Victron Argofet 200-3 200A

Victron Argofet 200-3 200A

Victron Argofet 200-3 200A Victron Argofet 200-3 200A Applications For workboats, yachts, and heavy equipment with a powerful alternator and three separate battery banks. The M8 bolts accommodate large cable cross-sections, and the voltage drop remains limited to an average of only 0.1 V, even at 200 A. Three battery banks from a single charge source This charge distributor distributes the current from a single alternator or battery charger across three battery banks without interconnecting them. Think of a starter battery, a service battery bank, and a separate battery bank for a bow thruster or winch. FET technology instead of diodes * Voltage drop less than 0.02 V at low current * Average voltage drop 0.1 V at higher current * Maximum charging current 200 A * Maximum alternator current 200 A * Nominal 12 V and 24 V Because virtually no voltage is lost, every battery bank reaches the full charging voltage and a compensation diode is not required. Energize connection Some alternators require voltage on the B+ terminal before they start charging. For this purpose, a separate, current-limited energize input is present that energizes B+ as soon as the ignition is switched on. Connections * Input, output 1, output 2, and output 3 on M8 bolts * Separate energize connection * Ground connection * Passively cooled, no fan or maintenance Available to order directly * Fuse holder 3mm² black push-in fuse (IP67) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=63&artdetail=ZEKHD0000300) – ZEKHD0000300 Related products * Victron Argofet 200-2 200A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-argofet-200-2-200a.html) – ARG200201020R Documentation * Datasheet Argofet Battery Isolators (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Argofet-Battery-Isolators-with-alternator-energize-input-EN-.pdf) * Argofet Charge Distribution Panel Manual (NL and EN) (https://www.victronenergy.com/upload/documents/Manual-Argofet-EN-NL-FR-DE-IT-ES-SE-TR.pdf) * Argofet 200-3 Dimensions (PDF) (https://www.victronenergy.com/upload/documents/Argofet-200-3-3-batteries-200A-isolator.pdf) * Argofet 200-3 Dimensions (STP file) (https://www.victronenergy.com/upload/documents/Argofet-200-3-3-batteries-200A-isolator.stp) * IEC Safety Certificate 60335-1 (https://www.victronenergy.com/upload/documents/Certificate-Safety-IEC-60335-1-Argodiodes-Argofets-and-Diode-Battery-Combiners.pdf) * Declaration of Conformity Argo battery isolators (https://www.victronenergy.com/upload/documents/Argo-Battery-Isolator-and-BCD-Battery-Combiner-2021-12-29.pdf) Contact With 200 A across three outputs, cable cross-section, fuse rating, and mounting location require close attention. Our specialists would be happy to calculate your charging setup with you. Contact us (https://www.top.systems/nl/contact/) for tailored advice. Specifications Maximum charging current 200 A Maximum alternator current 200 A Number of battery outlets 3 Nominal voltage 12 V and 24 V Voltage drop at low current Less than 0.02 V Voltage drop at higher current Average 0.1 V Technology FET Energize connection Yes, current limited Connections M8 bolts Dimensions (hxwxd) 65 x 120 x 200 mm Weight 1.4 kg Safety standard IEC 60335-1 EAN 8719076019169 We would be happy to provide you with more information about this product. Please contact us contact join us.