Victron DIN35 rail adapter medium (2 pcs)

Victron DIN35 rail adapter medium (2 pcs)

Victron DIN35 Rail Adapter Medium (2 pcs) Victron DIN35 Adapter Medium Adapter set from Victron Energy that allows a device to be mounted on a standard DIN35 rail instead of against a wall or panel. This is the middle of the three available sizes; the size determines the hole spacing on the back of the device that the adapter fits into. The adapters are secured with M4 screws and then click onto the rail. Supplied as a pair. Applications A DIN rail is the standard mounting surface in most control cabinets — but the device must fit on it. This size bridges the hole spacings for which the small version is too short, allowing you to neatly mount larger Victron components on the rail as well. Removable, aligned with the rest of the cabinet, and without its own brackets. * Switchgear and distribution boards in ESS and off-grid installations * Technical rooms where everything is mounted on a rail * Commercial vehicles and marine installations with a DIN rail in the service cabinet * Installations that need to be expandable or rearranged at a later stage Size Selection The decisive factor is the distance between the screw holes on the back of the device. This version has screw positions at 64.5, 77.5, and 92.5 mm. Compare these with your device before ordering; the dimensioning drawing below shows the exact positions. The small and large versions are available for smaller and larger hole spacings. Mounting Mounting is done with M4x14 screws on the back of the device, after which the entire unit clicks onto the DIN35 rail. Due to the narrow design, the set takes up hardly any rail width. Documentation * Dimensioning drawing (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-DIN-35-adapter-medium.pdf) * 3D Dimensioning (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-DIN-35-adapter-medium-3D.pdf) * 3D model (STEP) (https://www.victronenergy.com/upload/documents/DimensionDrawing-DIN-35-adapter-medium-3D.STEP) * Drawing (DWG) (https://www.victronenergy.com/upload/documents/DimensionDrawing-DIN-35-adapter-medium.DWG) * Victron Energy ISO 9001 certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Victron Energy does not publish a manual, datasheet, or Dutch-language documentation for this item; only the dimension drawings and the ISO 9001 certificate are available. Contact Not sure which of the three sizes fits your device? Send us the model, and we will find out for you. Contact us (https://www.top.systems/nl/contact/). Specifications Application Mounting of a Victron device on a DIN35 rail Dimensions per adapter (hxwxd) 92.5 x 12.5 x 11 mm Screw positions 64.5, 77.5, and 92.5 mm Mounting M4x14 screws Scope of delivery 2 adapters Manufacturer Victron Energy Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.