Victron EasySolar 12/1600/70-16 MPPT 100/50
Victron EasySolar 12/1600/70-16 MPPT 100/50 For a complete power supply in vessels, vehicles, industrial and infrastructure applications with a 12V battery bank, such as a motorhome, a sloop, or a construction site office. The inverter-charger, solar controller, and AC distribution with RCD are housed in a single enclosure, with the battery cables already installed. Also known as EasySolar 12/1600. Battery voltage Suitable for 12V battery banks, with a DC input range of 9.5V to 17V. The output delivers 230 VAC ±2% at 50 Hz ±0.1%, adjustable to 240V and 60 Hz. Power Continuous 1300W at 25°C and 1200W at 40°C; nominal 1600VA. Peak power 3000W. Maximum efficiency 92%. No-load power 8W, 2W in search mode. The automatic transfer switch handles a maximum of 16A; PowerControl and PowerAssist limit the mains current and supplement any deficit from the battery. Battery charger: Charging current 70A for the house battery bank and 4A for a starter battery. Adaptive charging characteristic with charging voltages of 14.4V absorption, 13.8V trickle, and 13.2V storage. The battery temperature sensor is included. MPPT: Built-in MPPT 100/50 with a charging current of up to 50A, maximum PV no-load voltage of 100V, and a self-consumption of 10 mA. The controller starts at a PV voltage of 5V above the battery voltage and continues to operate down to 1V above the battery voltage. Temperature compensation -16 mV/°C. The panels are connected to three sets of MC4 connectors. Connectable Remote control via a Digital Multi Control, the VE.Bus Smart dongle, or a GX device such as the Cerbo GX. The inverter-charger has two RJ45 VE.Bus ports, the solar controller one VE.Direct port. Construction Blue aluminum housing (RAL 5012), protection class IP21, fan-cooled, operating temperature -20 to +50 °C and maximum 95% humidity. A single housing contains a MultiPlus Compact inverter-charger, an MPPT solar controller, and an AC distribution unit with RCD. Installation The 1.5 m (35mm²) battery cables are pre-installed. For longer cables, Victron recommends 70mm² for up to 5 m or 140mm² for 5 to 10 m; protect the DC and AC input cables. The 230V input is via a G-ST18i connector with a flexible 2.5mm² three-core cable. Communication via VE.Bus for the inverter-charger and VE.Direct for the solar controller. Monitoring via the VRM Portal – Victron Energy (https://vrm.victronenergy.com/login) using a GX device. A programmable relay can be configured as an alarm, undervoltage notification, or generator start. General The AC distribution features a 30 mA / 16A RCD and four outputs with 2 x 10A and 2 x 16A circuit breakers. Output AC0 (16A) is only energized during mains voltage; the other three outputs remain powered by the inverter in the event of a power outage. Included Device with pre-mounted 1.5 m battery cables and battery temperature sensor. Can be ordered directly * Red battery cable 70mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-rood-70mm-per-meter.html), KABRD0107000 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Black battery cable 70mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-zwart-70mm-per-meter.html), KABZW0107000 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Crimp cable lug 70mm² > M8 (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/perskabeloog-70mm-m8.html), PSKABOG00071 (category Crimp cable lugs (https://shop.top.systems/installation/accessories-cables/press-cable-eyes/)) * MEGA-fuse fuse holder 2xM8 (https://shop.top.systems/beveiligen- Schakelen/zekeringhouders/mega-fuse-fusehouder2xm8.html), ZEKHD0000200 (category Fuse Holders (https://shop.top.systems/beveiligen- Schakelen/fusehouders/)) * Victron VE.Bus Smart dongle (https://shop.top.systems/monitoring-control/draadloos/victron-ve-bus-smart-dongle.html), ASS030537010 * Victron interface MK3-USB (VE.Bus to USB) (https://shop.top.systems/installation/interface/victron-interface-mk3-usb-ve-bus-to-usb.html), ASS030140000-C * Victron Digital Multi Control 200/200A (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a.html), REC020005010 (category Control panels (https://shop.top.systems/monitoring-control/controlpanels/)) * Victron Digital Multi Control 200/200A GX (90º) (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a-gx-90.html), DMC000200010R (category Control panels (https://shop.top.systems/monitoring-control/controlpanels/)) * Victron Cerbo GX MK2 (https://shop.top.systems/monitoring-control/controlpanelen/victron-cerbo-gx-mk2.html), BPP900451100 (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * Solar cable 6mm² 5 meters MC4 male/female (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=SCA000500100), SCA000500100 (category Solar panel accessories (https://shop.top.systems/zonnestroom/accessoires-zonnepanelen/)) * TS Enovations IMD3+ Insulation monitor (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/ts-enovations-imd3-isolatiebewaker.html), SHP302501460 (category Insulation monitors (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/)) Documentation * EasySolar Datasheet 12V and 24V 1600VA (NL) (https://www.victronenergy.com/upload/documents/Datasheet-EasySolar-1600VA-NL.pdf) * Datasheet EasySolar 12V and 24V 1600VA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-EasySolar-1600VA-EN.pdf) * Manual EasySolar 1600 (multilingual, incl. NL and EN) (https://www.victronenergy.com/upload/documents/Manual-EasySolar-1600-EN-NL-FR-DE-ES-IT.pdf) * Dimensions EasySolar 12V 1600VA 70A MPPT 100/50 (https://www.victronenergy.com/upload/documents/EasySolar-12V-1600VA-70AMP-MPPT-100-50.pdf) * Victron Energy ISO 9001 certificate (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Question & Answer Does the combination also charge the starter battery? Yes, the charger has a 4A starter battery output, which charges as long as there is mains voltage. Why does the RCD trip with a heavy load? The built-in RCD is 30 mA / 16A. Check the AC outputs one by one to find the cause. What does an overload alarm mean? The load is too high; reduce it. After a shutdown, the alarm LED remains lit until the inverter is restarted. Does the EasySolar have an ECE R10 certificate? Victron refers to Directive 2004/104/EC and does not publish an ECE R10 certificate for the EasySolar. Contact Would you like to know how to install the EasySolar in a vehicle or vessel, or which panels are compatible? Feel free to contact us; we are happy to help you think about your system. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Battery voltage 12V DC input range 9.5-17V Nominal power 1600VA Continuous power 25 °C / 40 °C 1300W / 1200W Peak power 3000W Maximum efficiency 92% No-load power / search mode 8W / 2W Automatic transfer switch 16A PowerControl / PowerAssist Yes / Yes Charging current house battery / starter battery 70A / 4A Charging voltage absorption / trickle / storage 14.4V / 13.8V / 13.2V Solar controller MPPT 100/50 Solar controller charging current 50A Maximum PV no-load voltage 100V PV connection Three sets MC4 AC distribution RCD 30 mA / 16A, 2x 10A and 2x 16A Communication VE.Bus (2x RJ45), VE.Direct Battery cables 1.5 m, 35mm², assembled Battery cable 1.5-5 m / 5-10 m 70mm² / 140mm² AC input G-ST18i connector Battery temperature sensor Included Housing Aluminum, blue RAL 5012 Protection class IP21 Operating temperature -20 to +50 °C, fan-cooled Standards EN 60335-1, EN 60335-2-29, EN 62109 Warranty 5 years EAN 8719076065012 We would be happy to provide you with more information about this product. Please contact us
contact join us.