Victron BatteryProtect 12/24V-220A

Victron BatteryProtect 12/24V-220A

Victron BatteryProtect 12/24V-220A Victron BatteryProtect 12/24V-220A Applications The heaviest-duty 12/24 V version, for installations with a large inverter, bow thruster, or winch on the protected circuit. Protects the battery against deep discharge and retains enough capacity to start the engine. What battery protection does A deeply discharged battery loses capacity and sometimes its entire lifespan. The module monitors the battery voltage and disconnects non-essential consumers before it gets to that point, or sooner, so that enough remains to start the engine. Spark-free switching Switching is performed using MOSFETs instead of a mechanical relay contact. Therefore, there is no sparking and no contact wear, which is important in areas where battery gases may linger. Adjustable and with lithium mode * Automatic detection of 12 or 24 V system voltage * Adjustable thresholds for switching off and switching back on * Separate lithium mode, controllable by a VE.Bus BMS * Delayed alarm output, loadable up to 50 mA and short-circuit proof Delayed switching The load is switched off only 90 seconds after the alarm, and switched back on only 30 seconds after the battery voltage is sufficient again. This prevents the system from switching back and forth during short voltage dips. Specifications * 220 A continuous, 600 A peak * Operating range 6 to 35 V * Quiescent current 0.6 mA in switched-off state * M8 terminals * Dimensions 62 x 123 x 120 mm, weight 0.8 kg * Electronics IP67 potted, terminals IP00 Related products * Victron BatteryProtect 12/24V-220A Smart (https://shop.top.systems/beveiligen-schakelen/relais/victron-batteryprotect-12-24v-220a-smart.html) (BPR122022000) * Victron BatteryProtect 12/24V-100A (https://shop.top.systems/beveiligen-schakelen/relais/victron-batteryprotect-12-24v-100a.html) (BPR000100400) * Victron BatteryProtect 48V-100A (https://shop.top.systems/beveiligen-schakelen/relais/victron-batteryprotect-48v-100a.html) (BPR048100400) Documentation * BatteryProtect 12/24V Manual (NL, PDF) (https://www.victronenergy.com/upload/documents/BatteryProtect_12V_24V/114439-Smart_BatteryProtect-pdf-nl.pdf) * BatteryProtect 12/24V Manual (EN, PDF) (https://www.victronenergy.com/upload/documents/BatteryProtect_12V_24V/114439-Smart_BatteryProtect-pdf-en.pdf) * Online Manual (EN) (https://www.victronenergy.com/media/pg/BatteryProtect_12V_24V/en/index-en.html) * Datasheet BatteryProtect 65A, 100A & 220A (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Battery-Protect-65-A–100-A–220-A-EN-.pdf) * Automotive certificate ECE R10-6 (EN) (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-BatteryProtect-12V-24V-220A-and-100A.pdf) * Safety certificate IEC 60335-1 (EN) (https://www.victronenergy.com/upload/documents/Certificate-Safety-IEC-60335-1-BatteryProtect.pdf) Videos * Victron Energy: BatteryProtect introduction (EN) (https://www.youtube.com/watch?v=mg0kwJIo-5U) * Victron Energy: Programming BatteryProtect (EN) (https://www.youtube.com/watch?v=HmN8srNlg5g) Contact Would you like to know if 220 A is sufficient for your bow thruster or inverter, and which fuse is required? Our specialists would be happy to calculate it for you. Please contact us (https://www.top.systems/nl/contact/). Specifications Maximum continuous load current 220 A Peak current 600 A System voltage 12 and 24 V, automatic detection Operating voltage range 6 to 35 V Quiet current switched off 0.6 mA Alarm output 50 mA, short-circuit proof, delayed Switch-off delay 90 seconds after alarm Switch-on delay 30 seconds after voltage recovery Lithium mode Yes, controllable by a VE.Bus BMS Connections M8 Protection class Electronics IP67 encapsulated, connections IP00 Operating temperature -40 to +40 °C Dimensions (hxwxd) 62 x 123 x 120 mm Weight 0.8 kg We would be happy to provide you with more information about this product. Please contact us contact join us.