Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection and cable length 1 meter.

Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection and cable length 1 meter.

Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection with a cable length of 1 meter. Victron measuring coil 100A-50mA with threaded ends, 1 meter External measuring coil with a measurement ratio of 100 A to 50 mA for the MultiPlus-II and MultiGrid-II, equipped with free threaded ends and a cable length of 1 meter. Required to utilize PowerControl and PowerAssist and to optimize self-consumption with external current monitoring. Applications The version with threaded ends is the standard for the current MultiPlus-II: directly to the terminal block, no jack plug that can vibrate loose. With a one-meter cable, this is the logical choice when the measurement point is located right next to the inverter-charger. Connect, check external measurement in VEConfigure, done. * Current MultiPlus-II models with terminal connection for external current metering * PowerControl and PowerAssist on a limited mains or shore power connection * Optimizing self-consumption with external current monitoring * Cabinet configuration where the metering point is located directly next to the device Design and connection * Free wired ends for connection to the inverter-charger terminals * Cable length 1 meter * Measurement ratio 100 A : 50 mA * Maximum current 32 A Wireed ends or jack connector Victron supplies two versions. According to the manufacturer, the version with a jack connector is intended for the older MultiPlus-II models; the version with wired ends is the variant for the current devices. Please check which connection your device has before ordering. Both versions are available in 1, 5, and 20 meters. Related products * Victron measuring coil 100A-50mA, jack connector, 1 meter (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb.html) (CTR110000500) * Victron measuring coil 100A-50mA, jack connector, 5 meters (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb-1.html) (CTR110000550) * Victron measuring coil 100A-50mA, jack connector, 20 meters (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb-2.html) (CTR110002050) Documentation Victron Energy does not publish a separate manual or datasheet for this article; the specifications and application are listed in the MultiPlus-II documentation. This is in English. * Victron product page Current Transformer for MultiPlus-II (EN) (https://www.victronenergy.com/meters-and-sensors/current-transformer-for-multiplus-ii) * MultiPlus-II datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-II-inverter-charger-EN.pdf) * Datasheet via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Datasheets/CTR1xxxxxxxx.pdf) Contact Not sure which version fits your device, or how much cable you need? Our specialists will assist you and supply the correct measuring coil. Please contact us (https://www.top.systems/nl/contact/). Specifications Measuring ratio 100 A : 50 mA Maximum current 32 A Connection Free wire ends Cable length 1 m Application MultiPlus-II and MultiGrid-II, external current sensing Functions PowerControl, PowerAssist, self-consumption optimization Brand Victron Energy EAN 8719076059073 Weight 0.055 kg Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.