Victron EasySolar-II 48/4k5/55-32 MPPT 250/70 GX
Victron EasySolar-II 48/4k5/55-32 MPPT 250/70 GX For solar energy storage in homes, off-grid living, commercial buildings, and drives with a 48V battery bank, where 4000W continuous and up to 6kW momentarily are required. The built-in MPPT handles 4000Wp, and the GX manages ESS and monitoring without an additional device. In the event of a grid failure, the inverter takes over the power supply. Also known as EasySolar-II 48/4500. Battery voltage Suitable for 48V battery banks, with a DC input range of 38V to 60V. The output delivers 230 VAC ±2% at 50 Hz ±0.1%, adjustable to 60 Hz. Continuous power 4000W at 25°C, 3700W at 40 and 55°C, and 3000W at 65°C. Momentary 4.5kW for 2 hours and 6kW for 25 minutes from a cold start. Peak power 7kW for 1 minute. Maximum efficiency 95%. The automatic transfer switch handles a maximum of 32A; PowerControl and PowerAssist limit the mains current and supplement any deficit from the battery. Battery charger Mains charging current 55A (50A at 40°C) down to 25°C. Adaptive charging characteristic with charging voltages 57.6V absorption, 55.2V trickle. A battery temperature sensor is optional (ASS000001000) and is not included with 48V. MPPT Built-in SmartSolar MPPT 250/70-Tr with a charging current of up to 70-TrA and a maximum of 4000Wp of solar panels. Maximum PV open-circuit voltage 250V and maximum short-circuit current 35A. The controller starts at a PV voltage of 5V above the battery voltage and continues to operate until 1V above the battery voltage. The PV field is connected using M6 bolts. Connectable: Up to six units in parallel, and six per phase in a three-phase configuration, eighteen in total. One GX device is permitted per system: the remaining units are identical MultiPlus-IIs, and when a second EasySolar-II GX is installed, the internal GX is disconnected. Remote control via a Digital Multi Control, the VE.Bus Smart dongle, or the built-in GX. Construction: Steel housing, IP21 protection rating, fan-cooled; maximum 95% humidity and 2000 m altitude. A single enclosure houses a MultiPlus-II inverter-charger, a SmartSolar MPPT solar controller, and a GX device with a display. Installation: Victron recommends an 180A DC fuse and 50mm² battery cable for cable lengths up to 5 m, or 70mm² for 5 to 10 m. Connect the battery to M8 bolts, the PV cables to M6 bolts, and the AC cables to screw terminals. Use an additional earth cable of at least 10mm² and a voltage detection cable of 0.75mm². Communication: The built-in GX features BMS-CAN (500 kbps) for compatible CAN batteries, USB, Ethernet, VE.Direct, and Wi-Fi, with monitoring via the VRM Portal – Victron Energy (https://vrm.victronenergy.com/login). The inverter-charger communicates via VE.Bus with two RJ45 ports. Furthermore, it features a programmable relay (230V/4A AC, 4A up to 35 VDC, 1A up to 60 VDC), two auxiliary inputs, and remote on/off. Generally, AC-out-1 is continuous: in the event of a mains failure, the inverter takes over the power supply. AC-out-2 is a 32A auxiliary output that switches off during battery operation and switches back on when the mains voltage returns. With the built-in GX and an optional external 100A current sensor, the combination operates as an ESS with grid connection. Can be ordered directly * Red battery cable 50mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABRD0105000), KABRD0105000 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Black battery cable 50mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KABZW0105000), KABZW0105000 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Crimp cable lug 50mm² > M8 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=PSKABOG00051), PSKABOG00051 (category Crimp lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/)) * Cable set 50mm² 1.5 m red and black M8-M8 (https://shop.top.systems/installatie/kabels/accu/kabelset-50mm-1-5-mtr-rood-en-zwart-m8-m8.html), KABSET010501 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Mega fuse holder M8 35-300A (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/mega-zekeringhouder-m8-35-300a.html), ZEKHD0000800 (category Fuse holders (https://shop.top.systems/beveiligen- Schakelen/fusehouders/)) * Victron VE.Bus Smart dongle (https://shop.top.systems/monitoring-control/draadloos/victron-ve-bus-smart-dongle.html), ASS030537010 * Victron interface MK3-USB (VE.Bus to USB) (https://shop.top.systems/installation/interface/victron-interface-mk3-usb-ve-bus-to-usb.html), ASS030140000-C * Victron Digital Multi