Victron BlueSolar PWM Light 12/24V-30A

Victron BlueSolar PWM Light 12/24V-30A

Victron BlueSolar PWM-Light 12/24V-30A Applications The heaviest version in this series: 30 A charging current for multiple panels in parallel on a single battery bank. For outdoor lighting, pasture fencing, meter boxes, log cabins, and work units where a simple, robust controller suffices. PWM charge control * Three-stage charging: bulk, absorption, and trickle — not programmable * Absorption 14.2 V (12V) / 28.4 V (24V), trickle 13.8 V / 27.6 V * Self-consumption less than 10 mA Automatic voltage detection Automatically recognizes whether it is a 12V or 24V battery bank. Maximum solar voltage 28 V at 12V and 55 V at 24V. Use a 36-cell panel for 12V and a 72-cell panel or two 36-cell panels in series for 24V. Connect multiple panels in parallel. PWM and MPPT: PWM requires a panel voltage close to the battery voltage. If the panel voltage is higher or you wish to use longer strings, choose an MPPT charger. Load output and lighting control * Manual operation plus automatic low-voltage shutdown * Shut-off at 11.2 V / 22.4 V * Re-switch-on at 12.6 V / 25.2 V manually or 13.1 V / 26.2 V automatically * Lighting control with one timer * Two-digit seven-segment display for setting the load function and the timer Protections * Reverse polarity of battery and solar panel * Short circuit on the load output: immediate shutdown * Overload: off after 60 seconds at 130%, after 5 seconds at 160% * Over-temperature Mounting and connection Terminals up to 5 mm² (AWG10). Protection class IP20, therefore exclusively for dry indoor mounting. Operating temperature -20 to +50 °C at full load. Can be ordered directly with this * Cable set 10mm² 1.5 m red and black M8 — KABSET010100 — product (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=41&artdetail=KABSET010100) Related products * Victron BlueSolar PWM-Light 12/24V-5A — SCC010005000 — view product (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-bluesolar-pwm-light-12-24v-5a.html) * Victron BlueSolar PWM-Light 12/24V-10A — SCC010010000 — view product (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-bluesolar-pwm-light-12-24v-10a.html) * Victron BlueSolar PWM-Light 12/24V-20A — SCC010020020 — view product (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-bluesolar-pwm-light-12-24v-20a.html) Documentation * Datasheet BlueSolar PWM-Light 12/24V (NL) (https://www.victronenergy.com/upload/documents/Datasheet-BlueSolar-PWM-Light-Charge-Controllers-12-24V-NL.pdf) * Datasheet BlueSolar PWM-Light 12/24V (EN) (https://www.victronenergy.com/upload/documents/Datasheet-BlueSolar-PWM-Light-Charge-Controllers-12-24V-EN.pdf) * BlueSolar PWM-Light 12/24V Manual (EN) (https://www.victronenergy.com/upload/documents/Manual-BlueSolar-PWM-Light-12-24V-Charge-Controller-EN-A4.pdf) * BlueSolar PWM-Light and DUO EU Declaration of Conformity (https://www.victronenergy.com/upload/documents/BlueSolar-PWM-Light-and-DUO-Charge-Controllers-2021-12-29.pdf) * Technical Information: which solar charge controller, PWM or MPPT (EN) (https://www.victronenergy.com/upload/documents/Technical-Information-Which-solar-charge-controller-PWM-or-MPPT.pdf) * ISO 9001 certificate (NL) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-NL.pdf) * ISO 9001 certificate (EN) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Contact Are you unsure between PWM and MPPT, or about the panel configuration for your battery voltage? Our specialists will calculate it for you and supply the panel, cable, and protection all at once. Contact us (https://www.top.systems/nl/contact/). Specifications Specification Value Charge controller type PWM Battery voltage 12 / 24 V, automatic detection Nominal charging current 30 A Maximum solar voltage 28 V (12V) / 55 V (24V) Charging characteristic Three-step, non-programmable Absorption voltage 14.2 V / 28.4 V Trickle voltage 13.8 V / 27.6 V Low voltage shutdown 11.2 V / 22.4 V Load restart 12.6 V / 25.2 V manual, 13.1 V / 26.2 V automatic Load output Manual operation and low voltage shutdown Lighting control Yes, one timer Display Two-digit seven-segment Own consumption < 10 mA Protections Reverse polarity battery and PV, short circuit, overload, overtemperature Terminals 5 mm² (AWG10) Operating temperature -20 to +50 °C at full load Humidity Max. 95%, non-condensing Protection class IP20 Dimensions (hxwxd) 70 x 133 x 33.5 mm Safety IEC 62109-1 EMCEN 61000-6-1, EN 61000-6-3, ISO 7637-2 EAN 8719076025405 We would be happy to provide you with more information about this product. Please contact us contact join us.