Victron BlueSolar MPPT 250/70-Tr VE.Can (12/24/48V)

Victron BlueSolar MPPT 250/70-Tr VE.Can (12/24/48V)

Victron BlueSolar MPPT 250/70-Tr VE.Can (12/24/48V) Victron BlueSolar MPPT 250/70-Tr VE.Can (12/24/48V) Applications For installations with long PV cables or many panels in series: up to 250 V PV voltage means fewer strings, thinner cables, and lower losses. Suitable for yachts, commercial vessels, and off-grid systems up to 4000 Wp, expandable via VE.Can. High PV voltage up to 250 V Due to the higher maximum array voltage, you connect more panels in series. This reduces the current in the PV cabling, allowing you to use a smaller cross-section and limiting voltage loss over long runs. Ultra-fast MPPT tracking The tracking algorithm responds immediately to changing light conditions and actively searches for the actual maximum power point in partial shade instead of a local maximum. Flexible system voltage * 70 A nominal charging current * 12, 24, and 48 V automatic detection, 36 V manually adjustable * Nominal PV power 1000 W at 12 V, 2000 W at 24 V, 3000 W at 36 V, and 4000 W at 48 V * Maximum PV short-circuit current 35 A VE.Can and parallel operation In addition to VE.Direct, the controller features VE.Can. This allows you to synchronize up to 25 controllers and connect them to a GX device as a communication center. The data is then also available in the VRM Portal (https://vrm.victronenergy.com/login). Adjustable charging algorithm Adaptive multi-stage charging with eight pre-programmed charging algorithms and a freely configurable profile for lead-acid, AGM, gel, and lithium. Absorption, float, and equalization can be set individually, with temperature compensation of -16/-32/-64 mV/°C. Monitoring and settings: Via VE.Direct, you can read out the controller using VictronConnect on a smartphone, tablet, or laptop, with the VE.Direct Bluetooth Smart dongle, or the VE.Direct to USB interface. MPPT Control is available for a fixed reading on the panel. Programmable relay and remote on/off * Programmable DPST relay, 4 A up to 240 VAC and 4 A up to 35 VDC / 1 A up to 60 VDC * Remote on/off, controllable from a VE.Bus battery management system, among others Connection and installation * Screw terminals up to 35 mm² / AWG2 for PV and battery * Dimensions 185 x 250 x 95 mm, weight 3 kg * IP43 for the electronics, IP22 for the connection area Protection features * Protection against reverse polarity of the PV input * Short-circuit protection on the output * Over-temperature protection with power reduction above 40 °C Available to order directly * Victron MPPT Control (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-mppt-control.html) (SCC900500000) * Victron VE.Direct cable 10m (https://shop.top.systems/installation/kabels/communication/victron-ve-direct-kabel-10m.html) (ASS030530310) * Victron VE.Direct Bluetooth Smart dongle (https://shop.top.systems/monitoring-control/draadloos/victron-ve-direct-bluetooth-smart-dongle.html) (ASS030536011) * Victron VE.Direct to USB interface (https://shop.top.systems/installation/interface/victron-ve-direct-to-usb-interface.html) (ASS030530010) * Victron VE.Direct non-inverting remote on-off cable (https://shop.top.systems/installation/kabels/remote-control/victron-ve-direct-non-inverting-remote-on-off-cable.html) (ASS030550320) * Cable set 35mm² 1.5 mtr red and black M8 (https://shop.top.systems/installatie/kabels/accu/kabelset-35mm-1-5-mtr-rood-en-zwart-m8.html) (KABSET010350) Related products * Victron BlueSolar MPPT 250/100-Tr VE.Can (12/24/48V) (https://shop.top.systems/zonnestroom/omvormers-zonnepanelen/victron-bluesolar-mppt-250-100-tr-ve-can-12-24-48v.html) (SCC125110441) Documentation * Manual BlueSolar MPPT 150/70 to 250/100 VE.Can (NL, PDF) (https://www.victronenergy.com/upload/documents/Manual_BlueSolar_MPPT_150-70_up_to_250-100_VE.Can/29694-MPPT_solar_charger_manual-pdf-nl.pdf) * BlueSolar MPPT Manual 150/70 to 250/100 VE.Can (EN, PDF) (https://www.victronenergy.com/upload/documents/Manual_BlueSolar_MPPT_150-70_up_to_250-100_VE.Can/29694-MPPT_solar_charger_manual-pdf-en.pdf) * Technical specifications online (EN) (https://www.victronenergy.com/media/pg/Manual_BlueSolar_MPPT_150-70_up_to_250-100_VE.Can/en/technical-specifications.html) * Datasheet MPPT 250/70, 150/100 & 250/100 VE.Can (NL) (https://www.victronenergy.com/upload/documents/Datasheet-BlueSolar-charge-controller-MPPT-250-70,-150-100-&-250-100-VE.Can-NL.pdf) * Datasheet MPPT 250/70, 150/100 & 250/100 VE.Can (EN) (https://www.victronenergy.com/upload/documents/Datasheet-BlueSolar-charge-controller-MPPT-250-70,-150-100-&-250-100-VE.Can-EN.pdf) * Dimensioning drawing 150/70 & 250/70 Tr VE.Can (EN) (https://www.victronenergy.com/upload/documents/DimensionDrawing-SS-MPPT-150-250-70-Tr-VE.Can-(L).pdf) Contact Curious how many panels you can connect in series at your lowest design temperature? Our specialists would be happy to calculate the string configuration with you. Please contact us (https://www.top.systems/nl/contact/). Specifications Nominal charging current 70 A Battery voltage 12 / 24 / 48 V automatic, 36 V manually adjustable Maximum PV voltage 250 V absolute, 245 V at startup and operation Maximum PV short-circuit current 35 A Nominal PV power 12 V 1000 W Nominal PV power 24 V 2000 W Nominal PV power 36 V 3000 W Nominal PV power 48 V 4000 W Maximum efficiency 99 % Self-consumption Less than 35 mA at 12 V, less than 20 mA at 48 V Absorption voltage 14.4 / 28.8 / 57.6 V, adjustable Float voltage 13.8 / 27.6 / 55.2 V, adjustable Equalization voltage 16.2 / 32.4 / 64.8 V, adjustable Charging algorithm Adaptive multi-stage, eight pre-programmed algorithms Temperature compensation -16 / -32 / -64 mV/°C Communication VE.Direct and VE.Can Parallel operation Via VE.Can, maximum 25 units Programmable relay DPST, 4 A up to 240 VAC, 4 A up to 35 VDC, 1 A up to 60 VDC Remote on/off Yes Protections PV reverse polarity, output short circuit, overtemperature Operating temperature -30 to +60 °C, full power up to 40 °C Humidity 95 %, non-condensing Protection class IP43 electronics, IP22 Connection area Battery connection 35 mm² / AWG2 PV connection 35 mm² / AWG2 screw terminal Dimensions (hxwxd) 185 x 250 x 95 mm Weight 3 kg Standards EN/IEC 62109-1, UL 1741, CSA C22.2 We would be happy to provide you with more information about this product. Please contact us contact join us.