Control 200/200A (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a.html), REC020005010 (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * Victron Digital Multi Control 200/200A GX (90º) (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-digital-multi-control-200-200a-gx-90.html), DMC000200010R (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * Solar cable 6mm² 5 meters MC4 male/female (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=SCA000500100), SCA000500100 (category Solar panel accessories (https://shop.top.systems/zonnestroom/accessoires-zonnepanelen/)) Related products * Victron EasySolar-II 48/5000/70-50 MPPT 250/100 GX (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-easysolar-ii-48-5000-70-50-mppt-250-100-gx.html), PMP482507010 * Victron EasySolar-II 48/6k5/100-50 MPPT 250/100 GX (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-easysolar-ii-48-6k5-100-50-mppt-250-100-gx.html), PMP482657010 * Victron EasySolar-II 48/3000/35-32 MPPT 250/70 GX (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/victron-easysolar-ii-48-3000-35-32-mppt-250-70-gx.html), PMP482307010 Documentation * Datasheet EasySolar-II GX 48V 4k5 and 6k5 (NL) (https://www.victronenergy.com/upload/documents/Datasheet-EasySolar-II-GX-48V-4k5–6k5-NL.pdf) * Datasheet EasySolar-II GX 48V 4k5 and 6k5 (EN) (https://www.victronenergy.com/upload/documents/Datasheet-EasySolar-II-48V-4k5–6k5-GX-EN.pdf) * Manual EasySolar-II GX 4k5 and 6k5 (NL) (https://www.victronenergy.com/upload/documents/EasySolar-II_GX_4k5_6k5/11230-EasySolar-II_GX-pdf-nl.pdf) * EasySolar-II GX 4k5 and 6k5 Manual (EN) (https://www.victronenergy.com/upload/documents/EasySolar-II_GX_4k5_6k5/11230-EasySolar-II_GX-pdf-en.pdf) * EasySolar-II GX 4k5 and 6k5 Online Manual (NL) (https://www.victronenergy.com/media/pg/EasySolar-II_GX_4k5_6k5/nl/index-nl.html) * EasySolar-II GX 4k5 and 6k5 Online Manual (EN) (https://www.victronenergy.com/media/pg/EasySolar-II_GX_4k5_6k5/en/index-en.html) * EasySolar-II 4k5 Dimensions (https://www.victronenergy.com/upload/documents/DimensionDrawing-4k5W-EasySolar-II.pdf) * Victron Energy ISO 9001 Certificate (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Q&A Which batteries communicate via the BMS CAN port? Compatible CAN batteries at 500 kbps. Consult the Victron compatibility list for the battery you wish to use. How do I protect and ground the PV field and the battery? Keep the PV open-circuit voltage below 250V and the short-circuit current below 35A. Protect the battery with 180A and use an additional earth cable of at least 10mm². Can I expand the system with additional devices? Yes, with identical MultiPlus-IIs: up to six in parallel and six per phase in three-phase. One GX device is allowed per system. Why does an additional MultiPlus-II not communicate? The devices must be identical and have the same firmware. UTP cables run directly from device to device. Does the device have a second AC output? Yes, AC-out-2 for consumers that may switch off in the event of a power outage, such as a boiler. Contact Would you like to know which battery, PV configuration, or ESS setting suits your installation? Feel free to contact us; we are happy to help you think about your system. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Battery voltage 48V DC input range 38-60V Continuous power 25 °C 4000W Continuous power 40 °C 3700W Continuous power 65 °C 3000W Impact output 4.5kW for 2 hours and 6kW for 25 minutes from cold start Peak power 7kW for 1 minute Maximum efficiency 95% Automatic transfer switch 32A AC-out-232A, only at mains voltage PowerControl / PowerAssist Yes / Yes Charging current from mains 55A (50A at 40 °C) Charging voltage absorption / trickle 57.6V / 55.2V Battery temperature sensor Optional, ASS000001000 Solar controller SmartSolar MPPT 250/70-Tr Maximum PV power 4000Wp Maximum PV open-circuit voltage 250V Maximum PV short-circuit current 35A GX interfaces BMS - Can, USB, Ethernet, VE.Direct, Wi-Fi, display Communication inverter VE.Bus, 2x RJ45 Programmable relay 230V/4A AC, 4A up to 35 VDC, 1A up to 60 VDC Parallel / three-phase Up to 6 in parallel, 6 per phase, 18 in total Recommended DC fuse 180A Battery cable 0-5 m / 5-10 m 50mm² / 70mm² Battery connection M8 bolts PV connection M6 bolts Housing steel, blue RAL 5012 Protection class IP21 Dimensions (hxwxd) 591 x 275 x 254 mm Standards EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 Warranty 5 years EAN 8719076073970 We are happy to assist you more information about this product. Please
contact join us.