Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection and cable length 20 meters.

Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection and cable length 20 meters.

Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection and a cable length of 20 meters. Victron measuring coil 100A-50mA with threaded ends, 20 meters External measuring coil with a measurement ratio of 100 A to 50 mA for the MultiPlus-II and MultiGrid-II, equipped with free threaded ends and a cable length of 20 meters. Required to utilize PowerControl and PowerAssist and to optimize self-consumption with external current monitoring. Applications In existing buildings, the inverter-charger is rarely located next to the meter cabinet: garage, attic, outbuilding. Twenty meters of cable bridges that distance in one piece, without junction boxes or extensions that could interfere with the measurement. This way, you measure where it is necessary — at the main connection — and the installation remains neatly within the available grid capacity. * Homes and commercial buildings with the meter cabinet far from the technical room * ESS installations in existing buildings without a short cable run * PowerControl and PowerAssist on a limited grid connection * Yachts and larger vehicles with a long cable run to the shore power input Design and connection * Free threaded ends for connection to the inverter-charger terminals * Cable length 20 meters * Measurement ratio 100 A : 50 mA * Maximum current 32 A Threaded ends or jack connector Victron supplies two versions. According to the manufacturer, the version with threaded ends is intended for the current MultiPlus-II and the MultiPlus 20kW; the jack version is for the older MultiPlus-II models. Please check which connection your device has before ordering. Both versions are available in 1, 5, and 20 meters. Need more than 100 A? For higher connection values, Victron supplies a version with a measurement ratio of 400 A to 50 mA and 10 meters of cable. Related products * Victron measuring coil 100A-50mA, threaded rods, 5 meters (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-draadein-1.html) (CTR120000550) * Victron measuring coil 100A-50mA, jack connector, 20 meters (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb-2.html) (CTR110002050) * Victron measuring coil 400A-50mA, threaded rods, 10 meters (https://shop.top.systems/installatie/sensoren/victron-stroomomvormer-400a-50ma-multiplus-ii-10-meter-draadei.html) (CTR140050100) Documentation Victron Energy does not publish a separate manual or datasheet for this item; the specifications and application are included in the MultiPlus-II documentation. This is in English. * Victron product page Current Transformer for MultiPlus-II (EN) (https://www.victronenergy.com/meters-and-sensors/current-transformer-for-multiplus-ii) * MultiPlus-II datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-II-inverter-charger-EN.pdf) * Datasheet via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Datasheets/CTR1xxxxxxxx.pdf) Contact Are you unsure about the cable routing, the measurement ratio, or the correct connection to your device? Our specialists will review the schematic with you and supply the appropriate measuring coil. Contact us (https://www.top.systems/nl/contact/). Specifications Measurement ratio 100 A : 50 mA Maximum current 32 A Connection Free wire ends Cable length 20 m Application MultiPlus-II and MultiGrid-II, external current sensing Functions PowerControl, PowerAssist, self-consumption optimization Brand Victron Energy EAN 8719076059097 Weight 0.7 kg Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.