Victron Inverter 12/1600 Compact

Available for backorder

Original price was: €711.48.Current price is: € 604.76.

Victron Inverter 12/1600 Compact – We would be happy to provide you with more information about this product. Please contact us.

CIN122160000

Available for backorder

Victron Inverter 12/1600 Compact

Victron Inverter 12/1600 Compact For 230V consumers up to 1300W continuous in vessels, vehicles, industrial and infrastructure applications with a 12V battery bank, such as a coffee maker, power tools, or a compressor refrigerator. With a 3000W peak, the inverter captures motor starting currents. The system can be expanded and monitored via VE.Bus using a GX device. Battery voltage Suitable for 12V battery banks, with a DC input range of 9.5-17V. The output delivers 230 VAC ±2% ​​at 50 Hz ±0.1%; the voltage is adjustable between 210 and 245V and the frequency can be switched to 60 Hz. Pure sine wave. Power Continuous 1300W at 25 °C, 1200W at 40 °C and 800W at 65 °C; Nominal 1600VA at a non-linear load with a crest factor of 3:1. Peak power 3000W. Maximum efficiency 92%. No-load power 8W, 5W in AES mode, and 2W in search mode. Connectable: Up to six identical devices in parallel, using DC cables of equal length and cross-section and UTP cables directly from device to device; a splitter is not permitted. Three-phase only in star configuration, not in delta. Up to three devices are configured using VE.Bus Quick Configure; from four devices using VE.Bus System Configurator. Search and AES modes only work with a device operating independently. Remote control via the Phoenix Inverter Control, a Digital Multi Control, or a GX device; only one remote control may be connected at a time. Construction: Aluminum housing in blue (RAL 5012), protection class IP21, fan cooling, operating temperature -40 to +65 °C. Protected against output short circuit, overload, excessive and insufficient battery voltage, excessive temperature, 230 VAC on the output, and excessive input ripple voltage. Reverse polarity of the battery may damage the internal fuse. Mounting: Leave at least 10 cm of clearance around the unit for cooling. The 1.5 m (35mm²) battery cables are permanently attached to the unit. For cable lengths of 1.5 to 5 m, Victron recommends 70mm²; for 5 to 10 m, 140mm². Victron does not specify a fuse rating, but the DC cables must be fused. Ground the housing. Connect the 230V output via a G-ST18i plug. Communication: VE.Bus with two RJ45 ports for remote control, parallel and three-phase operation. Configuration via the DIP switches or with VEConfigure and VictronConnect via an MK3 USB interface. Monitoring via a GX device and the VRM Portal – Victron Energy (https://vrm.victronenergy.com/login). The programmable relay acts as an alarm relay by default and switches 230V/4A AC, 4A up to 35 VDC, or 1A up to 60 VDC. Remote on/off via an external switch on the two-pole terminal. Other: The inverter does not have an automatic transfer switch. For automatic switching between shore power or generator and inverter, Victron refers to a MultiPlus or Quattro. The output neutral is connected to the housing, ensuring that a residual current device (RCD) operates in the output. Included: 1.5 m (35mm²) battery cables, attached to the unit. Can be ordered directly with this * Red battery cable 70mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-rood-70mm-per-meter.html), KABRD0107000 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Black battery cable 70mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-zwart-70mm-per-meter.html), KABZW0107000 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Crimp cable lug 70mm² > M8 (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/perskabeloog-70mm-m8.html), PSKABOG00071 (category Crimp cable lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/)) * MEGA-fuse fuse holder 2xM8 (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/mega-fuse-zekeringhouder2xm8.html), ZEKHD0000200 (category Fuse holders (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/)) * Mega fuse holder M8 35-300A (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/mega-zekeringhouder-m8-35-300a.html), ZEKHD0000800 (category Fuse holders (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/)) * Victron Phoenix Inverter Control (https://shop.top.systems/monitoring-control/controlpanels/victron-phoenix-inverter-control.html), REC030001210 (category Control panels (https://shop.top.systems/monitoring-control/controlpanels/)) * Victron Digital Multi Control 200/200A (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a.html), REC020005010 (category Control panels (https://shop.top.systems/monitoring-control/controlpanels/)) * Victron Ekrano GX (https://shop.top.systems/monitoring-control/controlspanelen/victron-ekrano-gx.html), BPP900480100 (category Control panels (https://shop.top.systems/monitoring-control/controlpanels/)) * TS Enovations IMD3+ Insulation Monitor (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/ts-enovations-imd3-isolatiebewaker.html), SHP302501460 (category Insulation Monitors (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/)) Related products * Victron Inverter 12/2000 Compact (https://shop.top.systems/omvormen-laden/omvormen-dc-ac/victron-omvormer-12-2000-compact.html), CIN122200000 * Victron Inverter 12/3000 (https://shop.top.systems/omvormen-laden/omvormen-dc-ac/victron-omvormer-12-3000.html), PIN123020000 * Victron Inverter 12/1200 Compact (https://shop.top.systems/omvormen-laden/omvormen-dc-ac/victron-omvormer-12-1200-compact.html), CIN122120000 Documentation * Datasheet inverters 1200VA – 5000VA (NL) (https://www.victronenergy.com/upload/documents/Datasheet-Inverter-1200VA-5000VA-NL.pdf) * Datasheet inverters 1200VA – 5000VA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Inverter-1200VA-5000VA-EN.pdf) * Manual Compact inverter 1200 – 1600 (multilingual, incl. NL and EN) (https://www.victronenergy.com/upload/documents/Manual-Inverter-Compact-1200-1600-EN-NL-FR-DE-ES-IT-.pdf) * Quick Installation Guide Phoenix Inverter Compact 12/24V 1200VA – 1600VA (EN) (https://www.victronenergy.com/upload/documents/Quick-Install-Guide-Compact-Phoenix-Inverter-12V-24V-1200VA-1600VA-EN.pdf) * Dimensions Inverter Compact 12V 24V 1200VA – 1600VA (https://www.victronenergy.com/upload/documents/Inverter-Compact-12V-24V-1200VA-1600VA.pdf) * EU Declaration of Conformity Inverters 1200VA – 5000VA (https://www.victronenergy.com/upload/documents/Inverter-1200VA–5000VA-2023-10-11.pdf) * ECE R10-6 12V MultiPlus Compact Certificate and inverters (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-12V-MultiPlus-Compacts-&-Inverters.pdf) * Victron Energy ISO 9001 Certificate (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Videos * Did You Know – Reduce power consumption of an inverter in standby (EN) (https://www.youtube.com/watch?v=v0s0x0hf66I) Q&A Which DC fuse should I use? Victron does not specify a fuse value in the datasheet or in the manual, but it does stipulate that the DC cables be fused. Which battery cable should I use for longer distances? For 1.5 to 5 m, Victron recommends 70mm²; for 5 to 10 m, 140mm². The fixed 1.5 m cable is 35mm². Can I combine this inverter with another type or power rating? No, parallel and three-phase only with identical devices, a maximum of six, with DC cables of equal length and cross-section. Does three-phase also work in delta configuration? No, only in star configuration. You configure up to three devices using VE.Bus Quick Configure; from four using VE.Bus System Configurator. How do I reduce standby consumption? With search mode (2W, off below 40W and back on above 100W) or AES mode (5W); both only with a device operating independently. Can I connect two remote controls at the same time? No, only one remote control may be connected at a time, to one of the two RJ45 ports or via the remote on/off terminal. Contact Are you unsure about the cable cross-section, protection, or construction of a parallel or three-phase system? Feel free to contact us; we are happy to help you think through your installation. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Battery voltage 12V DC input range 9.5-17V Nominal power 1600VA Continuous power 25/40/65 °C 1300W / 1200W / 800W Peak power 3000W Output voltage 230 VAC ±2%, adjustable 210-245V Frequency 50 Hz ±0.1%, switchable to 60 Hz Waveform Pure sine wave Maximum efficiency 92% No-load power / AES / search mode 8W / 5W / 2W Communication VE.Bus, 2x RJ45 Parallel / three-phase Yes, up to 6 identical devices; Three-phase star configuration Programmable relay 230V/4A AC, 4A up to 35 VDC, 1A up to 60 VDC Remote on/off Yes Battery connection Battery cables 1.5 m (35mm²) included AC connection G-ST18i plug Housing Aluminum, blue RAL 5012 Protection class IP21 Operating temperature -40 to +65 °C, fan-cooled Dimensions (hxwxd) 375 x 214 x 110 mm Weight 10 kg Standards EN 60335-1, EN 55014-1, EN 55014-2 Warranty 5 years EAN 8719076065043 We would be happy to provide you with more information about this product. Please contact us contact join us.
an electric sloop? See our full range.