Victron DIN35 rail adapter large (2pcs)

Victron DIN35 rail adapter large (2pcs)

Victron DIN35 Rail Adapter Large (2 pcs) Victron DIN35 Adapter Large Adapter set from Victron Energy that allows a device to be mounted on a standard DIN35 rail instead of against a wall or panel. This is the largest of the three available sizes, intended for devices with the widest hole spacing on the rear. The adapters are secured with M4 screws and then click onto the rail. Supplied as a pair. Applications The larger the device, the further apart the mounting holes are — and a smaller adapter falls short in that case. This version bridges the widest hole spacing in the range, allowing even bulky components to be mounted on the rail instead of against the cabinet wall. Neatly aligned, removable, and without having to make your own brackets. * Switch cabinets and distribution boards in ESS and off-grid installations * Technical rooms where everything is built on a rail * Commercial vehicles and marine installations with a DIN rail in the service cabinet * Installations that need to be expandable or rearranged later Size Selection The decisive factor is the distance between the screw holes on the rear of the device. This version has screw positions at 77, 90, and 105 mm. Compare these with your device before ordering; the dimensioning drawing below shows the exact positions. For smaller hole spacings, the small and medium versions are available. Mounting is done using M4x14 screws on the back of the device, after which the entire unit clicks onto the DIN35 rail. Due to the narrow design, the set takes up hardly any rail width. Documentation * Dimensioning drawing (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-DIN-35-adapter-large.pdf) * 3D Dimensioning (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-DIN-35-adapter-large-3D.pdf) * 3D model (STEP) (https://www.victronenergy.com/upload/documents/DimensionDrawing-DIN-35-adapter-large-3D.STEP) * Drawing (DWG) (https://www.victronenergy.com/upload/documents/DimensionDrawing-DIN-35-adapter-large.DWG) * Victron Energy ISO 9001 certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Victron Energy does not publish a manual, datasheet, or Dutch-language documentation for this article; only the dimension drawings and the ISO 9001 certificate are available. Contact Not sure which of the three sizes fits your device? Send us the model, and we will find out for you. Contact us (https://www.top.systems/nl/contact/). Specifications Application Mounting of a Victron device on a DIN35 rail Dimensions per adapter (hxwxd) 105 x 12.5 x 11 mm Screw positions 77, 90, and 105 mm Mounting M4x14 screws Scope of delivery 2 adapters Manufacturer Victron Energy Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.