Victron Cyrix Lithium charge relay 24/48V-230A

Victron Cyrix Lithium charge relay 24/48V-230A

Victron Cyrix Lithium Charge Relay 24/48V-230A Victron Cyrix Lithium Charge Relay 24/48V-230A Applications For 24 and 48 V lithium installations where a battery charger or solar charger must be hard-switched off as soon as the battery management system triggers a cell alarm. This ensures the charge source remains unaffected and the battery bank is reliably protected. Separating the charge source instead of coupling battery banks Where a combiner relay connects two battery banks in parallel, this relay is positioned between the charge source and the LiFePO4 battery bank. It switches the battery charger on and off, controlled by the charge disconnect output of the VE.Bus BMS. For 24 and 48 V systems This is the version for installations exceeding the 12/24 V range. The relay couples as soon as 26.0 V or more is measured at the charger terminal, or 52.0 V for a 48 V system. Switching on The relay connects with a delay of 3 seconds as soon as the charge disconnect output of the VE.Bus BMS is high and the charger terminal reaches the required voltage. Shutdown and restart behavior * Immediate disconnection as soon as the control input becomes free-floating, the signal from the battery management system in case of cell overvoltage or excessive cell temperature * After two pairing attempts with a 3-second interval, the delay increases to 10 minutes Installation * 230 A continuous * Quiescent current less than 4 mA in open state * Protection class IP54 Related products * Victron Cyrix Lithium charge relay 12/24V-230A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-cyrix-lithium-charge-relais-12-24v-230a.html) – CYR010230430 * Victron Cyrix-i intelligent relay 24/48V-400A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-cyrix-i-intelligent-relais-24-48v-400a.html) – CYR020400000 Documentation * Datasheet Cyrix Li-ion series 230A (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Cyrix-Li-ion-230-A-EN.pdf) * Dimensions Cyrix 230A (PDF) (https://www.victronenergy.com/upload/documents/Cyrix-230A.pdf) * Dimensions Cyrix 230A (STEP file) (https://www.victronenergy.com/upload/documents/Cyrix-230A-(step).STEP) * Safety Certificate EN-IEC 60335-1 (https://www.victronenergy.com/upload/documents/Safety-EN-IEC-60335-1-Cyrix.pdf) * Declaration of Conformity Cyrix battery combiner (https://www.victronenergy.com/upload/documents/Cyrix-Battery-Combiner-2021-12-29.pdf) * Manual (PDF) (https://shop.top.systems/_clientfiles/Documents/Manuals/CYR020230430_Victron-Cyrix-Lithium-charge-relais-24-48V-230a.pdf) Videos * Victron Energy webinar: charging via the alternator and lithium batteries (EN) (https://www.youtube.com/watch?v=dzU_pQFa19s) Contact For 48 V lithium installations, the connection to the VE.Bus BMS, the cable cross-section, and the fuse rating require close attention. Our specialists would be happy to assist you. Contact us (https://www.top.systems/nl/contact/) for tailored advice. Specifications Continuous current 230 A Nominal voltage 24 and 48 V Battery type LiFePO4 Function Isolation from the charging source Control input Charge disconnect output VE.Bus BMS Charger terminal switch-on voltage From 26.0 V, or from 52.0 V Switch-on delay 3 seconds, 10 minutes after two attempts Disconnection on cell alarm Immediate, with free-floating control input Open-circuit self-consumption Less than 4 mA Protection class IP54 Dimensions 65 x 100 x 50 mm Weight 0.27 kg EAN 8719076022282 We would be happy to provide you with more information about this product. Please contact us contact join us.