Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection and cable length 5 meters.

Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection and cable length 5 meters.

Victron measuring coil with range 100A – 50 mA, equipped with threaded end connection and a cable length of 5 meters. Victron measuring coil 100A-50mA with threaded ends, 5 meters. External measuring coil with a measurement ratio of 100 A to 50 mA for the MultiPlus-II and MultiGrid-II, equipped with free threaded ends and a cable length of 5 meters. Required to utilize PowerControl and PowerAssist and to optimize self-consumption with external current monitoring. Applications: Five meters with threaded ends is the combination that fits in most new installations: the inverter-charger in the technical room, the measuring point in the adjacent meter cabinet, and simply on the terminal block on the device. No extension work, no jack plug that can vibrate loose. This allows the system to see what is actually flowing through the main connection, and PowerAssist can step in before the fuse blows. * ESS installations with the meter cabinet located a short distance from the inverter-charger * PowerControl and PowerAssist on a limited mains or shore power connection * Optimizing self-consumption with external current sensing * Yachts and motorhomes where the shore power input is located a few meters away Design and connection * Free threaded ends for connection to the inverter-charger terminals * Cable length 5 meters * Measurement ratio 100 A : 50 mA * Maximum current 32 A Threaded ends or jack connector Victron supplies two versions. According to the manufacturer, the version with threaded ends is intended for the current MultiPlus-II and the MultiPlus 20kW; the jack version is for the older MultiPlus-II models. Please check which connection your device has before ordering. Both versions are available in 1, 5, and 20 meters. Related products * Victron measuring coil 100A-50mA, threaded ends, 1 meter (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-draadein-2.html) (CTR120000500) * Victron measuring coil 100A-50mA, threaded ends, 20 meters (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-draadein.html) (CTR120002050) * Victron measuring coil 100A-50mA, jack connector, 5 meters (https://shop.top.systems/installatie/sensoren/victron-meetspoel-met-bereik-100a-50-ma-voorzien-van-contactb-1.html) (CTR110000550) Documentation Victron Energy does not publish a separate manual or datasheet for this item; the specifications and application are listed in the MultiPlus-II documentation. This is in English. * Victron product page Current Transformer for MultiPlus-II (EN) (https://www.victronenergy.com/meters-and-sensors/current-transformer-for-multiplus-ii) * MultiPlus-II datasheet (EN, PDF) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-II-inverter-charger-EN.pdf) * Datasheet via our product page (PDF) (https://shop.top.systems/_clientfiles/Documents/Datasheets/CTR1xxxxxxxx.pdf) Contact Not sure which version fits your device or how much cable you need? Our specialists will review the schematic with you and supply the correct measuring coil. Contact us (https://www.top.systems/nl/contact/). Specifications Measurement ratio 100 A : 50 mA Maximum current 32 A Connection Free wire ends Cable length 5 m Application MultiPlus-II and MultiGrid-II, external current sensing Functions PowerControl, PowerAssist, self-consumption optimization Brand Victron Energy EAN 8719076059080 Weight 0.085 kg Warranty 5 years We would be happy to provide you with more information about this product. Please contact us contact join us.