Victron Cyrix-ct combiner relay 12/24V-230A

Victron Cyrix-ct combiner relay 12/24V-230A

Victron Cyrix-ct combiner relay 12/24V-230A Victron Cyrix-ct combiner relay 12/24V-230A Applications For motorhomes, boats, and commercial vehicles with a heavier alternator or larger service battery bank. The M8 bolts accommodate generous cable cross-sections, and the LED status indicator immediately shows whether the battery banks are connected or disconnected. Automatic connection and disconnection The microprocessor-controlled relay connects both battery banks in parallel as soon as one of the two reaches the coupling voltage and disconnects them again as soon as the voltage drops. The measurement works bidirectionally: it does not matter which battery bank is being charged. * Switch on between 13.0 and 13.8 V, or between 26.0 and 27.6 V * Switch off between 11.0 and 12.8 V, or between 22.0 and 25.7 V * Intelligent trend detection determines the switching time * Switch-on delay of 10 minutes at 13.0 to 13.2 V, decreasing to 4 seconds at 13.6 to 13.8 V * Switch-off delay of 0 seconds to 3 minutes, depending on the voltage LED status indication An LED shows the operating status of the relay, so that you can immediately see whether the battery banks are connected during commissioning and troubleshooting. A 1-meter control wire is included. Virtually no voltage loss Unlike a diode splitter, this relay switches the battery banks through abruptly. Practically no charging voltage is lost, ensuring both battery banks reach their full charging voltage. Start assist Use the push button to manually connect the battery banks in parallel for 30 seconds. Sufficient to start the service battery bank even with a dead starter battery. Automatic voltage detection and protection * Automatically detects whether the system is 12 or 24 V * Priority for the starter battery * Overheating protection, switches off at excessive temperature * Operating temperature -40 to +60 °C * Protection class IP54 * M8 terminal bolts Note regarding Euro 5 and Euro 6: Not suitable for Euro 5 and Euro 6 engines with an intelligent alternator. These regulate their charging voltage in such a way that a voltage-controlled relay does not switch reliably. Can be ordered directly with this * MEGA-fuse fuse holder 2xM8 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=63&artdetail=ZEKHD0000200) – ZEKHD0000200 * LittelFuse fuse 250A MEGA (12-24V) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=63&artdetail=ZEKLFM000250) – ZEKLFM000250 Related products * Victron Cyrix-ct combiner relay 12/24V-120A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-cyrix-ct-combiner-relais-12-24v-120a.html) – CYR010120011R * Intelligent Combiner Relay (12V) Bi-stable 250A (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=63&artdetail=YTZ069004125) – YTZ069004125 Documentation * Datasheet Cyrix-ct 120A and 230A (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Cyrix-ct-120A-230A-EN.pdf) * Manual Cyrix-ct 230A (NL and EN) (https://www.victronenergy.com/upload/documents/Manual-Cyrix-ct-230-EN-NL-FR-ES-DE-.pdf) * Dimensions Cyrix 230A (PDF) (https://www.victronenergy.com/upload/documents/Cyrix-230A.pdf) * Cyrix 230A Dimensions (STEP file) (https://www.victronenergy.com/upload/documents/Cyrix-230A-(step).STEP) * Automotive Certificate ECE R10.6 (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-Cyrix-ct-12-24V-120A-&-230A.pdf) * Safety Certificate EN-IEC 60335-1 (https://www.victronenergy.com/upload/documents/Safety-EN-IEC-60335-1-Cyrix.pdf) * Cyrix battery combiner Declaration of Conformity (https://www.victronenergy.com/upload/documents/Cyrix-Battery-Combiner-2021-12-29.pdf) Videos * Victron Energy webinar: charging via the alternator (EN) (https://www.youtube.com/watch?v=dzU_pQFa19s) Contact At 230 A, cable cross-section and fuse rating require close attention. Our specialists would be happy to calculate your charging setup with you and help you think through the complete installation. Contact us (https://www.top.systems/nl/contact/) for tailored advice. Specifications Continuous current 230 A Peak current 500 A for 5 seconds Nominal voltage 12 and 24 V, automatic detection Switch-on voltage 13.0 to 13.8 V, or 26.0 to 27.6 V Switch-off voltage 11.0 to 12.8 V, or 22.0 to 25.7 V Switch-on delay 10 minutes at 13.0 to 13.2 V, up to 4 seconds at 13.6 to 13.8 V Switch-off delay 0 seconds to 3 minutes, depending on the voltage Start assist Yes, 30 seconds Status indication LED Control wire included 1 meter Self-consumption closed 320 mA at 12 V, 180 mA at 24 V Self-consumption open Less than 4 mA Operating temperature -40 to +60 °C Protection class IP54 Connection bolts M8 Dimensions 65 x 100 x 50 mm Weight 0.27 kg EAN8719076022213 We would be happy to provide you with more information about this product. Please contact us contact join us.