Victron Ekrano GX
Victron Ekrano GX Victron Ekrano GX The Ekrano GX is Victron Energy's most powerful GX device: a full-fledged communication center with a built-in 7-inch touchscreen in a single aluminum housing. The device runs Venus OS, connects all Victron components and a growing list of third-party equipment, and is accessible via the screen itself, the VRM portal, an MFD, or the VictronConnect app. The Ekrano GX is the successor to the Color Control GX. Applications One item instead of a separate GX controller plus display: this saves installation space, cabling, and mounting time, and results in a sleeker panel. The quad-core processor also keeps large systems with extensive VE.Direct, VE.Can, and VE.Bus equipment running smoothly. From a single camper facility to a multi-phase ESS installation: this is the control heart of the system. * ESS and home battery: scheduled charging, peak shaving, and solar forecasts via VRM * Off-grid and backup: automatic generator start/stop with silent periods * Marine: integration with MFDs, Signal K, and NMEA 2000 * Motorhome, commercial vehicle, and emergency vehicle * Hybrid generators and remote management of large numbers of systems Built-in 7-inch touchscreen Resolution 1024 x 600 pixels with a maximum brightness of 1000 cd/m². The backlight dims automatically via the built-in ambient light sensor or manually via the Remote Console, with a timer for automatic switching on and off. A dark display mode is available for use in the dark. Touch control can be disabled You can switch touch control off or on again with a recessed button on the back. This allows the screen to be positioned visibly without unauthorized persons being able to change settings; operation with keyboard input remains possible via the Remote Console. Connections and interfaces * 3x VE.Direct (always isolated), up to 25 VE.Direct devices in total * 1x VE.Bus with two parallel-connected RJ45 sockets (isolated) * 2x VE.Can: one isolated, one non-isolated * Ethernet, WiFi (including access point) and Bluetooth Smart * 2x USB-A host ports, combined maximum 1.5 A at 5 V * MicroSD card slot, SDHC up to 32 GB * 2x relays NO/NC, 3 A up to 30 VDC or 1 A at 125 VAC * 3 resistive tank level inputs, 2 temperature inputs, 2 digital inputs The digital inputs are suitable for open/close monitoring of, for example, door, fire, or lens alarms, as well as for pulse counting. The tank inputs can be individually configured for European transmitters (0 – 180 Ω) or American transmitters (240 – 30 Ω). Tank senders and temperature sensors are not included. Monitoring and control: Battery status, consumption, PV yield, generator and grid power, tank levels, and temperatures in a single overview. Set the shore power limit, automatically start or stop generators, or adjust arbitrary settings. Alarms and notifications are fully configurable. Via the Remote Console on the VRM, you operate the device remotely as if you were standing in front of it — even over the local network or via the built-in WiFi access point. In the event of a lost internet connection, data remains logged locally. Integrations: * VRM portal with widgets for iOS and Android, custom data windows, and alarms * Marine MFD app and NMEA 2000 integration * Node-RED automation via Venus OS Large * Deep integration with supported third-party lithium batteries * Modbus-TCP and MQTT for connection with external systems Mounting: The Ekrano GX is optimized for flush panel mounting. Included are a steel bracket with threaded studs and wing nuts for rear mounting, and springs for fully front mounting when the rear is inaccessible. All ports remain accessible from the rear; power and relay terminals are screwable, and the IO terminal block features a quick connector. When mounted with the steel bracket, the front is protected to IP54. With the springs, this is IP31. The rear is IP21. Documentation * Ekrano GX Manual (NL, HTML5) (https://www.victronenergy.com/media/pg/Ekrano_GX/nl/index-nl.html) * Ekrano GX Manual (EN, HTML5) (https://www.victronenergy.com/media/pg/Ekrano_GX/en/index-en.html) * Ekrano GX Manual (EN, PDF) (https://www.victronenergy.com/upload/documents/Ekrano_GX/140558-Ekrano_GX__Venus_GX__Cerbo_GX__Cerbo-S_GX_Manual-pdf-en.pdf) * Ekrano GX Datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-Ekrano-GX-EN.pdf) * Dimensioning Drawing (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-Ekrano-GX.pdf) * Cutout drawing (PDF) (https://www.victronenergy.com/upload/documents/Cut-Out-Drawing-Ekrano-GX.pdf) * 3D dimensioning (PDF) (https://www.victronenergy.com/upload/documents/DimensionDrawing-Ekrano-GX-3D.pdf) * 3D model (STEP) (https://www.victronenergy.com/upload/documents/DimensionDrawing-Ekrano-GX-3D.STEP) * EU Declaration of Conformity – GX devices (PDF) (https://www.victronenergy.com/upload/documents/GX-devices-Cerbo-Ekrano-Color-Control-Venus-Octo-EU-DOC-RED.pdf) * Certificate IEC 62368-1 (PDF) (https://www.victronenergy.com/upload/documents/Certificate-IEC-62368-1-Ekrano-GX.pdf) * ECE R10-6 Automotive Certificate (PDF) (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-Ekrano-GX.pdf) * Victron Energy ISO 9001 Certificate (PDF) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) * Victron GX Product Range – Venus OS Documentation (EN) (https://www.victronenergy.com/live/venus-os:start) The manual is available in Dutch; Victron Energy publishes the datasheet and certificates exclusively in English. Contact Are you unsure whether to choose the Ekrano GX or a separate GX controller with display, or would you like to have the system configuration calculated for ESS, marine, or off-grid applications? Our specialists are happy to assist you with configuration, cabling, and installation. Please contact us (https://www.top.systems/nl/contact/). Specifications Display 7-inch touchscreen, 1024 x 600 pixels Max. brightness 1000 cd/m² Supply voltage 8 – 70 VDC Power consumption, display on (100%) 6.2 W at 12 V | 6.6 W at 24 V | 7.4 W at 48 V Power consumption, display off 2.6 W at 12 V | 3.0 W at 24 V | 3.7 W at 48 V VE.Direct3 ports, isolated (max. 25 VE.Direct devices) VE.Bus1 bus, 2 parallel RJ45 sockets, isolated VE.Can1x isolated, 1x non-isolated NetworkEthernet, WiFi, Bluetooth Smart USB2x USB-A host, total max. 1.5 A at 5 V MicroSDSDHC up to 32 GB Relays2x NO/NC – 3 A up to 30 VDC | 1 A at 125 VAC Tank level inputs3, resistive (0 – 180 Ω or 240 – 30 Ω) Temperature inputs2 Digital inputs2, including pulse counting Dimensions (hxwxd)124 x 187 x 29.8 mm, without connectors and mounting material Protection degreeFront IP54 with steel bracket, IP31 with springs; Rear IP21 Operating temperature -20 to +50 °C Housing Aluminium Mounting Flush-mounted or blind-hole mounting, mounting material included Buzzer Yes Safety IEC 62368-1 EMCEN 301489-1, EN 301489-17 Automotive ECE R10-6 Warranty 5 years We would be happy to provide you with more information about this product. Please contact us
contact join us.
