Victron Cyrix-Lithium load relay 12/24V-230A

Victron Cyrix-Lithium load relay 12/24V-230A

Victron Cyrix-Lithium Load Relay 12/24V-230A Victron Cyrix-Lithium Load Relay 12/24V-230A Applications For heavier lithium installations where consumers must be hard-off as soon as the battery management system threatens deep discharge. This keeps the battery bank within its safe window, even in unattended installations. Separating consumers, not charge sources This relay is located between the LiFePO4 battery bank and the consumers. It is controlled by the load disconnect output of the VE.Bus BMS and disconnects the load as soon as that signal drops. This makes it the counterpart to the charge relay, which disconnects the charge source. Disconnection The relay drops out as soon as the control input becomes floating freely, the signal from the battery management system when the cell voltage is too low. Additionally, it switches off based on battery voltage: * Between 11.5 and 11.0 V: after 10 seconds * Below 10.5 V: immediately Automatic restart If the battery voltage recovers after the load has been switched off, the BMS output goes high again and the relay re-engages after 30 seconds. After three failed attempts, it remains switched off until the battery voltage is above 13 V or 26 V for at least 30 seconds, indicating that the battery bank is actually being charged. Installation * 230 A continuous * Quiescent current less than 4 mA in open state * Protection class IP54 Related products * Victron Cyrix Lithium load relay 12/24V-120A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-cyrix-lithium-load-relais-12-24v-120a.html) – CYR010120450 * Victron Cyrix Lithium charge relay 12/24V-230A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-cyrix-lithium-charge-relais-12-24v-230a.html) – CYR010230430 * Victron Cyrix Lithium intelligent relay CT 12/24V-230A (https://shop.top.systems/omvormen-laden/laadstroomverdelers/victron-cyrix-lithium-intelligent-relais-ct-12-24v-230a.html) – CYR010230412 Documentation * Datasheet Cyrix Li-ion series 230A (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Cyrix-Li-ion-230-A-EN.pdf) * Dimensions Cyrix 230A (PDF) (https://www.victronenergy.com/upload/documents/Cyrix-230A.pdf) * Dimensions Cyrix 230A (STEP file) (https://www.victronenergy.com/upload/documents/Cyrix-230A-(step).STEP) * Safety Certificate EN-IEC 60335-1 (https://www.victronenergy.com/upload/documents/Safety-EN-IEC-60335-1-Cyrix.pdf) * Cyrix battery combiner declaration of conformity (https://www.victronenergy.com/upload/documents/Cyrix-Battery-Combiner-2021-12-29.pdf) * Manual (PDF) (https://shop.top.systems/_clientfiles/Documents/Manuals/CYR010230450_Victron-Cyrix-Lithium-load-relais-12-24V-230a.pdf) Videos * Victron Energy webinar: charging via the alternator and lithium batteries (EN) (https://www.youtube.com/watch?v=dzU_pQFa19s) Contact At 230 A, pay close attention to cable cross-section and fuse rating, and the connection to your VE.Bus BMS must be correct. Our specialists would be happy to review the complete lithium system with you. Please contact us (https://www.top.systems/nl/contact/) for tailored advice. Specifications Continuous current 230 A Nominal voltage 12 and 24 V Battery type LiFePO4 Function Consumer isolation Control input Load disconnect output VE.Bus BMS Disconnection on cell alarm Immediate, with free-floating control input Disconnection voltage at 12 V 11.5 to 11.0 V after 10 seconds, below 10.5 V immediately Restart After 30 seconds, after three attempts only above 13 V or 26 V for 30 seconds Auto-consumption open Less than 4 mA Protection class IP54 Dimensions 65 x 100 x 50 mm Weight 0.27 kg EAN 8719076022244 We would be happy to provide you with more information about this product. Please contact us contact join us.