Victron measuring coil with range 100A – 50 mA, equipped with socket connection and cable length 20 meters.

Victron measuring coil with range 100A – 50 mA, equipped with socket connection and cable length 20 meters.

Victron measuring coil with range 100A – 50 mA, equipped with socket connection and a cable length of 20 meters. Victron measuring coil 100A-50mA with jack connection, 20 meters. External measuring coil with a measurement ratio of 100 A to 50 mA for the MultiPlus-II and MultiGrid-II, with a cable length of 20 meters. Required to utilize PowerControl and PowerAssist and to optimize self-consumption with external current monitoring. Version with jack connector. Applications: In many buildings, the inverter-charger is located nowhere near the meter cabinet: garage, attic, outbuilding. Twenty meters of cable bridges this distance without extension and without additional connections that could interfere with the measurement. This way, you measure where it is necessary — at the main connection — and the installation remains within the available grid capacity. * Homes and commercial buildings with the meter cabinet far from the technical room * ESS installations in existing buildings without a short cable run * PowerControl and PowerAssist on a limited mains connection * Yachts and larger vehicles with a long cable run to the shore power input Design and connection * Jack connector, directly into the external power input of the inverter-charger * Cable length 20 meters * Measurement ratio 100 A : 50 mA * Maximum current 32 A Jack connector or wire ends Victron supplies two versions: with a jack connector and with free wire ends. According to the manufacturer, the jack version is intended for the older MultiPlus-II models. Therefore, please check which connection your device has before ordering; both versions are available in 1, 5, and 20 meters. Related products * Victron measuring coil 100A-50mA, jack connector, 1 meter (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb.html) (CTR110000500) * Victron measuring coil 100A-50mA, jack connector, 5 meters (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb-1.html) (CTR110000550) * Victron measuring coil 100A-50mA, wire ends, 1 meter (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-draadein-2.html) (CTR120000500) Documentation Victron Energy does not publish a separate manual or datasheet for this item; the specifications and application are included in the MultiPlus-II documentation. This is in English. * Victron product page Current Transformer for MultiPlus-II (EN) (https://www.victronenergy.com/meters-and-sensors/current-transformer-for-multiplus-ii) * MultiPlus-II datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-II-inverter-charger-EN.pdf) * Datasheet via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Datasheets/CTR1xxxxxxxx.pdf) Contact Are you unsure about the cable routing or the correct connection to your device? Our specialists will review the schematic with you and supply the appropriate measuring coil. Contact us (https://www.top.systems/nl/contact/). Specifications Measurement ratio 100 A : 50 mA Maximum current 32 A Connection Jack connector Cable length 20 m Application MultiPlus-II and MultiGrid-II, external current sensing Functions PowerControl, PowerAssist, self-consumption optimization Brand Victron Energy EAN 8719076057161 Weight 0.7 kg Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.