Victron Inverter 24/375 VE.Direct Schuko

Victron Inverter 24/375 VE.Direct Schuko

Victron Inverter 24/375 VE.Direct Schuko For 24 V installations where a laptop, cool box, tools, or pump occasionally needs to run on 230 V. Compact enough for a delivery van or cabin, economical enough to remain permanently switched on: in ECO mode, standby consumption is only 1.4 W. Pure sine wave The output voltage is a true sine wave of 230 V ±3%, adjustable between 210 and 245 V, with a frequency of 50 or 60 Hz ±0.1%. This allows even sensitive equipment to run without hum or overheating: chargers, motors, medical equipment, and audio. ECO mode In ECO mode, the inverter switches back to 1.4 W and checks every 2.5 seconds whether a load is switched on. The threshold value is adjustable starting from 15 W. Outside ECO mode, the no-load consumption is 6.1 W. VE.Direct port The inverter can be fully configured and read out via the VE.Direct port: output voltage, frequency, ECO threshold, shutdown and restart voltage. Connection is possible to a GX communication center, a VE.Direct Bluetooth Smart dongle, or the Phoenix Inverter Control panel. Protections The inverter is protected against output short circuits, overload, excessive and insufficient battery voltage, excessive temperature, and excessive DC ripple voltage. Shutdown occurs at 18.6 V, restart at 21.8 V; both values ​​are adjustable. Installation The DC side is connected to screw terminals up to 10 mm². Victron recommends a battery of at least 30 Ah, a cable cross-section of 4 mm² up to 1.5 m, and a 40 A fuse. The housing is IP21 and the device operates from -40 to +65 °C. Can be ordered directly with this * Victron Phoenix Inverter Control (for VE.Direct) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=14&artdetail=REC040010210R) (REC040010210R) * Victron fuse holder for MIDI fuse (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=14&artdetail=CIP000050001) (CIP000050001) * LittelFuse fuse 40A MIDI (12-24V) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=14&artdetail=ZEKLFMIDI040) (ZEKLFMIDI040) * Battery cable red 6mm² 150cm 1 x M8 (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=14&artdetail=KABRD061508M) (KABRD061508M) * Red battery cable 6mm² per meter (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=14&artdetail=KABRD0100600) (KABRD0100600) Related products * Inverter 24/250 VE.Direct Schuko (https://shop.top.systems/omvormen-laden/omvormen-dc-ac/omvormer-24-250-ve-direct-schuko.html) (PIN241251200) * Inverter 24/500 VE.Direct Schuko (https://shop.top.systems/omvormen-laden/omvormen-dc-ac/omvormer-24-500-ve-direct-schuko.html) (PIN241501200) Documentation * Manual Inverter VE.Direct 250VA – 1200VA (multilingual, with NL) (https://www.victronenergy.com/upload/documents/Manual-Inverter-VE.Direct-250VA-1200VA-EN-NL-FR-DE-ES-IT-.pdf) * Datasheet Inverter VE.Direct 250VA – 1600VA (EN) (https://www.victronenergy.com/upload/documents/Datasheet-Inverter-VE.Direct-250VA-1600VA-EN.pdf) * Dimensioning drawing 250VA / 375VA (EN) (https://www.victronenergy.com/upload/documents/Inverter-VE.Direct-12V-24V-48V-250VA-375VA.pdf) * Declaration of Conformity Inverter VE.Direct 250VA – 1200VA (EN) (https://www.victronenergy.com/upload/documents/Inverters-VE.Direct-250VA-1200VA-230V50Hz-and-110V60Hz-2023-10-11.pdf) * Safety Certificate IEC 60335-1 / AS-NZS 4736 (EN) (https://www.victronenergy.com/upload/documents/Certificate-Safety-IEC-60335-1-AS-NZS-4736-Phoenix-Inverter-VE.Direct-250-375-500VA.pdf) * ECE R10-6 Certificate (EN) (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-Inverter-VE.Direct-250VA,-375VA,-500VA.pdf) * ECE R10-4 Certificate (EN) (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-4-–-Phoenix-Inverters-250VA,-375VA,-500VA.pdf) * UL 458 Safety Certificate (EN) (https://www.victronenergy.com/upload/documents/Certificate-Safety-UL-458-Inverter-VE.Direct-250VA-1600VA.pdf) * VE.Direct HEX protocol Phoenix Inverter (EN) (https://www.victronenergy.com/upload/documents/VE.Direct-HEX-Protocol-Phoenix-Inverter.pdf) * ISO 9001 certificate (EN) (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) The manual contains a Dutch section; the datasheet and certificates are available exclusively in English. Videos * Did You Know – Reduce power consumption of an inverter in standby (EN) (https://youtu.be/v0s0x0hf66I) Contact Are you unsure if 375 VA is sufficient for your starting currents, or which fuse and cable cross-section apply? Our specialists will calculate it with you and supply the inverter complete with cabling and protection. Contact us (https://www.top.systems/nl/contact/). Specifications System voltage 24 V DC Nominal power 375 VA Continuous power at 25 °C 300 W Continuous power at 40 °C 260 W Peak power 700 W Output voltage 230 V AC ±3%, adjustable 210 – 245 V Frequency 50 or 60 Hz ±0.1%, adjustable Waveform pure sine wave Maximum efficiency 89% No-load power 6.1 W No-load power ECO mode 1.4 W ECO mode threshold adjustable from 15 W, interval 2.5 s Input voltage range 18.4 – 34.0 V Low battery voltage shutdown 18.6 V, adjustable Restart voltage 21.8 V, adjustable Battery charged detection 28.0 V, adjustable Communication VE.Direct AC output Schuko (CEE 7/4) DC connection screw terminals, max. 10 mm² Recommended battery capacity from 30 Ah Recommended DC cable and fuse 4 mm² up to 1.5 m, 40 A fuse Protections short circuit, overload, battery voltage too high or too low, temperature, DC ripple Operating temperature -40 °C to +65 °C Protection class IP21 Dimensions (hxwxd) 86 x 165 x 260 mm Weight 3 kg EAN 8719076055976 We would be happy to provide you with more information about this product. Please contact us contact join us.