Victron measuring coil with range 100A – 50 mA, equipped with socket connection and cable length 5 meters.

Victron measuring coil with range 100A – 50 mA, equipped with socket connection and cable length 5 meters.

Victron measuring coil with range 100A – 50 mA, equipped with socket connection and a cable length of 5 meters. Victron measuring coil 100A-50mA with jack connection, 5 meters. External measuring coil with a measurement ratio of 100 A to 50 mA for the MultiPlus-II and MultiGrid-II. Required to utilize PowerControl and PowerAssist and to optimize self-consumption with external current scanning. Version with jack connector and a cable length of 5 meters. Applications: Five meters is the length required by most installations: from the inverter-charger in the technical room to the meter cabinet or main distribution panel next to it. This places the measuring point where it belongs — at the connection — and allows PowerAssist to truly relieve the load on the grid or shore power. No extension work, no extra terminal blocks in the cabinet. * ESS installations with the meter cabinet located a short distance from the inverter-charger * PowerControl and PowerAssist on a limited mains or shore power connection * Optimizing self-consumption with external current sensing * Yachts and motorhomes where the shore power input is located a few meters away Design and connection * Jack connector, directly into the external power input of the inverter-charger * Cable length 5 meters * Measurement ratio 100 A : 50 mA * Maximum current 32 A Jack connector or wire ends Victron supplies two versions: with a jack connector and with open wire ends. According to the manufacturer, the jack version is intended for the older MultiPlus-II models. Therefore, please check which connection your device has before ordering; both versions are available in 1, 5, and 20 meters. Related products * Victron measuring coil 100A-50mA, jack connector, 1 meter (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb.html) (CTR110000500) * Victron measuring coil 100A-50mA, jack connector, 20 meters (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb-2.html) (CTR110002050) * Victron measuring coil 100A-50mA, wire ends, 1 meter (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-draadein-2.html) (CTR120000500) Documentation Victron Energy does not publish a separate manual or datasheet for this item; the specifications and application are listed in the MultiPlus-II documentation. This is in English. * Victron product page Current Transformer for MultiPlus-II (EN) (https://www.victronenergy.com/meters-and-sensors/current-transformer-for-multiplus-ii) * MultiPlus-II datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-II-inverter-charger-EN.pdf) * Datasheet via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Datasheets/CTR1xxxxxxxx.pdf) Contact Are you unsure if five meters is sufficient, or which connection your device has? Our specialists will review your situation with you and supply the correct version. Please contact us (https://www.top.systems/nl/contact/). Specifications Measuring ratio 100 A : 50 mA Maximum current 32 A Connection Jack connector Cable length 5 m Application MultiPlus-II and MultiGrid-II, external current sensing Functions PowerControl, PowerAssist, self-consumption optimization Brand Victron Energy EAN 8719076054634 Weight 0.085 kg Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.