Victron Blue Smart IP22 Battery Charger 24/16 (1) CEE 7/7

Victron Blue Smart IP22 Battery Charger 24/16 (1) CEE 7/7

Victron Blue Smart IP22 Battery Charger 24/16 (1) CEE 7/7 The Victron BlueSmart IP22 24/16(1) CEE 7/7 battery charger is designed for charging 24V battery systems from 230VAC. The charging current of this charger is 16A according to a six-stage adaptive intelligent charging algorithm, allowing 24V battery systems with a battery capacity between 80Ah and 160Ah to be charged. The charger is equipped with a 1.5 meter 230V cable with a round CEE 7/7 contour plug for Schuko sockets. All IP22 models feature a plastic-aluminum housing with brackets for easy mounting. Battery cables (not included) can be connected to 13 mm² screw terminals. The compact design ensures that the Blue Smart IP22 battery chargers can be easily installed for indoor use in many environments, such as a garage, shed, stable, or in a boat or camper. Bluetooth Smart The Blue Smart IP22 battery charger is the wireless solution for monitoring voltage and current, changing settings, and updating the charger when new features become available. Extremely efficient With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard. And once the battery is fully charged, power consumption drops to 0.5W. That is even five to ten times better than the industry standard. Adaptive 6-stage charging algorithm The adaptive six-stage charging algorithm consists of: test – bulk charge – absorption charge – reconditioning – trickle charge – storage. The Blue Smart charger features microprocessor-controlled 'adaptive' battery management. The adaptive function automatically optimizes the charging process depending on how the battery is used. Storage mode Thanks to storage mode, there is less maintenance and aging when the battery is not in use. Storage mode is activated if the battery is not discharged for 24 hours. In that case, the float voltage is reduced to 4.4V/cell (26.4V for a 24V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is raised again to the absorption level to 'recharge' the battery. This prevents stratification of the electrolyte and sulfation, the main cause of premature battery failure. Suitable for lithium-ion (LiFePO₄) batteries. LiFePO₄ batteries are charged using a simple algorithm of bulk charge – absorption charge – trickle charge. NIGHT and LOW settings. In NIGHT or LOW mode, the output current is reduced to a maximum of 50% of the nominal output current, and the battery charger operates completely silently. NIGHT mode ends automatically after 8 hours. LOW mode can be terminated manually. Protected against overheating. The output current decreases if the temperature rises to 50ºC, but the Blue Smart charger does not switch off. Eleven LEDs for status indication Charging algorithm: TEST / BULK CHARGE / ABSORPTION CHARGE / RECONDITIONING / TRIPLE CHARGE / STORAGE / READY MODE button for setting: NORMAL (28.8V) / HIGH (29.4V) / RECONDITIONING / LI-ION We would be happy to provide you with more information about this product. Please contact us contact join us.