Victron Battery monitor BMV-710H Smart
Victron Battery Monitor BMV-710H Smart Victron BMV-710H Smart Battery Monitor The BMV-710H Smart is the high-voltage version of the Victron Energy BMV battery monitor with built-in Bluetooth, intended for systems with a battery voltage of 60 to 385 VDC. The device measures battery voltage and current and calculates the state of charge, consumed ampere-hours, and remaining runtime from this. Reading and setting can be done on the display as well as directly via the VictronConnect app; a dongle is not required. Due to the high voltage, the included 500 A / 50 mV shunt is housed in a separate enclosure. Applications With a high-voltage battery pack, you don't want to need a screwdriver to change settings. With onboard Bluetooth, you can read everything and adjust the configuration from your phone, at a safe distance from the pack. Furthermore, it offers the same measurement accuracy as the rest of the BMV series, up to 385 VDC and without additional components. * Electric drive and marine propulsion * Large off-grid packages of 96 V, 144 V, or higher * Industrial DC systems and traction packages * Installations where remote operation of the package is desired Bluetooth and the VictronConnect app Bluetooth is built-in. Via the app, you can read all measured values, change settings, view the history, and update the firmware. The Bluetooth function can be switched off and on again, and the PIN code can be changed. What it shows * Battery voltage, current, and power * Ampere-hours consumed, state of charge, and remaining runtime * History: deepest discharge, average discharge, number of cycles, total charged and discharged kWh The voltage readout resolution is ± 0.01 V up to 100 V and ± 0.1 V above that. With the supplied shunt, the current range is from -500 to +500 A. Important: only with grounded negative terminal. The battery monitor is not galvanically isolated from the shunt and is therefore only suitable for systems with a grounded negative terminal. Take this into account in the design before deploying the device in a high-voltage installation. Alternative shunts. The monitor operates with the supplied 500 A / 50 mV shunt but can be configured for different shunts up to 10,000 A. Connection and expansion. The monitor can be connected to a GX device via the VE.Direct port, after which the data is available locally and via the VRM portal. The monitor can participate in VE.Smart networking. Programmable relay. The relay (60 V / 1 A, normally open, reversible) switches based on low charge state, low voltage, or high voltage. This allows, for example, a charger to be started or a load to be switched off before the battery pack discharges too much. Alarms can be set individually, including a buzzer. Installation The display unit is mounted flush with a panel; included are a round display unit, a square cover bezel, and a screw ring. The shunt, inside its housing, is the only component connected to the negative terminal of the battery pack; all consumers and chargers connect to the other side. Documentation * BMV-710H Smart Manual (EN, HTML5) (https://www.victronenergy.com/media/pg/BMV-710H_Smart/en/index-en.html) * BMV-710H Smart Manual (EN, PDF) (https://www.victronenergy.com/upload/documents/BMV-710H_Smart/9172-Manual_BMV_and_SmartShunt-pdf-en.pdf) * BMV-7xx Quick Installation Guide (EN, PDF) (https://www.victronenergy.com/upload/documents/Quickinstallsheet_BMV-7XX_2020.pdf) * BMV-700 Series Datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-BMV-700-series-EN.pdf) * VictronConnect App Manual (EN, HTML5) (https://www.victronenergy.com/media/pg/VictronConnect_app/en/index-en.html) * EU Declaration of Conformity (PDF) (https://www.victronenergy.com/upload/documents/BMV-All-type-EU-DOC-RED.pdf) * Victron Energy ISO 9001 Certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Victron Energy does not publish Dutch-language documentation for this article; the manual, the datasheet, and the certificates are in English. Videos * How to connect the BMV-700 battery monitor (Victron Energy, EN) (https://www.youtube.com/watch?v=MRljOaTdc3s) * How to optimize the BMV-700 series sync parameters (Victron Energy, EN) (https://www.youtube.com/watch?v=4ReljfO3k6M) * How to set up BMV battery monitor for lead and lithium batteries (Victron Energy, EN) (https://www.youtube.com/watch?v=mEN15Z_S4kE) Contact Are you working on a high-voltage installation and unsure about the shunt selection or the requirement for a grounded negative? Our specialists would be happy to assist you with the design. Please contact us (https://www.top.systems/nl/contact/). Specifications Supply voltage 60 – 385 VDC Bluetooth Built-in Self-consumption, lighting off 3 mA at 144 V and at 288 V Additional input Not present on this model Adjustable battery capacity 1 – 9999 Ah Current range with included shunt -500 to +500 A Alternative shunts Adjustable up to 10,000 A Communication port VE.Direct Relay 60 V / 1 A, normally open, function reversible Voltage resolution ± 0.01 V (0 – 100 V), ± 0.1 V (100 – 385 V) Current resolution ± 0.01 A Ampere-hour resolution ± 0.1 Ah State of charge resolution ± 0.1 % Current measurement accuracy ± 0.4 % Voltage measurement accuracy ± 0.3 % Included shunt 500 A / 50 mV in separate housing Included Display unit, square cover bezel, screw ring, 10 m UTP RJ12 cable, fused power cable System requirement: Suitable only for systems with grounded negative Mounting: Flush panel mounting Front: Diameter 63 mm, cover bezel 69 x 69 mm Display unit housing: Diameter 52 mm, installation depth 31 mm Display protection class: IP55, not intended for outdoor use Operating temperature: -40 to +50 °C Safety: EN 60335-1, EMCEN 55014-1 / EN 55014-2 Warranty: 5 years We would be happy to provide you with more information about this product. Please contact us
contact join us.
