Victron MultiPlus 12/2k/100-32 230V VE.Bus
Victron MultiPlus 12/2k/100-32 230V VE.Bus For 230V consumers up to 2000W continuous in vessels, vehicles, industrial and infrastructure applications, such as single-zone induction cooking, air conditioning, or heavy tools. The 100A charger quickly recharges the 12V battery bank, PowerAssist supplements a limited shore power connection, and switching occurs within 20 ms in the event of a mains outage. Also referred to as 12/2kW. Battery voltage Suitable for 12V battery banks, with a DC input range of 9.5V to 17V. The output delivers 230 VAC ±2% at 50 Hz ±0.1%, adjustable to 60 Hz. The AC input accepts 187-265 VAC at 45-65 Hz. Continuous power 2000W at 25°C, 1800W at 40°C, and 1200W at 65°C; peak power 4000W. Maximum efficiency 93%. No-load power 11W, 3W in search mode. The automatic transfer switch passes through the mains voltage; PowerControl limits the charging current in case of a limited mains connection, and PowerAssist supplements any deficit from the battery. Battery charger: Adaptive four-stage charger with BatterySafe, charging current 100A up to 25°C. Charging voltages: 14.4V absorption, 13.8V trickle, and 13.2V storage. A separate starter battery output delivers a maximum of 1A. Connectable: Up to six units in parallel, or in a three-phase configuration. Two RJ45 VE.Bus ports. Remote control via a Digital Multi Control, the VE.Bus Smart dongle, or a GX device such as the Cerbo GX. Construction Blue housing (RAL 5012), protection class IP21, fan-cooled, operating temperature -40 to +65 °C. It does not contain an internal DC fuse. Protected against short circuit, overload, over- and under-battery voltage, over-temperature, 230 VAC on the inverter output, and excessive ripple voltage on the input. Mounting Victron recommends an external 300A DC fuse and 70mm² battery cable for cable lengths up to 5 m, or 95mm² for lengths from 5 to 10 m. Connect the battery using M8 bolts with 12 Nm. AC connection to screw terminals of maximum 13mm² with 1.6 Nm; use AC cable of at least 6mm². A Type A residual current device is permitted on the output. Communication VE.Bus via two RJ45 ports. Configuration via the DIP switches, via VEConfigure with an MK3 USB interface, or via VictronConnect with the VE.Bus Smart dongle. Monitoring via the VRM Portal – Victron Energy (https://vrm.victronenergy.com/login) with a GX device. The programmable relay (standard alarm relay) switches 230V/4A AC, 4A up to 35 VDC, or 1A up to 60 VDC. Remote on/off is possible. General: When mains voltage is present, the automatic transfer switch passes through the AC voltage and the combination charges the battery. If the mains fails, the inverter takes over the power supply within 20 ms. Can be ordered directly with this * Red battery cable 70mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-rood-70mm-per-meter.html), KABRD0107000 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Black battery cable 70mm² per meter (https://shop.top.systems/installatie/kabels/accu/accukabel-zwart-70mm-per-meter.html), KABZW0107000 (category Battery cables (https://shop.top.systems/installatie/kabels/accu/)) * Crimp cable lug 70mm² > M8 (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/perskabeloog-70mm-m8.html), PSKABOG00071 (category Crimp cable lugs (https://shop.top.systems/installatie/accessoires-kabels/perskabelogen/)) * LittelFuse fuse 300A MEGA (12-24V) (https://shop.top.systems/beveiligen-schakelen/zekeringen/littelfuse-zekering-300a-mega-12-24v.html), ZEKLFM000300 (category Fuses (https://shop.top.systems/beveiligen-schakelen/zekeringen/)) * Mega fuse holder M8 35-300A (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/mega-zekeringhouder-m8-35-300a.html), ZEKHD0000800 (category Fuse holders (https://shop.top.systems/beveiligen-schakelen/zekeringhouders/)) * Victron VE.Bus Smart dongle (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ASS030537010), ASS030537010 * Victron interface MK3-USB (VE.Bus to USB) (https://shop.top.systems/default.asp?pageid=88&webgroupfilter=16&artdetail=ASS030140000-C), ASS030140000-C * Victron Digital Multi Control 200/200A (https://shop.top.systems/monitoring-control/controlpanelen/victron-digital-multi-control-200-200a.html), REC020005010 (category Control Panels (https://shop.top.systems/monitoring-control/controlpanels/)) * Victron Digital Multi Control 200/200A GX (90º) (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-digital-multi-control-200-200a-gx-90.html), DMC000200010R (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * Victron Cerbo GX MK2 (https://shop.top.systems/monitoring-controle/bedieningspanelen/victron-cerbo-gx-mk2.html), BPP900451100 (category Control panels (https://shop.top.systems/monitoring-controle/bedieningspanelen/)) * TS Enovations IMD3+ Insulation monitor (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/ts-enovations-imd3-isolatiebewaker.html), SHP302501460 (category Insulation monitors (https://shop.top.systems/beveiligen-schakelen/isolatiebewakers/)) Related products * Victron MultiPlus 12/3000/120-16 (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/victron-multiplus-12-3000-120-16.html), PMP122300001 * Victron MultiPlus 12/3000/120-50 (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/victron-multiplus-12-3000-120-50.html), PMP123021010 * Victron MultiPlus 12/1600/70-16 (https://shop.top.systems/omvormen-laden/omvormen-laden-combi/victron-multiplus-12-1600-70-16.html), PMP122160000 Documentation * Datasheet MultiPlus 2kW 230V (NL) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-2kW-230V-NL.pdf) * Datasheet MultiPlus 2kW 230V (EN) (https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-2kW-230V-EN.pdf) * Manual MultiPlus 2kW 230V (NL) (https://www.victronenergy.com/upload/documents/MultiPlus_2kW_230V/24547-MultiPlus_2kVA-pdf-nl.pdf) * Manual MultiPlus 2kW 230V (EN) (https://www.victronenergy.com/upload/documents/MultiPlus_2kW_230V/24547-MultiPlus_2kVA-pdf-en.pdf) * Online manual MultiPlus 2kW 230V (NL) (https://www.victronenergy.com/media/pg/MultiPlus_2kW_230V/nl/index-nl.html) * Online manual MultiPlus 2kW 230V (EN) (https://www.victronenergy.com/media/pg/MultiPlus_2kW_230V/en/index-en.html) * VE.Bus parallel, split, and three-phase systems (EN) (https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems) * VE.Bus error codes (EN) (https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes) * Victron Energy ISO 9001 certificate (https://www.victronenergy.com/upload/documents/ISO9001-certificate-2024-EN.pdf) Q&A Which fuse and battery cable should I use? Victron recommends a 300A DC fuse and 70mm² for up to 5 m or 95mm² for 5 to 10 m. There is no internal DC fuse. Can I connect multiple units in parallel or in three-phase? Yes, up to six units; with the two VE.Bus ports, no splitter is required. Which RCD may be installed on the output? Type A is permitted. Connect the housing to earth or the chassis. How much current does the starter battery output supply? Maximum 1A, sufficient to keep a starter battery charged. What does the search mode provide? Without load, the no-load power drops from 11W to 3W. Contact Would you like to know which cable, fuse, or remote control belongs to your installation, or how to configure PowerAssist for your shore power or generator? Feel free to contact us; we are happy to help you think about your system. Contact Top Systems (https://www.top.systems/nl/contact/). Specifications Battery voltage 12V DC input range 9.5-17V Continuous power 25/40/65 °C 2000W / 1800W / 1200W Peak power 4000W House battery charging current 100A Starter battery charging current 1A Charging voltage absorption/trickle/storage 14.4V / 13.8V / 13.2V Maximum efficiency 93% No-load power / search mode 11W / 3W PowerControl / PowerAssist Yes / Yes AC input 187-265 VAC, 45-65 Hz Output voltage 230 VAC ±2%, 50 Hz ±0.1% Communication VE.Bus, 2x RJ45 Parallel / three-phase Up to 6 units Programmable relay 230V/4A AC, 4A up to 35 VDC, 1A up to 60 VDC Internal DC fuse None Recommended DC fuse 300A Battery cable 0-5 m / 5-10 m 70mm² / 95mm² Battery connection M8 bolts, 12 Nm AC connection Screw terminals max. 13mm², 1.6 Nm Protection class IP21 Operating temperature -40 to +65 °C, fan-cooled Dimensions (hxwxd) 506 x 236 x 147 mm Weight 15.5 kg Standards EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 Warranty 5 years EAN 8719076079651 We would be happy to provide you with more information about this product. Please contact us
contact join us.
