Victron Cyrix Lithium intelligent relay ct 12/24V-230A

Available for backorder

Original price was: €209.33.Current price is: €177.93.

Victron Cyrix Lithium intelligent relay CT 12/24V-230A – We'd be happy to provide you with more information about this product. Please contact us.

SKU: CYR010230412 Categories: , , Brand: Brand:
CYR010230412

Available for backorder

Victron Cyrix Lithium intelligent relay ct 12/24V-230A

Victron Cyrix Lithium intelligent relay ct 12/24V-230A Victron Cyrix Lithium intelligent relay ct 12/24V-230A Applications For yachts and commercial vehicles with a heavier alternator and a lithium service battery bank alongside a lead-acid starter battery. The relay only connects when the battery management system allows it and disconnects immediately in the event of a cell alarm. Specifically for LiFePO4 This microprocessor-controlled relay is designed to connect a lead-acid starter battery in parallel with a LiFePO4 battery bank. The control input is driven by the VE.Bus BMS, ensuring the relay never connects when the battery management system does not allow it. Connection The relay connects as soon as the charge disconnection output of the VE.Bus BMS is high AND 13.4 V or more is measured at one of the terminals, or 26.8 V for a 24 V system. The delay depends on the measured voltage: * 13.4 to 13.7 V, or 26.8 to 27.4 V: 120 seconds * 13.7 to 13.9 V, or 27.4 to 27.8 V: 30 seconds * Above 13.9 V, or above 27.8 V: 4 seconds Disconnecting The relay disconnects immediately as soon as the control input becomes floating freely. This is the signal from the battery management system in case of cell overvoltage or excessive cell temperature. Additionally, it switches off based on the voltage: * 13.3 to 13.2 V, or 26.6 to 26.4 V: after 10 seconds * Below 13.2 V, or below 26.4 V: immediately LED status indication and control wire An LED displays the operating status, so that you can immediately see whether the battery banks are connected during commissioning and troubleshooting. A 1-meter control wire is included. Installation * 230 A continuous at 12 or 24 V * Quiescent current less than 4 mA in open state * Protection class IP54 Related products * Victron Cyrix-Li-ct 12/24-120A combiner (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-cyrix-li-ct-12-24-120a-combiner.html) – CYR010120412 * Victron Cyrix Lithium charge relay 12/24V-230A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-cyrix-lithium-charge-relais-12-24v-230a.html) – CYR010230430 Documentation * Datasheet Cyrix Li-ion series 230A (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Cyrix-Li-ion-230-A-EN.pdf) * Cyrix 230A Dimensions (PDF) (https://www.victronenergy.com/upload/documents/Cyrix-230A.pdf) * Cyrix 230A Dimensions (STEP file) (https://www.victronenergy.com/upload/documents/Cyrix-230A-(step).STEP) * Safety Certificate EN-IEC 60335-1 (https://www.victronenergy.com/upload/documents/Safety-EN-IEC-60335-1-Cyrix.pdf) * Cyrix Battery Combiner Declaration of Conformity (https://www.victronenergy.com/upload/documents/Cyrix-Battery-Combiner-2021-12-29.pdf) * Manual (PDF) (https://shop.top.systems/_clientfiles/Documents/Manuals/CYR010230412_Victron-Cyrix-Lithium-intelligent-relais-ct-12-24V-230a.pdf) Videos * Victron Energy webinar: charging via the alternator and lithium batteries (EN) (https://www.youtube.com/watch?v=dzU_pQFa19s) Contact At 230 A, cable cross-section and fuse rating are critical, and the connection to your VE.Bus BMS must be correct. Our specialists would be happy to review the complete lithium system with you. Contact us (https://www.top.systems/nl/contact/) for tailored advice. Specifications Continuous current 230 A Nominal voltage 12 and 24 V Battery type LiFePO4 in combination with a lead-acid starter battery Control input Charge disconnect output VE.Bus BMS Coupling voltage From 13.4 V, or from 26.8 V Coupling delay 120 seconds, 30 seconds or 4 seconds, depending on the voltage Disconnection voltage Below 13.2 V, or below 26.4 V Disconnection on cell alarm Direct, with free-floating control input Status indication LED Control wire included 1 meter Own consumption open Less than 4 mA Protection class IP54 Dimensions 65 x 100 x 50 mm Weight 0.27 kg EAN 8719076034346 We would be happy to provide you with more information about this product. Please contact us contact join us.
an electric sloop? See our full range.