet Battery Isolators (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Argofet-Battery-Isolators-with-alternator-energize-input-EN-.pdf) * Argofet Charge Distribution Panel Manual (NL and EN) (https://www.victronenergy.com/upload/documents/Manual-Argofet-EN-NL-FR-DE-IT-ES-SE-TR.pdf) * Argofet 200-2 Dimensions (PDF) (https://www.victronenergy.com/upload/documents/Argofet-200-2-2-batteries-200A-isolator.pdf) * Argofet 200-2 Dimensions (STP file) (https://www.victronenergy.com/upload/documents/Argofet-200-2-2-batteries-200A-isolator.stp) * IEC Safety Certificate 60335-1 (https://www.victronenergy.com/upload/documents/Certificate-Safety-IEC-60335-1-Argodiodes-Argofets-and-Diode-Battery-Combiners.pdf) * Declaration of Conformity Argo battery isolators (https://www.victronenergy.com/upload/documents/Argo-Battery-Isolator-and-BCD-Battery-Combiner-2021-12-29.pdf) Contact At 200 A, cable cross-section, fuse rating, and mounting location require close attention. Our specialists would be happy to calculate your charging setup with you and help you think through the complete installation. Contact us (https://www.top.systems/nl/contact/) for tailored advice. Specifications Maximum charging current 200 A Maximum alternator current 200 A Number of battery outlets 2 Nominal voltage 12 V and 24 V Voltage drop at low current Less than 0.02 V Voltage drop at higher current Average 0.1 V Technology FET Energize connection Yes, current limited Connections M8 bolts Dimensions (hxwxd) 65 x 120 x 200 mm Weight 1.4 kg Safety standard IEC 60335-1 EAN 8719076019145 We would be happy to provide you with more information about this product. Please contact us contact join us.