Victron MultiPlus 12/1600/70-16

Victron MultiPlus 12/1600/70-16

Victron MultiPlus 12/1600/70-16 Combination of pure sine wave inverter, battery charger, and automatic transfer switch for vessels, vehicles, service vehicles, industrial and infrastructure installations. With shore power or a generator, the 12/1600 (1600VA) automatically switches over and charges the battery bank; if the mains voltage fails, the inverter takes over the consumers. PowerAssist supplements a limited shore power connection. Battery voltage Suitable for 12V battery banks, with a DC input range of 9.5-17V. The AC input accepts 187-265 VAC at 45-65 Hz. The output delivers 230 VAC ±2% ​​at 50 Hz ±0.1%. Continuous power 1300W at 25°C (1600VA), 1100W at 40°C and 800W at 65°C, with a peak power of 2800W. No-load consumption is 10W, 3W in search mode. The automatic transfer switch handles 16A. PowerControl limits the charging current in case of a limited shore power connection; PowerAssist supplements this connection from the battery bank. Battery charger: Charging current 70A for the house battery and a separate 1A output to recharge the starter battery. Standard charging voltages: 14.4V absorption, 13.8V float, and 13.2V storage. With a battery temperature sensor, the unit charges with temperature compensation. Connectable: Up to six units can be connected in parallel for increased power, and three units together form a 3-phase star configuration, connected via RJ45 UTP cables. Remote operation via a Digital Multi Control or an external on/off switch. Monitoring with a GX device and a BMV battery monitor. Construction: Steel and ABS housing with IP21 rating, suitable only for dry indoor spaces. Fan cooling. Protected against short circuits and output overload, excessive or low battery voltage, excessive temperature, 230 VAC on the output, and excessive ripple voltage on the input. 230 VAC connection via a G-ST18i connector. Installation: The manual specifies a 50mm² battery cable for a cable length of 1.5-5 meters, with a 200A DC fuse located close to the battery in the positive cable. The manual does not provide a value for longer cables. The device operates exclusively on a 12V battery bank; separate models exist for 24V and 48V. VE.Bus port communication for parallel and 3-phase operation, for control panels, and for connection to a GX device with access to the VRM Portal – Victron Energy (https://vrm.victronenergy.com/login). With the VE.Bus Smart dongle, you configure and read out the device using the VictronConnect app on your smartphone. The programmable relay switches 230V/4A AC or 4A up to 35 VDC. Can be ordered directly with this item: * Red battery cable 50mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-rood-50mm-per-meter.html), KABRD0105000 – Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Black battery cable 50mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-zwart-50mm-per-meter.html), KABZW0105000 – Battery cables (https://shop.top.systems/installatie/kabels/accu/) * Crimp cable lug 50mm² > M8 (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/perskabeloog-50mm-m8.html), PSKABOG00051 – Crimp cable lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/) * LittelFuse fuse 200A MEGA (12-24V) (https://shop.top.systems/beveiligen-schakelen/zekeringen/littelfuse-zekering-200a-mega-12-24v.html), ZEKLFM000200 – Fuses (https://shop.top.systems/beveiligen-schakelen/zekeringen/) * MEGA-fuse fuse holder 2xM8 (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/mega-fuse-zekeringhouder2xm8.html), ZEKHD0000200 – Fuse holders (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/) * Victron VE.Bus Smart dongle (https://shop.top.systems/monitoring-control/draadloos/victron-ve-bus-smart-dongle.html), ASS030537010 – Wireless (https://shop.top.systems/monitoring-control/draadloos/) * Victron Digital Multi Control 200/200A (https://shop.top.systems/monitoring-control/controlpanels/victron-digital-multi-control-200-200a.html), REC020005010 – Control panels (https://shop.top.systems/monitoring-control/controlpanels/) * Victron Digital Multi Control 200/200A GX (90º) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=DMC000200010R), DMC000200010R – Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/) * Victron Battery Monitor BMV-712 Smart (https://shop.top.systems/monitoring-controle/accumonitors/victron-batterij-monitor-bmv-712-smart.html), BAM030712000R – Battery Monitors (https://shop.top.systems/monitoring-controle/accumonitors/) * TS Enovations IMD3+ Insulation Monitor (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/ts-enovations-imd3-isolatiebewaker.html), SHP302501460 – Insulation Monitors (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/) * Red Insulation Cap 35/50mm² (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP222N4V02), ISKP222N4V02 – Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Insulation cap black 35/50mm² (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ISKP222N4V14), ISKP222N4V14 – Insulation caps (https://shop.top.systems/installatie/accessoires-kabels/isolatiekappen/) * Heat shrink tubing red 50cm for 35/50/70mm battery cable (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKR01191955), KRKR01191955 – Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) * Black heat shrink tubing 50cm for 35/50/70mm battery cable (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=KRKZ01191955), KRKZ01191955 – Heat shrink tubing (https://shop.top.systems/installatie/accessoires-kabels/krimpkousen/) Related products * Victron MultiPlus 12/2000/80-32 (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-multiplus-12-2000-80-32.html), PMP122200000 * Victron MultiPlus 12/3000/120-16 (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-multiplus-12-3000-120-16.html), PMP122300001 * Victron MultiPlus 12/3000/120-50 (https://shop.top.systems/omvorm-laden/omvorm-laden-combi/victron-multiplus-12-3000-120-50.html), PMP123021010 * Victron MultiPlus 12/1200/50-16 (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/victron-multiplus-12-1200-50-16.html), PMP122120000 Documentation * MultiPlus 1600VA Manual (NL/EN/FR/DE/ES/IT) (https://www.victronenergy.com/upload/documents/Manual-MultiPlus-1600VA-EN-NL-FR-DE-ES-IT.pdf) * MultiPlus 500VA – 2000VA Datasheet (EN) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-500VA-2000VA-EN.pdf) * MultiPlus 12V/24V/48V 1600VA Dimensions (https://www.victronenergy.com/upload/documents/MultiPlus-12V-24V-48V-1600VA.PDF) * Automotive ECE R10-6 Certificate MultiPlus 12/1600/70-16 (https://www.victronenergy.com/upload/documents/Certificate-Automotive-ECE-R10-6-MultiPlus-12-1600-70-16.pdf) * Declaration of Conformity MultiPlus 500VA – 2000VA (https://www.victronenergy.com/upload/documents/MultiPlus-500VA-2000VA-2022-07-04.pdf) * Victron Energy ISO 9001 Certificate (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Videos * Did You Know – You can update MultiPlus Firmware using an Android Phone? (EN) (https://youtu.be/AEPmjkyg7UY) Question & Answer Which type of DC fuse fits between the battery and the inverter? A 200A fuse; for the 12V 1600VA, the manual mentions a MIDI or BF1 fuse (32V) in the positive cable, close to the battery. What does PowerAssist do? In the event of a limited shore power or generator connection, the inverter briefly supplements power from the battery bank so that the fuse on shore does not trip. Can the output be set to 60 Hz? Yes, the output is adjustable to 60 Hz and 240 VAC. Would you like to know how this device fits into your installation, or which cables, fuses, and controls you need with it? Feel free to contact us. We are happy to help with the installation and create a suitable proposal. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Battery voltage 12V Continuous power at 25°C 1300W (1600VA) Continuous power at 40°C / 65°C 1100W / 800W Peak power 2800W House battery charging current 70A Starter battery charging current 1A Automatic transfer switch 16A PowerControl / PowerAssist Yes DC input range 9.5-17V AC input range 187-265 VAC, 45-65 Hz Output voltage 230 VAC ±2%, 50 Hz ±0.1% Charging voltage absorption / float / storage 14.4V / 13.8V / 13.2V Battery temperature sensor Yes Programmable relay 230V/4A AC, 4A up to 35 VDC, 1A up to 60 VDC Parallel and 3-phase Yes, maximum 6 in parallel Communication VE.Bus Maximum efficiency 93% No-load consumption 10W, search mode 3W Battery connection 50mm² 230 VAC connection G-ST18i connector Operating temperature -40 to +65°C, fan cooling Humidity Max. 95%, non-condensing Housing Steel/ABS Protection class IP21 Dimensions (hxwxd) 465 x 270 x 120 mm Weight 10 kg Standards EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1, EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3, ECE R10-4 We would be happy to provide you with more information about this product. Please take contact join us.